! Started logfile: J0506-0950_S_2006_12_18_yyk_uvs.log on Mon Jun 16 19:16:29 2008 obs J0506-0950_S_2006_12_18_yyk_uve.fits ! Reading UV FITS file: J0506-0950_S_2006_12_18_yyk_uve.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.974815 visibilities/baseline/integration-bin. ! Found source: J0506-0950 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2469 lines of history. ! ! Reading 2632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0506-0950_S_2006_12_18_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.130863 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.524 mas, bmaj=6.674 mas, bpa=-1.618 degrees ! Estimated noise=1.22401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0866965 Jy ! Component: 100 - total flux cleaned = 0.102541 Jy ! Total flux subtracted in 100 components = 0.102541 Jy ! Clean residual min=-0.006161 max=0.006275 Jy/beam ! Clean residual mean=-0.000032 rms=0.001772 Jy/beam ! Combined flux in latest and established models = 0.102541 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.102541 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.083124Jy sigma=1.103787 ! Fit after self-cal, rms=0.076531Jy sigma=1.057593 ! Inverting map and beam ! Estimated beam: bmin=2.524 mas, bmaj=6.674 mas, bpa=-1.618 degrees ! Estimated noise=1.22389 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=8.5 mas, bpa=-3.238 degrees ! Estimated noise=0.838834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129397 Jy ! Component: 100 - total flux cleaned = 0.0168469 Jy ! Component: 150 - total flux cleaned = 0.0178226 Jy ! Component: 200 - total flux cleaned = 0.0178648 Jy ! Total flux subtracted in 200 components = 0.0178648 Jy ! Clean residual min=-0.003699 max=0.003751 Jy/beam ! Clean residual mean=-0.000074 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.120406 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.120406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075689Jy sigma=1.028734 ! Fit after self-cal, rms=0.075685Jy sigma=1.028622 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.381 x 8.5 at -3.238 degrees (North through East) ! Clean map min=-0.0034226 max=0.10919 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0275 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 0.93 KP 0.94 ! LA 1.14 MK 1.01 NL 0.96 OV 0.99 ! PT 1.02 SC 0.88 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.990466 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.96 KP 0.95 ! LA 1.03 MK 1.05 NL 1.16 OV 1.01 ! PT 0.98 SC 0.93 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.075685Jy sigma=1.028622 ! Fit after self-cal, rms=0.075247Jy sigma=1.022400 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075247Jy sigma=1.022400 ! Fit after self-cal, rms=0.075249Jy sigma=1.022386 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.34 mas, bpa=-1.877 degrees ! Estimated noise=0.8402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172938 Jy ! Component: 100 - total flux cleaned = 0.00188119 Jy ! Component: 150 - total flux cleaned = 0.00200568 Jy ! Component: 200 - total flux cleaned = 0.0021132 Jy ! Total flux subtracted in 200 components = 0.0021132 Jy ! Clean residual min=-0.003483 max=0.003196 Jy/beam ! Clean residual mean=-0.000034 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.122519 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.122519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075160Jy sigma=1.021033 ! Fit after self-cal, rms=0.075158Jy sigma=1.020953 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075158Jy sigma=1.020953 ! Fit after self-cal, rms=0.069343Jy sigma=0.958439 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167161 Jy ! Component: 100 - total flux cleaned = 0.00192934 Jy ! Component: 150 - total flux cleaned = 0.00197344 Jy ! Component: 200 - total flux cleaned = 0.00197307 Jy ! Total flux subtracted in 200 components = 0.00197307 Jy ! Clean residual min=-0.003134 max=0.003252 Jy/beam ! Clean residual mean=-0.000024 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.124492 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.124492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069333Jy sigma=0.957827 ! Fit after self-cal, rms=0.068663Jy sigma=0.954175 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.34 at -1.877 degrees (North through East) ! Clean map min=-0.0030999 max=0.11091 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068663Jy sigma=0.954175 ! Fit after self-cal, rms=0.068016Jy sigma=0.946171 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068016Jy sigma=0.946171 ! Fit after self-cal, rms=0.067841Jy sigma=0.945553 ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=8.301 mas, bpa=-1.418 degrees ! Estimated noise=0.831072 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000338119 Jy ! Component: 100 - total flux cleaned = -0.000394302 Jy ! Component: 150 - total flux cleaned = -0.000409085 Jy ! Component: 200 - total flux cleaned = -0.000448801 Jy ! Total flux subtracted in 200 components = -0.000448801 Jy ! Clean residual min=-0.003352 max=0.003171 Jy/beam ! Clean residual mean=-0.000019 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.124043 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.124043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067817Jy sigma=0.945386 ! Fit after self-cal, rms=0.067751Jy sigma=0.945239 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067751Jy sigma=0.945239 ! Fit after self-cal, rms=0.067389Jy sigma=0.946099 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067389Jy sigma=0.946099 ! Fit after self-cal, rms=0.067368Jy sigma=0.945971 ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=8.376 mas, bpa=-1.733 degrees ! Estimated noise=0.823228 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014858 Jy ! Component: 100 - total flux cleaned = -0.00163404 Jy ! Component: 150 - total flux cleaned = -0.00163173 Jy ! Component: 200 - total flux cleaned = -0.00161346 Jy ! Total flux subtracted in 200 components = -0.00161346 Jy ! Clean residual min=-0.003467 max=0.003222 Jy/beam ! Clean residual mean=-0.000029 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.12243 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.12243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067334Jy sigma=0.945445 ! Fit after self-cal, rms=0.067323Jy sigma=0.945426 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.895 mas, bmaj=14.92 mas, bpa=2.279 degrees ! Estimated noise=1.02304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.62947e-06 Jy ! Component: 100 - total flux cleaned = -4.43801e-05 Jy ! Component: 150 - total flux cleaned = -0.000102623 Jy ! Component: 200 - total flux cleaned = -0.000158838 Jy ! Total flux subtracted in 200 components = -0.000158838 Jy ! Clean residual min=-0.003315 max=0.003778 Jy/beam ! Clean residual mean=-0.000058 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.122271 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 76 components and 0.122271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067335Jy sigma=0.945600 ! Fit after self-cal, rms=0.067318Jy sigma=0.945459 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.519 mas, bmaj=6.633 mas, bpa=-0.718 degrees ! Estimated noise=1.18793 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0913275 Jy ! Component: 100 - total flux cleaned = 0.108593 Jy ! Component: 150 - total flux cleaned = 0.115629 Jy ! Component: 200 - total flux cleaned = 0.119256 Jy ! Total flux subtracted in 200 components = 0.119256 Jy ! Clean residual min=-0.004968 max=0.003565 Jy/beam ! Clean residual mean=0.000001 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.119256 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.119256 Jy ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=8.376 mas, bpa=-1.733 degrees ! Estimated noise=0.823228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243007 Jy ! Component: 100 - total flux cleaned = 0.00289333 Jy ! Component: 150 - total flux cleaned = 0.00292127 Jy ! Component: 200 - total flux cleaned = 0.00294742 Jy ! Total flux subtracted in 200 components = 0.00294742 Jy ! Clean residual min=-0.003506 max=0.003262 Jy/beam ! Clean residual mean=-0.000028 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.122203 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.122203 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.895 mas, bmaj=14.92 mas, bpa=2.279 degrees ! Estimated noise=1.02304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.85906e-05 Jy ! Component: 100 - total flux cleaned = -6.24998e-05 Jy ! Component: 150 - total flux cleaned = -3.8991e-05 Jy ! Component: 200 - total flux cleaned = -2.93965e-06 Jy ! Total flux subtracted in 200 components = -2.93965e-06 Jy ! Clean residual min=-0.003329 max=0.003759 Jy/beam ! Clean residual mean=-0.000057 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.1222 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.1222 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=8.376 mas, bpa=-1.733 degrees ! Estimated noise=0.823228 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139059 Jy ! Component: 100 - total flux cleaned = 0.000166452 Jy ! Component: 150 - total flux cleaned = 0.000187203 Jy ! Component: 200 - total flux cleaned = 0.000186955 Jy ! Total flux subtracted in 200 components = 0.000186955 Jy ! Clean residual min=-0.003467 max=0.003246 Jy/beam ! Clean residual mean=-0.000029 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.122387 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.122387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067311Jy sigma=0.945584 ! Fit after self-cal, rms=0.067303Jy sigma=0.945532 wmodel J0506-0950_S_2006_12_18_yyk\_map.mod ! Writing 50 model components to file: J0506-0950_S_2006_12_18_yyk_map.mod wobs J0506-0950_S_2006_12_18_yyk\_uvs.fits ! Writing UV FITS file: J0506-0950_S_2006_12_18_yyk_uvs.fits wwins J0506-0950_S_2006_12_18_yyk\_map.win ! wwins: Wrote 1 windows to J0506-0950_S_2006_12_18_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000207102 Jy ! Component: 100 - total flux cleaned = -0.000363508 Jy ! Component: 150 - total flux cleaned = -0.000509821 Jy ! Component: 200 - total flux cleaned = -0.000687395 Jy ! Component: 250 - total flux cleaned = -0.000857111 Jy ! Component: 300 - total flux cleaned = -0.000857675 Jy ! Component: 350 - total flux cleaned = -0.000858443 Jy ! Component: 400 - total flux cleaned = -0.000820635 Jy ! Component: 450 - total flux cleaned = -0.000785418 Jy ! Component: 500 - total flux cleaned = -0.000929288 Jy ! Component: 550 - total flux cleaned = -0.000997815 Jy ! Component: 600 - total flux cleaned = -0.00106503 Jy ! Component: 650 - total flux cleaned = -0.00116401 Jy ! Component: 700 - total flux cleaned = -0.00119616 Jy ! Component: 750 - total flux cleaned = -0.00125961 Jy ! Component: 800 - total flux cleaned = -0.00122827 Jy ! Component: 850 - total flux cleaned = -0.00110632 Jy ! Component: 900 - total flux cleaned = -0.00107642 Jy ! Component: 950 - total flux cleaned = -0.00101713 Jy ! Component: 1000 - total flux cleaned = -0.00090197 Jy ! Component: 1050 - total flux cleaned = -0.000873307 Jy ! Component: 1100 - total flux cleaned = -0.000733861 Jy ! Component: 1150 - total flux cleaned = -0.000678735 Jy ! Component: 1200 - total flux cleaned = -0.000543331 Jy ! Component: 1250 - total flux cleaned = -0.000463282 Jy ! Component: 1300 - total flux cleaned = -0.000384495 Jy ! Component: 1350 - total flux cleaned = -0.000384444 Jy ! Component: 1400 - total flux cleaned = -0.000358925 Jy ! Component: 1450 - total flux cleaned = -0.000358831 Jy ! Component: 1500 - total flux cleaned = -0.000259171 Jy ! Component: 1550 - total flux cleaned = -0.000308219 Jy ! Component: 1600 - total flux cleaned = -0.000186752 Jy ! Component: 1650 - total flux cleaned = -0.000283389 Jy ! Component: 1700 - total flux cleaned = -0.000307414 Jy ! Component: 1750 - total flux cleaned = -0.000284406 Jy ! Component: 1800 - total flux cleaned = -0.000331419 Jy ! Component: 1850 - total flux cleaned = -0.000331653 Jy ! Component: 1900 - total flux cleaned = -0.000331541 Jy ! Component: 1950 - total flux cleaned = -0.000308879 Jy ! Component: 2000 - total flux cleaned = -0.000308899 Jy ! Total flux subtracted in 2048 components = -0.000242737 Jy ! Clean residual min=-0.001319 max=0.001468 Jy/beam ! Clean residual mean=-0.000000 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.122144 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 176 components and 0.122144 Jy ![Exited script file: muppet] wmap "J0506-0950_S_2006_12_18_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.357 x 8.376 at -1.733 degrees (North through East) ! Clean map min=-0.0023421 max=0.10866 Jy/beam ! Writing clean map to FITS file: J0506-0950_S_2006_12_18_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108656 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000457579 device "J0506-0950_S_2006_12_18_yyk\_map.eps/VPS" ! Attempting to open device: 'J0506-0950_S_2006_12_18_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.26338 1.26338 2.52675 5.0535 10.107 20.214 40.428 80.856 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.357 x 8.376 at -1.733 degrees (North through East) ! Clean map min=-0.0023421 max=0.10866 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0506-0950_S_2006_12_18_yyk\_map.gif/gif" ! Attempting to open device: 'J0506-0950_S_2006_12_18_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0506-0950_S_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:16:35 2008