! Started logfile: J0632-1250_S_2006_12_18_yyk_uvs.log on Mon Jun 16 19:20:59 2008
obs J0632-1250_S_2006_12_18_yyk_uve.fits
! Reading UV FITS file: J0632-1250_S_2006_12_18_yyk_uve.fits
! AN table 1: 17 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.820915 visibilities/baseline/integration-bin.
! Found source: J0632-1250
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2469 lines of history.
! 
! Reading 2512 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0632-1250_S_2006_12_18_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.112068 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.682 mas, bmaj=7.677 mas, bpa=-10.37 degrees
! Estimated noise=1.60157 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0569184 Jy
! Component: 100  -  total flux cleaned = 0.0798702 Jy
! Total flux subtracted in 100 components = 0.0798702 Jy
! Clean residual min=-0.014869 max=0.016610 Jy/beam
! Clean residual mean=-0.000054 rms=0.003559 Jy/beam
! Combined flux in latest and established models = 0.0798702 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0798702 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.080497Jy  sigma=1.261815
! Fit after  self-cal, rms=0.075139Jy  sigma=1.183189
! Inverting map and beam 
! Estimated beam: bmin=2.682 mas, bmaj=7.677 mas, bpa=-10.37 degrees
! Estimated noise=1.60157 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233438 Jy
! Component: 100  -  total flux cleaned = 0.024482 Jy
! Total flux subtracted in 100 components = 0.024482 Jy
! Clean residual min=-0.008234 max=0.010910 Jy/beam
! Clean residual mean=-0.000086 rms=0.002222 Jy/beam
! Combined flux in latest and established models = 0.104352 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 0.104352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070277Jy  sigma=1.092267
! Fit after  self-cal, rms=0.070040Jy  sigma=1.088696
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.849 mas, bmaj=11.25 mas, bpa=-11.89 degrees
! Estimated noise=0.97039 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000421364 Jy
! Component: 100  -  total flux cleaned = -0.000651783 Jy
! Component: 150  -  total flux cleaned = -0.000858015 Jy
! Component: 200  -  total flux cleaned = -0.00113299 Jy
! Total flux subtracted in 200 components = -0.00113299 Jy
! Clean residual min=-0.005358 max=0.010263 Jy/beam
! Clean residual mean=-0.000125 rms=0.002112 Jy/beam
! Combined flux in latest and established models = 0.103219 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 45 components and 0.103219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069831Jy  sigma=1.084512
! Fit after  self-cal, rms=0.069820Jy  sigma=1.084440
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.849 x 11.25 at -11.89 degrees (North through East)
! Clean map  min=-0.0052498  max=0.08284 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.02986
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        0.96     HN        1.00*    KP        0.90     
!   LA        0.99     MK        1.00*    NL        0.98     OV        1.07     
!   PT        0.94     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.069820Jy  sigma=1.084440
! Fit after  self-cal, rms=0.069077Jy  sigma=1.082880
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069077Jy  sigma=1.082880
! Fit after  self-cal, rms=0.069077Jy  sigma=1.082872
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.857 mas, bmaj=11.23 mas, bpa=-11.89 degrees
! Estimated noise=0.968889 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000368211 Jy
! Component: 100  -  total flux cleaned = -0.000584412 Jy
! Component: 150  -  total flux cleaned = -0.00071707 Jy
! Component: 200  -  total flux cleaned = -0.000900266 Jy
! Total flux subtracted in 200 components = -0.000900266 Jy
! Clean residual min=-0.004977 max=0.010065 Jy/beam
! Clean residual mean=-0.000118 rms=0.002038 Jy/beam
! Combined flux in latest and established models = 0.102319 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.102319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069015Jy  sigma=1.081101
! Fit after  self-cal, rms=0.069008Jy  sigma=1.081061
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069008Jy  sigma=1.081061
! Fit after  self-cal, rms=0.064478Jy  sigma=1.017020
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15, -1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111526 Jy
! Component: 100  -  total flux cleaned = 0.0144574 Jy
! Component: 150  -  total flux cleaned = 0.0161701 Jy
! Component: 200  -  total flux cleaned = 0.016035 Jy
! Total flux subtracted in 200 components = 0.016035 Jy
! Clean residual min=-0.004260 max=0.003980 Jy/beam
! Clean residual mean=-0.000150 rms=0.001338 Jy/beam
! Combined flux in latest and established models = 0.118354 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 65 components and 0.118354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062831Jy  sigma=0.987469
! Fit after  self-cal, rms=0.062374Jy  sigma=0.980549
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.857 x 11.23 at -11.89 degrees (North through East)
! Clean map  min=-0.0046644  max=0.087543 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.113 mas, bmaj=17.42 mas, bpa=-2.749 degrees
! Estimated noise=1.12884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00343643 Jy
! Component: 100  -  total flux cleaned = 0.00345866 Jy
! Component: 150  -  total flux cleaned = 0.00307037 Jy
! Component: 200  -  total flux cleaned = 0.00274469 Jy
! Total flux subtracted in 200 components = 0.00274469 Jy
! Clean residual min=-0.003713 max=0.004132 Jy/beam
! Clean residual mean=-0.000236 rms=0.001425 Jy/beam
! Combined flux in latest and established models = 0.121099 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 93 components and 0.121099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062147Jy  sigma=0.976949
! Fit after  self-cal, rms=0.062083Jy  sigma=0.975923
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.683 mas, bmaj=7.676 mas, bpa=-10.37 degrees
! Estimated noise=1.59997 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0713602 Jy
! Component: 100  -  total flux cleaned = 0.0914637 Jy
! Component: 150  -  total flux cleaned = 0.100836 Jy
! Component: 200  -  total flux cleaned = 0.105344 Jy
! Total flux subtracted in 200 components = 0.105344 Jy
! Clean residual min=-0.006483 max=0.007675 Jy/beam
! Clean residual mean=-0.000081 rms=0.001904 Jy/beam
! Combined flux in latest and established models = 0.105344 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.105344 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.857 mas, bmaj=11.23 mas, bpa=-11.89 degrees
! Estimated noise=0.968889 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00940129 Jy
! Component: 100  -  total flux cleaned = 0.0146625 Jy
! Component: 150  -  total flux cleaned = 0.0156062 Jy
! Component: 200  -  total flux cleaned = 0.015603 Jy
! Total flux subtracted in 200 components = 0.015603 Jy
! Clean residual min=-0.004211 max=0.003856 Jy/beam
! Clean residual mean=-0.000152 rms=0.001262 Jy/beam
! Combined flux in latest and established models = 0.120946 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 53 components and 0.120946 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.113 mas, bmaj=17.42 mas, bpa=-2.749 degrees
! Estimated noise=1.12884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194849 Jy
! Component: 100  -  total flux cleaned = 0.00172302 Jy
! Component: 150  -  total flux cleaned = 0.00142749 Jy
! Component: 200  -  total flux cleaned = 0.00115485 Jy
! Total flux subtracted in 200 components = 0.00115485 Jy
! Clean residual min=-0.003837 max=0.004298 Jy/beam
! Clean residual mean=-0.000241 rms=0.001450 Jy/beam
! Combined flux in latest and established models = 0.122101 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 78 components and 0.122101 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.857 mas, bmaj=11.23 mas, bpa=-11.89 degrees
! Estimated noise=0.968889 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108923 Jy
! Component: 100  -  total flux cleaned = -0.00118287 Jy
! Component: 150  -  total flux cleaned = -0.00134899 Jy
! Component: 200  -  total flux cleaned = -0.00149766 Jy
! Total flux subtracted in 200 components = -0.00149766 Jy
! Clean residual min=-0.003836 max=0.003732 Jy/beam
! Clean residual mean=-0.000138 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 0.120604 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 97 components and 0.120604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061837Jy  sigma=0.972315
! Fit after  self-cal, rms=0.061811Jy  sigma=0.971777
wmodel J0632-1250_S_2006_12_18_yyk\_map.mod
! Writing 97 model components to file: J0632-1250_S_2006_12_18_yyk_map.mod
wobs J0632-1250_S_2006_12_18_yyk\_uvs.fits
! Writing UV FITS file: J0632-1250_S_2006_12_18_yyk_uvs.fits
wwins J0632-1250_S_2006_12_18_yyk\_map.win
! wwins: Wrote 2 windows to J0632-1250_S_2006_12_18_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0002158 Jy
! Component: 100  -  total flux cleaned = -0.000279201 Jy
! Component: 150  -  total flux cleaned = -0.000399564 Jy
! Component: 200  -  total flux cleaned = -0.000679601 Jy
! Component: 250  -  total flux cleaned = -0.000894782 Jy
! Component: 300  -  total flux cleaned = -0.00104907 Jy
! Component: 350  -  total flux cleaned = -0.0012482 Jy
! Component: 400  -  total flux cleaned = -0.00129633 Jy
! Component: 450  -  total flux cleaned = -0.00143755 Jy
! Component: 500  -  total flux cleaned = -0.00162046 Jy
! Component: 550  -  total flux cleaned = -0.00166591 Jy
! Component: 600  -  total flux cleaned = -0.00192772 Jy
! Component: 650  -  total flux cleaned = -0.00209785 Jy
! Component: 700  -  total flux cleaned = -0.00222266 Jy
! Component: 750  -  total flux cleaned = -0.00250568 Jy
! Component: 800  -  total flux cleaned = -0.00262462 Jy
! Component: 850  -  total flux cleaned = -0.00285635 Jy
! Component: 900  -  total flux cleaned = -0.0029333 Jy
! Component: 950  -  total flux cleaned = -0.00326783 Jy
! Component: 1000  -  total flux cleaned = -0.003486 Jy
! Component: 1050  -  total flux cleaned = -0.00380734 Jy
! Component: 1100  -  total flux cleaned = -0.0040176 Jy
! Component: 1150  -  total flux cleaned = -0.00436229 Jy
! Component: 1200  -  total flux cleaned = -0.00470162 Jy
! Component: 1250  -  total flux cleaned = -0.00506919 Jy
! Component: 1300  -  total flux cleaned = -0.00539864 Jy
! Component: 1350  -  total flux cleaned = -0.00585201 Jy
! Component: 1400  -  total flux cleaned = -0.00620327 Jy
! Component: 1450  -  total flux cleaned = -0.00654984 Jy
! Component: 1500  -  total flux cleaned = -0.00689205 Jy
! Component: 1550  -  total flux cleaned = -0.00732113 Jy
! Component: 1600  -  total flux cleaned = -0.00762251 Jy
! Component: 1650  -  total flux cleaned = -0.00780171 Jy
! Component: 1700  -  total flux cleaned = -0.00815583 Jy
! Component: 1750  -  total flux cleaned = -0.00847602 Jy
! Component: 1800  -  total flux cleaned = -0.00879242 Jy
! Component: 1850  -  total flux cleaned = -0.00910507 Jy
! Component: 1900  -  total flux cleaned = -0.00935815 Jy
! Component: 1950  -  total flux cleaned = -0.00966351 Jy
! Component: 2000  -  total flux cleaned = -0.00996547 Jy
! Total flux subtracted in 2048 components = -0.0101557 Jy
! Clean residual min=-0.001403 max=0.001816 Jy/beam
! Clean residual mean=-0.000066 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.110448 Jy
keep
! Adding 120 model components to the UV plane model.
! The established model now contains 217 components and 0.110448 Jy
![Exited script file: muppet]
wmap "J0632-1250_S_2006_12_18_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.857 x 11.23 at -11.89 degrees (North through East)
! Clean map  min=-0.0057163  max=0.087412 Jy/beam
! Writing clean map to FITS file: J0632-1250_S_2006_12_18_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0874123 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000565694 
device "J0632-1250_S_2006_12_18_yyk\_map.eps/VPS"
! Attempting to open device: 'J0632-1250_S_2006_12_18_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.94147 1.94147 3.88294 7.76587 15.5317 31.0635 62.127
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.087 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.857 x 11.23 at -11.89 degrees (North through East)
! Clean map  min=-0.0057163  max=0.087412 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0632-1250_S_2006_12_18_yyk\_map.gif/gif"
! Attempting to open device: 'J0632-1250_S_2006_12_18_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0632-1250_S_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:21:05 2008