! Started logfile: J0336-2036_X_2006_12_18_yyk_uvs.log on Mon Jun 16 19:11:53 2008
obs J0336-2036_X_2006_12_18_yyk_uve.fits
! Reading UV FITS file: J0336-2036_X_2006_12_18_yyk_uve.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.964444 visibilities/baseline/integration-bin.
! Found source: J0336-2036
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2161 lines of history.
! 
! Reading 2604 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0336-2036_X_2006_12_18_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.111161 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7174 mas, bmaj=1.993 mas, bpa=-6.535 degrees
! Estimated noise=1.3095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0630237 Jy
! Component: 100  -  total flux cleaned = 0.0751256 Jy
! Total flux subtracted in 100 components = 0.0751256 Jy
! Clean residual min=-0.008418 max=0.008222 Jy/beam
! Clean residual mean=-0.000015 rms=0.002188 Jy/beam
! Combined flux in latest and established models = 0.0751257 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0751257 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.080799Jy  sigma=1.399954
! Fit after  self-cal, rms=0.067185Jy  sigma=1.156145
! Inverting map and beam 
! Estimated beam: bmin=0.7174 mas, bmaj=1.993 mas, bpa=-6.535 degrees
! Estimated noise=1.30936 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141237 Jy
! Component: 100  -  total flux cleaned = 0.0207524 Jy
! Total flux subtracted in 100 components = 0.0207524 Jy
! Clean residual min=-0.006125 max=0.007165 Jy/beam
! Clean residual mean=-0.000004 rms=0.001713 Jy/beam
! Combined flux in latest and established models = 0.095878 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 18 components and 0.095878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063971Jy  sigma=1.087345
! Fit after  self-cal, rms=0.063864Jy  sigma=1.084901
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9514 mas, bmaj=2.54 mas, bpa=-4.846 degrees
! Estimated noise=0.841868 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00548826 Jy
! Component: 100  -  total flux cleaned = 0.00622117 Jy
! Component: 150  -  total flux cleaned = 0.00648391 Jy
! Component: 200  -  total flux cleaned = 0.00661792 Jy
! Total flux subtracted in 200 components = 0.00661792 Jy
! Clean residual min=-0.003602 max=0.005083 Jy/beam
! Clean residual mean=0.000007 rms=0.001032 Jy/beam
! Combined flux in latest and established models = 0.102496 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.102496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063522Jy  sigma=1.077997
! Fit after  self-cal, rms=0.063385Jy  sigma=1.075736
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9514 x 2.54 at -4.846 degrees (North through East)
! Clean map  min=-0.0033888  max=0.084333 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01197
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.03     HN        1.04     KP        0.95     
!   LA        1.02     MK        0.99     NL        0.92     OV        0.95     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00446
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.00*    KP        0.89     
!   LA        0.88     MK        1.09     NL        1.01     OV        1.12     
!   PT        1.01     SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.953383
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.08     HN        1.10     KP        0.88     
!   LA        1.06     MK        1.00*    NL        0.98     OV        1.13     
!   PT        1.15     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.063385Jy  sigma=1.075736
! Fit after  self-cal, rms=0.063184Jy  sigma=1.068045
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063184Jy  sigma=1.068045
! Fit after  self-cal, rms=0.063063Jy  sigma=1.066085
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9641 mas, bmaj=2.567 mas, bpa=-4.878 degrees
! Estimated noise=0.839738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, -5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00302837 Jy
! Component: 100  -  total flux cleaned = 0.002619 Jy
! Component: 150  -  total flux cleaned = 0.00219725 Jy
! Component: 200  -  total flux cleaned = 0.00177707 Jy
! Total flux subtracted in 200 components = 0.00177707 Jy
! Clean residual min=-0.003027 max=0.002798 Jy/beam
! Clean residual mean=0.000007 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.104273 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 39 components and 0.104273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062681Jy  sigma=1.058739
! Fit after  self-cal, rms=0.062505Jy  sigma=1.055960
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062505Jy  sigma=1.055960
! Fit after  self-cal, rms=0.055924Jy  sigma=0.947613
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00405772 Jy
! Component: 100  -  total flux cleaned = 0.00527509 Jy
! Component: 150  -  total flux cleaned = 0.00521586 Jy
! Component: 200  -  total flux cleaned = 0.00521279 Jy
! Total flux subtracted in 200 components = 0.00521279 Jy
! Clean residual min=-0.002881 max=0.003004 Jy/beam
! Clean residual mean=0.000010 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.109486 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 52 components and 0.109486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055638Jy  sigma=0.942814
! Fit after  self-cal, rms=0.055179Jy  sigma=0.938602
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9641 x 2.567 at -4.878 degrees (North through East)
! Clean map  min=-0.0027426  max=0.08722 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.286 mas, bmaj=5.419 mas, bpa=1.578 degrees
! Estimated noise=1.01608 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000658321 Jy
! Component: 100  -  total flux cleaned = 0.000629496 Jy
! Component: 150  -  total flux cleaned = 0.000606813 Jy
! Component: 200  -  total flux cleaned = 0.000645668 Jy
! Total flux subtracted in 200 components = 0.000645668 Jy
! Clean residual min=-0.003351 max=0.003442 Jy/beam
! Clean residual mean=0.000013 rms=0.001028 Jy/beam
! Combined flux in latest and established models = 0.110131 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 67 components and 0.110131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055164Jy  sigma=0.938203
! Fit after  self-cal, rms=0.055047Jy  sigma=0.937705
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7212 mas, bmaj=1.998 mas, bpa=-6.495 degrees
! Estimated noise=1.3205 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0774327 Jy
! Component: 100  -  total flux cleaned = 0.0927852 Jy
! Component: 150  -  total flux cleaned = 0.10078 Jy
! Component: 200  -  total flux cleaned = 0.103099 Jy
! Total flux subtracted in 200 components = 0.103099 Jy
! Clean residual min=-0.005904 max=0.005420 Jy/beam
! Clean residual mean=-0.000007 rms=0.001408 Jy/beam
! Combined flux in latest and established models = 0.103099 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.103099 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9641 mas, bmaj=2.567 mas, bpa=-4.878 degrees
! Estimated noise=0.839738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00476499 Jy
! Component: 100  -  total flux cleaned = 0.00488948 Jy
! Component: 150  -  total flux cleaned = 0.0050366 Jy
! Component: 200  -  total flux cleaned = 0.00510313 Jy
! Total flux subtracted in 200 components = 0.00510313 Jy
! Clean residual min=-0.003108 max=0.002855 Jy/beam
! Clean residual mean=0.000000 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.108202 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 52 components and 0.108202 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.286 mas, bmaj=5.419 mas, bpa=1.578 degrees
! Estimated noise=1.01608 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000974273 Jy
! Component: 100  -  total flux cleaned = 0.00103821 Jy
! Component: 150  -  total flux cleaned = 0.0010927 Jy
! Component: 200  -  total flux cleaned = 0.00113813 Jy
! Total flux subtracted in 200 components = 0.00113813 Jy
! Clean residual min=-0.003330 max=0.003324 Jy/beam
! Clean residual mean=0.000007 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.109341 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 63 components and 0.109341 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9641 mas, bmaj=2.567 mas, bpa=-4.878 degrees
! Estimated noise=0.839738 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000185986 Jy
! Component: 100  -  total flux cleaned = -0.00028543 Jy
! Component: 150  -  total flux cleaned = -0.000415807 Jy
! Component: 200  -  total flux cleaned = -0.00045578 Jy
! Total flux subtracted in 200 components = -0.00045578 Jy
! Clean residual min=-0.002968 max=0.002760 Jy/beam
! Clean residual mean=0.000003 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.108885 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 72 components and 0.108885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054931Jy  sigma=0.936631
! Fit after  self-cal, rms=0.054839Jy  sigma=0.936196
wmodel J0336-2036_X_2006_12_18_yyk\_map.mod
! Writing 72 model components to file: J0336-2036_X_2006_12_18_yyk_map.mod
wobs J0336-2036_X_2006_12_18_yyk\_uvs.fits
! Writing UV FITS file: J0336-2036_X_2006_12_18_yyk_uvs.fits
wwins J0336-2036_X_2006_12_18_yyk\_map.win
! wwins: Wrote 2 windows to J0336-2036_X_2006_12_18_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000239456 Jy
! Component: 100  -  total flux cleaned = -0.000332851 Jy
! Component: 150  -  total flux cleaned = -0.000332771 Jy
! Component: 200  -  total flux cleaned = -0.000248466 Jy
! Component: 250  -  total flux cleaned = -0.000288963 Jy
! Component: 300  -  total flux cleaned = -0.000209117 Jy
! Component: 350  -  total flux cleaned = -0.000170799 Jy
! Component: 400  -  total flux cleaned = -0.000170028 Jy
! Component: 450  -  total flux cleaned = -9.61421e-05 Jy
! Component: 500  -  total flux cleaned = -2.45442e-05 Jy
! Component: 550  -  total flux cleaned = -9.28608e-05 Jy
! Component: 600  -  total flux cleaned = -9.14095e-05 Jy
! Component: 650  -  total flux cleaned = -2.46284e-05 Jy
! Component: 700  -  total flux cleaned = 4.01259e-05 Jy
! Component: 750  -  total flux cleaned = 7.17202e-05 Jy
! Component: 800  -  total flux cleaned = 4.03653e-05 Jy
! Component: 850  -  total flux cleaned = 0.000131118 Jy
! Component: 900  -  total flux cleaned = 4.08164e-05 Jy
! Component: 950  -  total flux cleaned = -7.6409e-05 Jy
! Component: 1000  -  total flux cleaned = -1.90263e-05 Jy
! Component: 1050  -  total flux cleaned = -4.6875e-05 Jy
! Component: 1100  -  total flux cleaned = 6.42833e-05 Jy
! Component: 1150  -  total flux cleaned = 6.36816e-05 Jy
! Component: 1200  -  total flux cleaned = 9.05828e-05 Jy
! Component: 1250  -  total flux cleaned = 0.000143778 Jy
! Component: 1300  -  total flux cleaned = 0.000195833 Jy
! Component: 1350  -  total flux cleaned = 0.000195825 Jy
! Component: 1400  -  total flux cleaned = 0.000221363 Jy
! Component: 1450  -  total flux cleaned = 0.000320516 Jy
! Component: 1500  -  total flux cleaned = 0.000344691 Jy
! Component: 1550  -  total flux cleaned = 0.000369206 Jy
! Component: 1600  -  total flux cleaned = 0.000463793 Jy
! Component: 1650  -  total flux cleaned = 0.000486304 Jy
! Component: 1700  -  total flux cleaned = 0.000463169 Jy
! Component: 1750  -  total flux cleaned = 0.000440461 Jy
! Component: 1800  -  total flux cleaned = 0.000440424 Jy
! Component: 1850  -  total flux cleaned = 0.000440868 Jy
! Component: 1900  -  total flux cleaned = 0.000528571 Jy
! Component: 1950  -  total flux cleaned = 0.000593373 Jy
! Component: 2000  -  total flux cleaned = 0.000614638 Jy
! Total flux subtracted in 2048 components = 0.000657047 Jy
! Clean residual min=-0.001282 max=0.001076 Jy/beam
! Clean residual mean=0.000002 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.109542 Jy
keep
! Adding 130 model components to the UV plane model.
! The established model now contains 202 components and 0.109542 Jy
![Exited script file: muppet]
wmap "J0336-2036_X_2006_12_18_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9641 x 2.567 at -4.878 degrees (North through East)
! Clean map  min=-0.0021555  max=0.089414 Jy/beam
! Writing clean map to FITS file: J0336-2036_X_2006_12_18_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0894145 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000409173 
device "J0336-2036_X_2006_12_18_yyk\_map.eps/VPS"
! Attempting to open device: 'J0336-2036_X_2006_12_18_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.37284 1.37284 2.74568 5.49137 10.9827 21.9655 43.9309 87.8619
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.089 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9641 x 2.567 at -4.878 degrees (North through East)
! Clean map  min=-0.0021555  max=0.089414 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0336-2036_X_2006_12_18_yyk\_map.gif/gif"
! Attempting to open device: 'J0336-2036_X_2006_12_18_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0336-2036_X_2006_12_18_yyk_uvs.log closed on Mon Jun 16 19:11:58 2008