! Started logfile: J0819-0630_S_2007_01_11_yyk_uvs.log on Mon Jun 16 19:25:38 2008 obs J0819-0630_S_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J0819-0630_S_2007_01_11_yyk_uve.fits ! AN table 1: 17 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.70098 visibilities/baseline/integration-bin. ! Found source: J0819-0630 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2249 lines of history. ! ! Reading 1716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0819-0630_S_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.147949 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.274 mas, bmaj=6.183 mas, bpa=-0.8043 degrees ! Estimated noise=1.43897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961139 Jy ! Component: 100 - total flux cleaned = 0.125572 Jy ! Total flux subtracted in 100 components = 0.125572 Jy ! Clean residual min=-0.007373 max=0.010774 Jy/beam ! Clean residual mean=0.000140 rms=0.002400 Jy/beam ! Combined flux in latest and established models = 0.125572 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.125572 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.077945Jy sigma=1.177166 ! Fit after self-cal, rms=0.076385Jy sigma=1.158024 ! Inverting map and beam ! Estimated beam: bmin=2.274 mas, bmaj=6.184 mas, bpa=-0.8046 degrees ! Estimated noise=1.43889 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=7.389 mas, bpa=-2.688 degrees ! Estimated noise=1.01163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265518 Jy ! Component: 100 - total flux cleaned = 0.0384041 Jy ! Component: 150 - total flux cleaned = 0.0443768 Jy ! Component: 200 - total flux cleaned = 0.0475264 Jy ! Total flux subtracted in 200 components = 0.0475264 Jy ! Clean residual min=-0.004921 max=0.006573 Jy/beam ! Clean residual mean=0.000061 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.173098 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 56 components and 0.173098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070611Jy sigma=1.032182 ! Fit after self-cal, rms=0.070527Jy sigma=1.031191 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.957 x 7.389 at -2.688 degrees (North through East) ! Clean map min=-0.0046722 max=0.12081 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00199 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.98 KP 1.00* ! LA 1.03 MK 1.06 OV 0.93 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01043 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.96 KP 1.00* ! LA 0.93 MK 0.91 OV 1.02 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.994946 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.99 KP 1.00* ! LA 1.00 MK 0.95 OV 1.03 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.070527Jy sigma=1.031191 ! Fit after self-cal, rms=0.070097Jy sigma=1.024171 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070097Jy sigma=1.024171 ! Fit after self-cal, rms=0.070038Jy sigma=1.023464 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.517 mas, bpa=-3.639 degrees ! Estimated noise=1.00774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485593 Jy ! Component: 100 - total flux cleaned = 0.000646302 Jy ! Component: 150 - total flux cleaned = 0.000690503 Jy ! Component: 200 - total flux cleaned = 0.000731615 Jy ! Total flux subtracted in 200 components = 0.000731615 Jy ! Clean residual min=-0.004488 max=0.005039 Jy/beam ! Clean residual mean=0.000021 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.17383 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.17383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069967Jy sigma=1.022219 ! Fit after self-cal, rms=0.069908Jy sigma=1.021469 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069908Jy sigma=1.021469 ! Fit after self-cal, rms=0.063007Jy sigma=0.925879 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214624 Jy ! Component: 100 - total flux cleaned = 0.00195334 Jy ! Component: 150 - total flux cleaned = 0.00195361 Jy ! Component: 200 - total flux cleaned = 0.00195372 Jy ! Total flux subtracted in 200 components = 0.00195372 Jy ! Clean residual min=-0.003999 max=0.004690 Jy/beam ! Clean residual mean=0.000030 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.175783 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.175783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062809Jy sigma=0.923687 ! Fit after self-cal, rms=0.062170Jy sigma=0.917633 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 7.517 at -3.639 degrees (North through East) ! Clean map min=-0.0038143 max=0.1232 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062170Jy sigma=0.917633 ! Fit after self-cal, rms=0.060882Jy sigma=0.912305 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060882Jy sigma=0.912305 ! Fit after self-cal, rms=0.060733Jy sigma=0.911309 ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=7.45 mas, bpa=-3.527 degrees ! Estimated noise=1.00333 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000408187 Jy ! Component: 100 - total flux cleaned = 0.000565656 Jy ! Component: 150 - total flux cleaned = 0.000636931 Jy ! Component: 200 - total flux cleaned = 0.000738062 Jy ! Total flux subtracted in 200 components = 0.000738062 Jy ! Clean residual min=-0.003989 max=0.004384 Jy/beam ! Clean residual mean=0.000007 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.176521 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.176521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060697Jy sigma=0.910669 ! Fit after self-cal, rms=0.060654Jy sigma=0.910373 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060654Jy sigma=0.910373 ! Fit after self-cal, rms=0.061039Jy sigma=0.905338 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061039Jy sigma=0.905338 ! Fit after self-cal, rms=0.061032Jy sigma=0.905132 ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.453 mas, bpa=-4.095 degrees ! Estimated noise=1.00557 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771429 Jy ! Component: 100 - total flux cleaned = 0.000894117 Jy ! Component: 150 - total flux cleaned = 0.000924483 Jy ! Component: 200 - total flux cleaned = 0.000952254 Jy ! Total flux subtracted in 200 components = 0.000952254 Jy ! Clean residual min=-0.004006 max=0.004151 Jy/beam ! Clean residual mean=0.000010 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.177474 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 81 components and 0.177474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060979Jy sigma=0.904332 ! Fit after self-cal, rms=0.060971Jy sigma=0.904236 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.528 mas, bmaj=13.49 mas, bpa=10.24 degrees ! Estimated noise=1.36712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834447 Jy ! Component: 100 - total flux cleaned = 0.000926515 Jy ! Component: 150 - total flux cleaned = 0.00096632 Jy ! Component: 200 - total flux cleaned = 0.00104007 Jy ! Total flux subtracted in 200 components = 0.00104007 Jy ! Clean residual min=-0.005447 max=0.005240 Jy/beam ! Clean residual mean=0.000001 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.178514 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 84 components and 0.178514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060985Jy sigma=0.904282 ! Fit after self-cal, rms=0.060962Jy sigma=0.903853 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.26 mas, bmaj=6.211 mas, bpa=-1.436 degrees ! Estimated noise=1.43059 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0997265 Jy ! Component: 100 - total flux cleaned = 0.129204 Jy ! Component: 150 - total flux cleaned = 0.145805 Jy ! Component: 200 - total flux cleaned = 0.156115 Jy ! Total flux subtracted in 200 components = 0.156115 Jy ! Clean residual min=-0.005380 max=0.006301 Jy/beam ! Clean residual mean=0.000060 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.156115 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.156115 Jy ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.453 mas, bpa=-4.095 degrees ! Estimated noise=1.00557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123773 Jy ! Component: 100 - total flux cleaned = 0.0187904 Jy ! Component: 150 - total flux cleaned = 0.0226016 Jy ! Component: 200 - total flux cleaned = 0.0250827 Jy ! Total flux subtracted in 200 components = 0.0250827 Jy ! Clean residual min=-0.003918 max=0.003105 Jy/beam ! Clean residual mean=-0.000015 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.181197 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 85 components and 0.181197 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.528 mas, bmaj=13.49 mas, bpa=10.24 degrees ! Estimated noise=1.36712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268999 Jy ! Component: 100 - total flux cleaned = 0.00315552 Jy ! Component: 150 - total flux cleaned = 0.00344035 Jy ! Component: 200 - total flux cleaned = 0.00344211 Jy ! Total flux subtracted in 200 components = 0.00344211 Jy ! Clean residual min=-0.004558 max=0.003372 Jy/beam ! Clean residual mean=-0.000097 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.184639 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 0.184639 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.453 mas, bpa=-4.095 degrees ! Estimated noise=1.00557 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184577 Jy ! Component: 100 - total flux cleaned = -0.000143036 Jy ! Component: 150 - total flux cleaned = -7.1311e-05 Jy ! Component: 200 - total flux cleaned = -7.04012e-05 Jy ! Total flux subtracted in 200 components = -7.04012e-05 Jy ! Clean residual min=-0.003714 max=0.003288 Jy/beam ! Clean residual mean=-0.000039 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.184569 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 124 components and 0.184569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060580Jy sigma=0.897038 ! Fit after self-cal, rms=0.060526Jy sigma=0.896205 wmodel J0819-0630_S_2007_01_11_yyk\_map.mod ! Writing 124 model components to file: J0819-0630_S_2007_01_11_yyk_map.mod wobs J0819-0630_S_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J0819-0630_S_2007_01_11_yyk_uvs.fits wwins J0819-0630_S_2007_01_11_yyk\_map.win ! wwins: Wrote 2 windows to J0819-0630_S_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000581323 Jy ! Component: 100 - total flux cleaned = -0.000845525 Jy ! Component: 150 - total flux cleaned = -0.00129422 Jy ! Component: 200 - total flux cleaned = -0.00171918 Jy ! Component: 250 - total flux cleaned = -0.00212045 Jy ! Component: 300 - total flux cleaned = -0.00250419 Jy ! Component: 350 - total flux cleaned = -0.00279376 Jy ! Component: 400 - total flux cleaned = -0.00307134 Jy ! Component: 450 - total flux cleaned = -0.00310899 Jy ! Component: 500 - total flux cleaned = -0.00329476 Jy ! Component: 550 - total flux cleaned = -0.0034042 Jy ! Component: 600 - total flux cleaned = -0.00361567 Jy ! Component: 650 - total flux cleaned = -0.00371901 Jy ! Component: 700 - total flux cleaned = -0.00388568 Jy ! Component: 750 - total flux cleaned = -0.00407966 Jy ! Component: 800 - total flux cleaned = -0.00404689 Jy ! Component: 850 - total flux cleaned = -0.00407837 Jy ! Component: 900 - total flux cleaned = -0.00407883 Jy ! Component: 950 - total flux cleaned = -0.00416689 Jy ! Component: 1000 - total flux cleaned = -0.00419529 Jy ! Component: 1050 - total flux cleaned = -0.00425175 Jy ! Component: 1100 - total flux cleaned = -0.00433474 Jy ! Component: 1150 - total flux cleaned = -0.00436174 Jy ! Component: 1200 - total flux cleaned = -0.00441522 Jy ! Component: 1250 - total flux cleaned = -0.00441483 Jy ! Component: 1300 - total flux cleaned = -0.00444031 Jy ! Component: 1350 - total flux cleaned = -0.0043646 Jy ! Component: 1400 - total flux cleaned = -0.00436456 Jy ! Component: 1450 - total flux cleaned = -0.00448745 Jy ! Component: 1500 - total flux cleaned = -0.00448704 Jy ! Component: 1550 - total flux cleaned = -0.00443995 Jy ! Component: 1600 - total flux cleaned = -0.00453312 Jy ! Component: 1650 - total flux cleaned = -0.00446395 Jy ! Component: 1700 - total flux cleaned = -0.00439632 Jy ! Component: 1750 - total flux cleaned = -0.00448593 Jy ! Component: 1800 - total flux cleaned = -0.00439727 Jy ! Component: 1850 - total flux cleaned = -0.004397 Jy ! Component: 1900 - total flux cleaned = -0.00431073 Jy ! Component: 1950 - total flux cleaned = -0.00426845 Jy ! Component: 2000 - total flux cleaned = -0.0042681 Jy ! Total flux subtracted in 2048 components = -0.00422667 Jy ! Clean residual min=-0.001222 max=0.001593 Jy/beam ! Clean residual mean=-0.000026 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.180342 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 257 components and 0.180342 Jy ![Exited script file: muppet] wmap "J0819-0630_S_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.91 x 7.453 at -4.095 degrees (North through East) ! Clean map min=-0.0025736 max=0.12268 Jy/beam ! Writing clean map to FITS file: J0819-0630_S_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.122682 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000394716 device "J0819-0630_S_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J0819-0630_S_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.965215 0.965215 1.93043 3.86086 7.72172 15.4434 30.8869 61.7738 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.122 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.91 x 7.453 at -4.095 degrees (North through East) ! Clean map min=-0.0025736 max=0.12268 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0819-0630_S_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J0819-0630_S_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0819-0630_S_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:25:44 2008