! Started logfile: J0216-1017_S_2007_01_11_yyk_uvs.log on Mon Jun 16 19:08:42 2008 obs J0216-1017_S_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J0216-1017_S_2007_01_11_yyk_uve.fits ! AN table 1: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.831481 visibilities/baseline/integration-bin. ! Found source: J0216-1017 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2249 lines of history. ! ! Reading 1796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0216-1017_S_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.130886 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.425 mas, bmaj=6.525 mas, bpa=0.3321 degrees ! Estimated noise=1.54644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0950168 Jy ! Component: 100 - total flux cleaned = 0.110775 Jy ! Total flux subtracted in 100 components = 0.110775 Jy ! Clean residual min=-0.006338 max=0.007129 Jy/beam ! Clean residual mean=0.000086 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 0.110775 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.110775 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.063966Jy sigma=1.019549 ! Fit after self-cal, rms=0.063494Jy sigma=1.014482 ! Inverting map and beam ! Estimated beam: bmin=2.427 mas, bmaj=6.525 mas, bpa=0.3554 degrees ! Estimated noise=1.56666 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=8.009 mas, bpa=-2.335 degrees ! Estimated noise=1.01024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117645 Jy ! Component: 100 - total flux cleaned = 0.0167311 Jy ! Component: 150 - total flux cleaned = 0.0190702 Jy ! Component: 200 - total flux cleaned = 0.0202304 Jy ! Total flux subtracted in 200 components = 0.0202304 Jy ! Clean residual min=-0.004175 max=0.003671 Jy/beam ! Clean residual mean=-0.000014 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.131005 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 40 components and 0.131005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062103Jy sigma=0.987453 ! Fit after self-cal, rms=0.062075Jy sigma=0.986972 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.985 x 8.009 at -2.335 degrees (North through East) ! Clean map min=-0.0039225 max=0.111 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01736 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.89 HN 0.92 KP 0.93 ! LA 1.05 MK 1.01 OV 1.04 PT 1.04 ! SC 1.05 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983608 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.04 KP 0.96 ! LA 1.03 MK 1.06 OV 1.04 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.960222 ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.01 HN 1.01 KP 0.98 ! LA 1.06 MK 0.98 OV 1.14 PT 1.06 ! SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01738 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.08 KP 0.96 ! LA 0.95 MK 0.99 OV 1.02 PT 0.91 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.062075Jy sigma=0.986972 ! Fit after self-cal, rms=0.061158Jy sigma=0.975577 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061158Jy sigma=0.975577 ! Fit after self-cal, rms=0.061156Jy sigma=0.975489 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=8.083 mas, bpa=-2.101 degrees ! Estimated noise=0.995237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111074 Jy ! Component: 100 - total flux cleaned = -0.00130079 Jy ! Component: 150 - total flux cleaned = -0.00135719 Jy ! Component: 200 - total flux cleaned = -0.00135757 Jy ! Total flux subtracted in 200 components = -0.00135757 Jy ! Clean residual min=-0.003440 max=0.002832 Jy/beam ! Clean residual mean=0.000046 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.129648 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.129648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061145Jy sigma=0.974730 ! Fit after self-cal, rms=0.061137Jy sigma=0.974577 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061137Jy sigma=0.974577 ! Fit after self-cal, rms=0.058371Jy sigma=0.924502 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837611 Jy ! Component: 100 - total flux cleaned = 0.000955216 Jy ! Component: 150 - total flux cleaned = 0.00103959 Jy ! Component: 200 - total flux cleaned = 0.00105548 Jy ! Total flux subtracted in 200 components = 0.00105548 Jy ! Clean residual min=-0.003226 max=0.002889 Jy/beam ! Clean residual mean=0.000048 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.130703 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.130703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058314Jy sigma=0.923994 ! Fit after self-cal, rms=0.058187Jy sigma=0.921216 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.994 x 8.083 at -2.101 degrees (North through East) ! Clean map min=-0.0030412 max=0.11098 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058187Jy sigma=0.921216 ! Fit after self-cal, rms=0.056994Jy sigma=0.914499 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056994Jy sigma=0.914499 ! Fit after self-cal, rms=0.056994Jy sigma=0.914195 ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=8.088 mas, bpa=-2.151 degrees ! Estimated noise=0.983954 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000628222 Jy ! Component: 100 - total flux cleaned = -0.00077817 Jy ! Component: 150 - total flux cleaned = -0.000847535 Jy ! Component: 200 - total flux cleaned = -0.000866307 Jy ! Total flux subtracted in 200 components = -0.000866307 Jy ! Clean residual min=-0.003187 max=0.002886 Jy/beam ! Clean residual mean=0.000024 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.129837 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.129837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056978Jy sigma=0.913665 ! Fit after self-cal, rms=0.056983Jy sigma=0.913590 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056983Jy sigma=0.913590 ! Fit after self-cal, rms=0.056967Jy sigma=0.916133 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056967Jy sigma=0.916133 ! Fit after self-cal, rms=0.056978Jy sigma=0.915939 ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=8.108 mas, bpa=-2.258 degrees ! Estimated noise=0.968707 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00205217 Jy ! Component: 100 - total flux cleaned = -0.00241874 Jy ! Component: 150 - total flux cleaned = -0.00254768 Jy ! Component: 200 - total flux cleaned = -0.00261312 Jy ! Total flux subtracted in 200 components = -0.00261312 Jy ! Clean residual min=-0.003241 max=0.003395 Jy/beam ! Clean residual mean=-0.000021 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.127224 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.127224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056975Jy sigma=0.914823 ! Fit after self-cal, rms=0.056977Jy sigma=0.914777 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.515 mas, bmaj=15.85 mas, bpa=9.201 degrees ! Estimated noise=1.28713 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237475 Jy ! Component: 100 - total flux cleaned = 0.000255364 Jy ! Component: 150 - total flux cleaned = 0.000270167 Jy ! Component: 200 - total flux cleaned = 0.000271136 Jy ! Total flux subtracted in 200 components = 0.000271136 Jy ! Clean residual min=-0.003600 max=0.003228 Jy/beam ! Clean residual mean=-0.000047 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.127495 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.127495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056978Jy sigma=0.914751 ! Fit after self-cal, rms=0.056977Jy sigma=0.914711 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.418 mas, bmaj=6.538 mas, bpa=0.5493 degrees ! Estimated noise=1.52906 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0944459 Jy ! Component: 100 - total flux cleaned = 0.110454 Jy ! Component: 150 - total flux cleaned = 0.117921 Jy ! Component: 200 - total flux cleaned = 0.122403 Jy ! Total flux subtracted in 200 components = 0.122403 Jy ! Clean residual min=-0.004943 max=0.004727 Jy/beam ! Clean residual mean=0.000011 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.122403 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.122403 Jy ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=8.108 mas, bpa=-2.258 degrees ! Estimated noise=0.968707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376387 Jy ! Component: 100 - total flux cleaned = 0.00401529 Jy ! Component: 150 - total flux cleaned = 0.00413191 Jy ! Component: 200 - total flux cleaned = 0.00426704 Jy ! Total flux subtracted in 200 components = 0.00426704 Jy ! Clean residual min=-0.003300 max=0.003485 Jy/beam ! Clean residual mean=-0.000017 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.12667 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.12667 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.515 mas, bmaj=15.85 mas, bpa=9.201 degrees ! Estimated noise=1.28713 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744548 Jy ! Component: 100 - total flux cleaned = 0.000758312 Jy ! Component: 150 - total flux cleaned = 0.000771588 Jy ! Component: 200 - total flux cleaned = 0.000794935 Jy ! Total flux subtracted in 200 components = 0.000794935 Jy ! Clean residual min=-0.003618 max=0.003198 Jy/beam ! Clean residual mean=-0.000046 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.127465 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.127465 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=8.108 mas, bpa=-2.258 degrees ! Estimated noise=0.968707 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000324542 Jy ! Component: 100 - total flux cleaned = -0.000352994 Jy ! Component: 150 - total flux cleaned = -0.000335419 Jy ! Component: 200 - total flux cleaned = -0.000302798 Jy ! Total flux subtracted in 200 components = -0.000302798 Jy ! Clean residual min=-0.003240 max=0.003393 Jy/beam ! Clean residual mean=-0.000020 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.127162 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.127162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056965Jy sigma=0.914457 ! Fit after self-cal, rms=0.056965Jy sigma=0.914426 wmodel J0216-1017_S_2007_01_11_yyk\_map.mod ! Writing 45 model components to file: J0216-1017_S_2007_01_11_yyk_map.mod wobs J0216-1017_S_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J0216-1017_S_2007_01_11_yyk_uvs.fits wwins J0216-1017_S_2007_01_11_yyk\_map.win ! wwins: Wrote 1 windows to J0216-1017_S_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258718 Jy ! Component: 100 - total flux cleaned = -0.00102891 Jy ! Component: 150 - total flux cleaned = -0.0015053 Jy ! Component: 200 - total flux cleaned = -0.00177613 Jy ! Component: 250 - total flux cleaned = -0.00190427 Jy ! Component: 300 - total flux cleaned = -0.00214967 Jy ! Component: 350 - total flux cleaned = -0.0022283 Jy ! Component: 400 - total flux cleaned = -0.0022656 Jy ! Component: 450 - total flux cleaned = -0.00230223 Jy ! Component: 500 - total flux cleaned = -0.00223095 Jy ! Component: 550 - total flux cleaned = -0.00216173 Jy ! Component: 600 - total flux cleaned = -0.00212858 Jy ! Component: 650 - total flux cleaned = -0.00202924 Jy ! Component: 700 - total flux cleaned = -0.00193248 Jy ! Component: 750 - total flux cleaned = -0.00180708 Jy ! Component: 800 - total flux cleaned = -0.00177673 Jy ! Component: 850 - total flux cleaned = -0.00168722 Jy ! Component: 900 - total flux cleaned = -0.00159893 Jy ! Component: 950 - total flux cleaned = -0.00145486 Jy ! Component: 1000 - total flux cleaned = -0.00142659 Jy ! Component: 1050 - total flux cleaned = -0.00125995 Jy ! Component: 1100 - total flux cleaned = -0.00115126 Jy ! Component: 1150 - total flux cleaned = -0.00112455 Jy ! Component: 1200 - total flux cleaned = -0.00101957 Jy ! Component: 1250 - total flux cleaned = -0.00104521 Jy ! Component: 1300 - total flux cleaned = -0.00109631 Jy ! Component: 1350 - total flux cleaned = -0.00114639 Jy ! Component: 1400 - total flux cleaned = -0.00117134 Jy ! Component: 1450 - total flux cleaned = -0.00131704 Jy ! Component: 1500 - total flux cleaned = -0.00131724 Jy ! Component: 1550 - total flux cleaned = -0.00138794 Jy ! Component: 1600 - total flux cleaned = -0.00145774 Jy ! Component: 1650 - total flux cleaned = -0.00159567 Jy ! Component: 1700 - total flux cleaned = -0.0016634 Jy ! Component: 1750 - total flux cleaned = -0.00170808 Jy ! Component: 1800 - total flux cleaned = -0.00177503 Jy ! Component: 1850 - total flux cleaned = -0.00186256 Jy ! Component: 1900 - total flux cleaned = -0.00190581 Jy ! Component: 1950 - total flux cleaned = -0.00190555 Jy ! Component: 2000 - total flux cleaned = -0.00192666 Jy ! Total flux subtracted in 2048 components = -0.00194765 Jy ! Clean residual min=-0.001274 max=0.001260 Jy/beam ! Clean residual mean=0.000004 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.125215 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 180 components and 0.125215 Jy ![Exited script file: muppet] wmap "J0216-1017_S_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.994 x 8.108 at -2.258 degrees (North through East) ! Clean map min=-0.00246 max=0.10856 Jy/beam ! Writing clean map to FITS file: J0216-1017_S_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108563 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000416618 device "J0216-1017_S_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J0216-1017_S_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15127 1.15127 2.30253 4.60507 9.21014 18.4203 36.8405 73.6811 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.994 x 8.108 at -2.258 degrees (North through East) ! Clean map min=-0.00246 max=0.10856 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0216-1017_S_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J0216-1017_S_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0216-1017_S_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:08:48 2008