! Started logfile: J0524-2818_X_2007_01_11_yyk_uvs.log on Mon Jun 16 19:17:22 2008 obs J0524-2818_X_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J0524-2818_X_2007_01_11_yyk_uve.fits ! AN table 1: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0524-2818 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2143 lines of history. ! ! Reading 1260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0524-2818_X_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.181172 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5658 mas, bmaj=1.587 mas, bpa=7.222 degrees ! Estimated noise=2.11575 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.128565 Jy ! Component: 100 - total flux cleaned = 0.159932 Jy ! Total flux subtracted in 100 components = 0.159932 Jy ! Clean residual min=-0.009431 max=0.011094 Jy/beam ! Clean residual mean=-0.000020 rms=0.002652 Jy/beam ! Combined flux in latest and established models = 0.159932 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.159932 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.080211Jy sigma=1.136856 ! Fit after self-cal, rms=0.079941Jy sigma=1.132118 ! Inverting map and beam ! Estimated beam: bmin=0.5658 mas, bmaj=1.587 mas, bpa=7.222 degrees ! Estimated noise=2.11575 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7775 mas, bmaj=1.996 mas, bpa=4.963 degrees ! Estimated noise=1.17111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190803 Jy ! Component: 100 - total flux cleaned = 0.0250519 Jy ! Component: 150 - total flux cleaned = 0.0271966 Jy ! Component: 200 - total flux cleaned = 0.0279152 Jy ! Total flux subtracted in 200 components = 0.0279152 Jy ! Clean residual min=-0.005028 max=0.005862 Jy/beam ! Clean residual mean=0.000008 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.187847 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.187847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077088Jy sigma=1.073008 ! Fit after self-cal, rms=0.077052Jy sigma=1.072746 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7775 x 1.996 at 4.963 degrees (North through East) ! Clean map min=-0.0046438 max=0.16048 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01648 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.00* KP 1.00* ! LA 0.98 MK 0.97 OV 0.93 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00776 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.00* KP 1.00* ! LA 0.95 MK 0.99 OV 0.94 PT 1.06 ! SC 1.08 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.997841 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.00* KP 1.00* ! LA 0.98 MK 1.01 OV 1.01 PT 1.06 ! SC 0.92 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.971076 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.07 HN 1.00* KP 1.00* ! LA 0.96 MK 1.06 OV 0.98 PT 1.13 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.077052Jy sigma=1.072746 ! Fit after self-cal, rms=0.076245Jy sigma=1.055442 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076245Jy sigma=1.055442 ! Fit after self-cal, rms=0.076249Jy sigma=1.055416 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7787 mas, bmaj=1.995 mas, bpa=5.175 degrees ! Estimated noise=1.16917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.82464e-05 Jy ! Component: 100 - total flux cleaned = 5.99841e-05 Jy ! Component: 150 - total flux cleaned = 7.77828e-05 Jy ! Component: 200 - total flux cleaned = 9.22159e-05 Jy ! Total flux subtracted in 200 components = 9.22159e-05 Jy ! Clean residual min=-0.003360 max=0.002841 Jy/beam ! Clean residual mean=0.000000 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.187939 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.187939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076255Jy sigma=1.055248 ! Fit after self-cal, rms=0.076239Jy sigma=1.055223 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076239Jy sigma=1.055223 ! Fit after self-cal, rms=0.067180Jy sigma=0.918672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020327 Jy ! Component: 100 - total flux cleaned = 0.00208182 Jy ! Component: 150 - total flux cleaned = 0.00212097 Jy ! Component: 200 - total flux cleaned = 0.00210073 Jy ! Total flux subtracted in 200 components = 0.00210073 Jy ! Clean residual min=-0.003158 max=0.003102 Jy/beam ! Clean residual mean=-0.000001 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.19004 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.19004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066977Jy sigma=0.916939 ! Fit after self-cal, rms=0.066399Jy sigma=0.909441 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7787 x 1.995 at 5.175 degrees (North through East) ! Clean map min=-0.0028596 max=0.16373 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066399Jy sigma=0.909441 ! Fit after self-cal, rms=0.066059Jy sigma=0.900955 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066059Jy sigma=0.900955 ! Fit after self-cal, rms=0.066029Jy sigma=0.900286 ! Inverting map and beam ! Estimated beam: bmin=0.777 mas, bmaj=1.992 mas, bpa=5.304 degrees ! Estimated noise=1.16552 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209011 Jy ! Component: 100 - total flux cleaned = 0.000208205 Jy ! Component: 150 - total flux cleaned = 0.000208375 Jy ! Component: 200 - total flux cleaned = 0.000208416 Jy ! Total flux subtracted in 200 components = 0.000208416 Jy ! Clean residual min=-0.002808 max=0.002634 Jy/beam ! Clean residual mean=-0.000005 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.190249 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.190249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066019Jy sigma=0.900171 ! Fit after self-cal, rms=0.066021Jy sigma=0.900087 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066021Jy sigma=0.900087 ! Fit after self-cal, rms=0.063793Jy sigma=0.880340 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063793Jy sigma=0.880340 ! Fit after self-cal, rms=0.063800Jy sigma=0.880225 ! Inverting map and beam ! Estimated beam: bmin=0.7793 mas, bmaj=1.995 mas, bpa=5.114 degrees ! Estimated noise=1.16816 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329307 Jy ! Component: 100 - total flux cleaned = 0.000333132 Jy ! Component: 150 - total flux cleaned = 0.000317178 Jy ! Component: 200 - total flux cleaned = 0.000316495 Jy ! Total flux subtracted in 200 components = 0.000316495 Jy ! Clean residual min=-0.003124 max=0.003115 Jy/beam ! Clean residual mean=-0.000008 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.190565 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.190565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063768Jy sigma=0.880031 ! Fit after self-cal, rms=0.063769Jy sigma=0.880019 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.454 mas, bmaj=7.436 mas, bpa=16.85 degrees ! Estimated noise=1.56589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362156 Jy ! Component: 100 - total flux cleaned = 0.00036105 Jy ! Component: 150 - total flux cleaned = 0.000360157 Jy ! Component: 200 - total flux cleaned = 0.000359578 Jy ! Total flux subtracted in 200 components = 0.000359578 Jy ! Clean residual min=-0.002684 max=0.004127 Jy/beam ! Clean residual mean=-0.000016 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.190925 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 42 components and 0.190925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063769Jy sigma=0.880131 ! Fit after self-cal, rms=0.063769Jy sigma=0.880070 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5667 mas, bmaj=1.589 mas, bpa=7.516 degrees ! Estimated noise=2.12805 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.13319 Jy ! Component: 100 - total flux cleaned = 0.164197 Jy ! Component: 150 - total flux cleaned = 0.178316 Jy ! Component: 200 - total flux cleaned = 0.185536 Jy ! Total flux subtracted in 200 components = 0.185536 Jy ! Clean residual min=-0.005438 max=0.006032 Jy/beam ! Clean residual mean=-0.000006 rms=0.001549 Jy/beam ! Combined flux in latest and established models = 0.185536 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.185536 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7793 mas, bmaj=1.995 mas, bpa=5.114 degrees ! Estimated noise=1.16816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419045 Jy ! Component: 100 - total flux cleaned = 0.00481273 Jy ! Component: 150 - total flux cleaned = 0.00496827 Jy ! Component: 200 - total flux cleaned = 0.00499788 Jy ! Total flux subtracted in 200 components = 0.00499788 Jy ! Clean residual min=-0.003043 max=0.003155 Jy/beam ! Clean residual mean=-0.000008 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.190534 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.190534 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.454 mas, bmaj=7.436 mas, bpa=16.85 degrees ! Estimated noise=1.56589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433743 Jy ! Component: 100 - total flux cleaned = 0.000435503 Jy ! Component: 150 - total flux cleaned = 0.000436738 Jy ! Component: 200 - total flux cleaned = 0.000446849 Jy ! Total flux subtracted in 200 components = 0.000446849 Jy ! Clean residual min=-0.002716 max=0.004195 Jy/beam ! Clean residual mean=-0.000015 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.190981 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 30 components and 0.190981 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7793 mas, bmaj=1.995 mas, bpa=5.114 degrees ! Estimated noise=1.16816 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163744 Jy ! Component: 100 - total flux cleaned = -0.000109587 Jy ! Component: 150 - total flux cleaned = -0.000110029 Jy ! Component: 200 - total flux cleaned = -0.000128492 Jy ! Total flux subtracted in 200 components = -0.000128492 Jy ! Clean residual min=-0.003114 max=0.003149 Jy/beam ! Clean residual mean=-0.000007 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.190853 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.190853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063803Jy sigma=0.880259 ! Fit after self-cal, rms=0.063799Jy sigma=0.880228 wmodel J0524-2818_X_2007_01_11_yyk\_map.mod ! Writing 33 model components to file: J0524-2818_X_2007_01_11_yyk_map.mod wobs J0524-2818_X_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J0524-2818_X_2007_01_11_yyk_uvs.fits wwins J0524-2818_X_2007_01_11_yyk\_map.win ! wwins: Wrote 1 windows to J0524-2818_X_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000518209 Jy ! Component: 100 - total flux cleaned = 0.0006671 Jy ! Component: 150 - total flux cleaned = 0.000902093 Jy ! Component: 200 - total flux cleaned = 0.00129869 Jy ! Component: 250 - total flux cleaned = 0.00166798 Jy ! Component: 300 - total flux cleaned = 0.001864 Jy ! Component: 350 - total flux cleaned = 0.00190148 Jy ! Component: 400 - total flux cleaned = 0.00183039 Jy ! Component: 450 - total flux cleaned = 0.00179572 Jy ! Component: 500 - total flux cleaned = 0.00179557 Jy ! Component: 550 - total flux cleaned = 0.00182714 Jy ! Component: 600 - total flux cleaned = 0.00176397 Jy ! Component: 650 - total flux cleaned = 0.00179452 Jy ! Component: 700 - total flux cleaned = 0.00176421 Jy ! Component: 750 - total flux cleaned = 0.00176395 Jy ! Component: 800 - total flux cleaned = 0.00179197 Jy ! Component: 850 - total flux cleaned = 0.00176358 Jy ! Component: 900 - total flux cleaned = 0.00187362 Jy ! Component: 950 - total flux cleaned = 0.00187371 Jy ! Component: 1000 - total flux cleaned = 0.00211457 Jy ! Component: 1050 - total flux cleaned = 0.00227252 Jy ! Component: 1100 - total flux cleaned = 0.00242808 Jy ! Component: 1150 - total flux cleaned = 0.00255562 Jy ! Component: 1200 - total flux cleaned = 0.00263165 Jy ! Component: 1250 - total flux cleaned = 0.00268177 Jy ! Component: 1300 - total flux cleaned = 0.00278012 Jy ! Component: 1350 - total flux cleaned = 0.0029019 Jy ! Component: 1400 - total flux cleaned = 0.00304613 Jy ! Component: 1450 - total flux cleaned = 0.00316502 Jy ! Component: 1500 - total flux cleaned = 0.003259 Jy ! Component: 1550 - total flux cleaned = 0.00332901 Jy ! Component: 1600 - total flux cleaned = 0.00346734 Jy ! Component: 1650 - total flux cleaned = 0.00358159 Jy ! Component: 1700 - total flux cleaned = 0.00376225 Jy ! Component: 1750 - total flux cleaned = 0.00385141 Jy ! Component: 1800 - total flux cleaned = 0.00396204 Jy ! Component: 1850 - total flux cleaned = 0.00411514 Jy ! Component: 1900 - total flux cleaned = 0.0041801 Jy ! Component: 1950 - total flux cleaned = 0.00426623 Jy ! Component: 2000 - total flux cleaned = 0.0043942 Jy ! Total flux subtracted in 2048 components = 0.0044999 Jy ! Clean residual min=-0.001127 max=0.001151 Jy/beam ! Clean residual mean=0.000000 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.195353 Jy keep ! Adding 109 model components to the UV plane model. ! The established model now contains 142 components and 0.195352 Jy ![Exited script file: muppet] wmap "J0524-2818_X_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7793 x 1.995 at 5.114 degrees (North through East) ! Clean map min=-0.0019325 max=0.16424 Jy/beam ! Writing clean map to FITS file: J0524-2818_X_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.164239 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000377294 device "J0524-2818_X_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J0524-2818_X_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.689167 0.689167 1.37833 2.75667 5.51334 11.0267 22.0534 44.1067 88.2134 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.164 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7793 x 1.995 at 5.114 degrees (North through East) ! Clean map min=-0.0019325 max=0.16424 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0524-2818_X_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J0524-2818_X_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0524-2818_X_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:17:28 2008