! Started logfile: J0513-2016_S_2006_12_18_yyk_uvs.log on Mon Jun 16 19:16:53 2008 obs J0513-2016_S_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J0513-2016_S_2006_12_18_yyk_uve.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.840278 visibilities/baseline/integration-bin. ! Found source: J0513-2016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2469 lines of history. ! ! Reading 2420 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0513-2016_S_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.13155 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=6.629 mas, bpa=-2.578 degrees ! Estimated noise=1.53021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0790053 Jy ! Component: 100 - total flux cleaned = 0.102839 Jy ! Total flux subtracted in 100 components = 0.102839 Jy ! Clean residual min=-0.008124 max=0.010911 Jy/beam ! Clean residual mean=-0.000060 rms=0.002412 Jy/beam ! Combined flux in latest and established models = 0.102839 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.102839 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.089262Jy sigma=1.144623 ! Fit after self-cal, rms=0.085284Jy sigma=1.120822 ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=6.63 mas, bpa=-2.577 degrees ! Estimated noise=1.53389 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=9.141 mas, bpa=-6.938 degrees ! Estimated noise=0.964486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189352 Jy ! Component: 100 - total flux cleaned = 0.0249607 Jy ! Component: 150 - total flux cleaned = 0.0265742 Jy ! Component: 200 - total flux cleaned = 0.0268301 Jy ! Total flux subtracted in 200 components = 0.0268301 Jy ! Clean residual min=-0.004821 max=0.006164 Jy/beam ! Clean residual mean=-0.000010 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.129669 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.129669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083415Jy sigma=1.068431 ! Fit after self-cal, rms=0.083373Jy sigma=1.068268 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.311 x 9.141 at -6.938 degrees (North through East) ! Clean map min=-0.004635 max=0.098791 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03332 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.85 KP 0.92 ! LA 1.13 MK 0.92 NL 0.98 OV 0.94 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.083373Jy sigma=1.068268 ! Fit after self-cal, rms=0.082840Jy sigma=1.064865 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082840Jy sigma=1.064865 ! Fit after self-cal, rms=0.082839Jy sigma=1.064715 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=9.099 mas, bpa=-7.101 degrees ! Estimated noise=0.963643 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131826 Jy ! Component: 100 - total flux cleaned = 0.0015667 Jy ! Component: 150 - total flux cleaned = 0.00172126 Jy ! Component: 200 - total flux cleaned = 0.00186741 Jy ! Total flux subtracted in 200 components = 0.00186741 Jy ! Clean residual min=-0.004174 max=0.005793 Jy/beam ! Clean residual mean=0.000036 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.131537 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.131537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082693Jy sigma=1.062656 ! Fit after self-cal, rms=0.082674Jy sigma=1.062499 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082674Jy sigma=1.062499 ! Fit after self-cal, rms=0.074702Jy sigma=0.965373 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368713 Jy ! Component: 100 - total flux cleaned = 0.00386616 Jy ! Component: 150 - total flux cleaned = 0.00387029 Jy ! Component: 200 - total flux cleaned = 0.00391369 Jy ! Total flux subtracted in 200 components = 0.00391369 Jy ! Clean residual min=-0.004060 max=0.005714 Jy/beam ! Clean residual mean=0.000030 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.13545 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.13545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074564Jy sigma=0.962722 ! Fit after self-cal, rms=0.073862Jy sigma=0.955778 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.278 x 9.099 at -7.101 degrees (North through East) ! Clean map min=-0.0040433 max=0.10192 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073862Jy sigma=0.955778 ! Fit after self-cal, rms=0.073327Jy sigma=0.952797 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073327Jy sigma=0.952797 ! Fit after self-cal, rms=0.073212Jy sigma=0.952003 ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=9.03 mas, bpa=-6.916 degrees ! Estimated noise=0.952095 mJy/beam. ! Added new window around map position (-9, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637268 Jy ! Component: 100 - total flux cleaned = 0.00963184 Jy ! Component: 150 - total flux cleaned = 0.0110851 Jy ! Component: 200 - total flux cleaned = 0.0117458 Jy ! Total flux subtracted in 200 components = 0.0117458 Jy ! Clean residual min=-0.003290 max=0.003813 Jy/beam ! Clean residual mean=-0.000027 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.147196 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.147196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072778Jy sigma=0.943965 ! Fit after self-cal, rms=0.072722Jy sigma=0.943071 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072722Jy sigma=0.943071 ! Fit after self-cal, rms=0.071974Jy sigma=0.942235 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071974Jy sigma=0.942235 ! Fit after self-cal, rms=0.071974Jy sigma=0.942081 ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=9.101 mas, bpa=-7.032 degrees ! Estimated noise=0.935496 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000724227 Jy ! Component: 100 - total flux cleaned = -0.000642866 Jy ! Component: 150 - total flux cleaned = -0.000700914 Jy ! Component: 200 - total flux cleaned = -0.000659895 Jy ! Total flux subtracted in 200 components = -0.000659895 Jy ! Clean residual min=-0.003213 max=0.003408 Jy/beam ! Clean residual mean=-0.000035 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.146536 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 99 components and 0.146536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071838Jy sigma=0.940203 ! Fit after self-cal, rms=0.071829Jy sigma=0.940048 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.864 mas, bmaj=19.1 mas, bpa=1.714 degrees ! Estimated noise=1.16114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107187 Jy ! Component: 100 - total flux cleaned = 0.00139216 Jy ! Component: 150 - total flux cleaned = 0.00159874 Jy ! Component: 200 - total flux cleaned = 0.00167588 Jy ! Total flux subtracted in 200 components = 0.00167588 Jy ! Clean residual min=-0.002596 max=0.002263 Jy/beam ! Clean residual mean=-0.000075 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.148212 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 111 components and 0.148212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071826Jy sigma=0.939907 ! Fit after self-cal, rms=0.071825Jy sigma=0.939861 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.653 mas, bpa=-2.756 degrees ! Estimated noise=1.47044 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0816481 Jy ! Component: 100 - total flux cleaned = 0.1053 Jy ! Component: 150 - total flux cleaned = 0.117001 Jy ! Component: 200 - total flux cleaned = 0.124401 Jy ! Total flux subtracted in 200 components = 0.124401 Jy ! Clean residual min=-0.007182 max=0.006784 Jy/beam ! Clean residual mean=-0.000052 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.124401 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.124401 Jy ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=9.101 mas, bpa=-7.032 degrees ! Estimated noise=0.935496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00846222 Jy ! Component: 100 - total flux cleaned = 0.0133346 Jy ! Component: 150 - total flux cleaned = 0.0167244 Jy ! Component: 200 - total flux cleaned = 0.01912 Jy ! Total flux subtracted in 200 components = 0.01912 Jy ! Clean residual min=-0.003240 max=0.003203 Jy/beam ! Clean residual mean=-0.000019 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.143521 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 81 components and 0.143521 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.864 mas, bmaj=19.1 mas, bpa=1.714 degrees ! Estimated noise=1.16114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258686 Jy ! Component: 100 - total flux cleaned = 0.00407026 Jy ! Component: 150 - total flux cleaned = 0.00495297 Jy ! Component: 200 - total flux cleaned = 0.00517535 Jy ! Total flux subtracted in 200 components = 0.00517535 Jy ! Clean residual min=-0.002507 max=0.002333 Jy/beam ! Clean residual mean=-0.000073 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.148696 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.148696 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=9.101 mas, bpa=-7.032 degrees ! Estimated noise=0.935496 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000981436 Jy ! Component: 100 - total flux cleaned = -0.00112165 Jy ! Component: 150 - total flux cleaned = -0.00116117 Jy ! Component: 200 - total flux cleaned = -0.00116069 Jy ! Total flux subtracted in 200 components = -0.00116069 Jy ! Clean residual min=-0.003104 max=0.003190 Jy/beam ! Clean residual mean=-0.000036 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.147535 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 117 components and 0.147535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071741Jy sigma=0.939114 ! Fit after self-cal, rms=0.071719Jy sigma=0.938918 wmodel J0513-2016_S_2006_12_18_yyk\_map.mod ! Writing 117 model components to file: J0513-2016_S_2006_12_18_yyk_map.mod wobs J0513-2016_S_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J0513-2016_S_2006_12_18_yyk_uvs.fits wwins J0513-2016_S_2006_12_18_yyk\_map.win ! wwins: Wrote 2 windows to J0513-2016_S_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223049 Jy ! Component: 100 - total flux cleaned = -0.000328632 Jy ! Component: 150 - total flux cleaned = -0.000381026 Jy ! Component: 200 - total flux cleaned = -0.000473693 Jy ! Component: 250 - total flux cleaned = -0.000562107 Jy ! Component: 300 - total flux cleaned = -0.000821734 Jy ! Component: 350 - total flux cleaned = -0.000989568 Jy ! Component: 400 - total flux cleaned = -0.00111205 Jy ! Component: 450 - total flux cleaned = -0.00134992 Jy ! Component: 500 - total flux cleaned = -0.00146566 Jy ! Component: 550 - total flux cleaned = -0.00157939 Jy ! Component: 600 - total flux cleaned = -0.00176399 Jy ! Component: 650 - total flux cleaned = -0.00201644 Jy ! Component: 700 - total flux cleaned = -0.00226359 Jy ! Component: 750 - total flux cleaned = -0.00236746 Jy ! Component: 800 - total flux cleaned = -0.00257157 Jy ! Component: 850 - total flux cleaned = -0.00267152 Jy ! Component: 900 - total flux cleaned = -0.00277026 Jy ! Component: 950 - total flux cleaned = -0.00289897 Jy ! Component: 1000 - total flux cleaned = -0.00311919 Jy ! Component: 1050 - total flux cleaned = -0.0032433 Jy ! Component: 1100 - total flux cleaned = -0.00339564 Jy ! Component: 1150 - total flux cleaned = -0.00354673 Jy ! Component: 1200 - total flux cleaned = -0.00375481 Jy ! Component: 1250 - total flux cleaned = -0.00390072 Jy ! Component: 1300 - total flux cleaned = -0.00392959 Jy ! Component: 1350 - total flux cleaned = -0.00407269 Jy ! Component: 1400 - total flux cleaned = -0.00418565 Jy ! Component: 1450 - total flux cleaned = -0.00421323 Jy ! Component: 1500 - total flux cleaned = -0.00424055 Jy ! Component: 1550 - total flux cleaned = -0.00429476 Jy ! Component: 1600 - total flux cleaned = -0.00426784 Jy ! Component: 1650 - total flux cleaned = -0.00426766 Jy ! Component: 1700 - total flux cleaned = -0.00426798 Jy ! Component: 1750 - total flux cleaned = -0.00437188 Jy ! Component: 1800 - total flux cleaned = -0.00449997 Jy ! Component: 1850 - total flux cleaned = -0.00449993 Jy ! Component: 1900 - total flux cleaned = -0.00452553 Jy ! Component: 1950 - total flux cleaned = -0.00457559 Jy ! Component: 2000 - total flux cleaned = -0.00472301 Jy ! Total flux subtracted in 2048 components = -0.00472314 Jy ! Clean residual min=-0.001579 max=0.001228 Jy/beam ! Clean residual mean=-0.000017 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.142812 Jy keep ! Adding 114 model components to the UV plane model. ! The established model now contains 231 components and 0.142812 Jy ![Exited script file: muppet] wmap "J0513-2016_S_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 9.101 at -7.032 degrees (North through East) ! Clean map min=-0.0025167 max=0.099181 Jy/beam ! Writing clean map to FITS file: J0513-2016_S_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0991812 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000483049 device "J0513-2016_S_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J0513-2016_S_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.46111 1.46111 2.92222 5.84445 11.6889 23.3778 46.7556 93.5112 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 9.101 at -7.032 degrees (North through East) ! Clean map min=-0.0025167 max=0.099181 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0513-2016_S_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J0513-2016_S_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0513-2016_S_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:16:59 2008