! Started logfile: J0110-0415_X_2007_01_11_yyk_uvs.log on Mon Jun 16 19:05:57 2008 obs J0110-0415_X_2007_01_11_yyk_uve.fits ! Reading UV FITS file: J0110-0415_X_2007_01_11_yyk_uve.fits ! AN table 1: 17 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.849673 visibilities/baseline/integration-bin. ! Found source: J0110-0415 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2143 lines of history. ! ! Reading 2080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0110-0415_X_2007_01_11_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.208374 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.673 mas, bmaj=1.735 mas, bpa=-0.6026 degrees ! Estimated noise=1.23767 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.16611 Jy ! Component: 100 - total flux cleaned = 0.189503 Jy ! Total flux subtracted in 100 components = 0.189503 Jy ! Clean residual min=-0.007397 max=0.006348 Jy/beam ! Clean residual mean=0.000007 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.189503 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.189503 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.075759Jy sigma=1.233319 ! Fit after self-cal, rms=0.075132Jy sigma=1.230366 ! Inverting map and beam ! Estimated beam: bmin=0.6727 mas, bmaj=1.735 mas, bpa=-0.5785 degrees ! Estimated noise=1.23729 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8804 mas, bmaj=2.13 mas, bpa=-1.42 degrees ! Estimated noise=0.870766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00884851 Jy ! Component: 100 - total flux cleaned = 0.0120041 Jy ! Component: 150 - total flux cleaned = 0.0133603 Jy ! Component: 200 - total flux cleaned = 0.0137532 Jy ! Total flux subtracted in 200 components = 0.0137532 Jy ! Clean residual min=-0.004560 max=0.004502 Jy/beam ! Clean residual mean=0.000008 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.203256 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 34 components and 0.203256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074397Jy sigma=1.216532 ! Fit after self-cal, rms=0.074371Jy sigma=1.216245 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8804 x 2.13 at -1.42 degrees (North through East) ! Clean map min=-0.0041559 max=0.19448 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00093 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.06 KP 1.02 ! LA 1.00 MK 0.98 OV 0.99 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01212 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.05 KP 0.97 ! LA 0.97 MK 0.99 OV 1.00 PT 1.04 ! SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00148 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.95 KP 0.85 ! LA 0.96 MK 1.02 OV 1.06 PT 1.07 ! SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.976215 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.99 KP 0.89 ! LA 0.99 MK 1.04 OV 1.02 PT 1.09 ! SC 1.10 ! ! ! Fit before self-cal, rms=0.074371Jy sigma=1.216245 ! Fit after self-cal, rms=0.073055Jy sigma=1.193460 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073055Jy sigma=1.193460 ! Fit after self-cal, rms=0.073046Jy sigma=1.193247 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8873 mas, bmaj=2.137 mas, bpa=-1.511 degrees ! Estimated noise=0.868423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000970057 Jy ! Component: 100 - total flux cleaned = -0.00102484 Jy ! Component: 150 - total flux cleaned = -0.00106825 Jy ! Component: 200 - total flux cleaned = -0.00108791 Jy ! Total flux subtracted in 200 components = -0.00108791 Jy ! Clean residual min=-0.003291 max=0.003320 Jy/beam ! Clean residual mean=0.000010 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.202168 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.202168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073031Jy sigma=1.192937 ! Fit after self-cal, rms=0.073015Jy sigma=1.192721 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073015Jy sigma=1.192721 ! Fit after self-cal, rms=0.057243Jy sigma=0.946906 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165075 Jy ! Component: 100 - total flux cleaned = 0.00131043 Jy ! Component: 150 - total flux cleaned = 0.00113814 Jy ! Component: 200 - total flux cleaned = 0.00107498 Jy ! Total flux subtracted in 200 components = 0.00107498 Jy ! Clean residual min=-0.003306 max=0.002895 Jy/beam ! Clean residual mean=0.000011 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.203243 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.203243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056892Jy sigma=0.940551 ! Fit after self-cal, rms=0.055172Jy sigma=0.926627 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8873 x 2.137 at -1.511 degrees (North through East) ! Clean map min=-0.0031354 max=0.19924 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055172Jy sigma=0.926627 ! Fit after self-cal, rms=0.054502Jy sigma=0.914915 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054502Jy sigma=0.914915 ! Fit after self-cal, rms=0.054115Jy sigma=0.913068 ! Inverting map and beam ! Estimated beam: bmin=0.8834 mas, bmaj=2.126 mas, bpa=-1.005 degrees ! Estimated noise=0.864553 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.43163e-05 Jy ! Component: 100 - total flux cleaned = 4.8857e-05 Jy ! Component: 150 - total flux cleaned = 5.04751e-05 Jy ! Component: 200 - total flux cleaned = 5.14978e-05 Jy ! Total flux subtracted in 200 components = 5.14978e-05 Jy ! Clean residual min=-0.003530 max=0.002696 Jy/beam ! Clean residual mean=0.000004 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.203295 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.203295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054101Jy sigma=0.912791 ! Fit after self-cal, rms=0.053980Jy sigma=0.912199 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053980Jy sigma=0.912199 ! Fit after self-cal, rms=0.053136Jy sigma=0.892716 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053136Jy sigma=0.892716 ! Fit after self-cal, rms=0.053094Jy sigma=0.892431 ! Inverting map and beam ! Estimated beam: bmin=0.8836 mas, bmaj=2.122 mas, bpa=-0.942 degrees ! Estimated noise=0.864473 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122807 Jy ! Component: 100 - total flux cleaned = 0.000211169 Jy ! Component: 150 - total flux cleaned = 0.000228736 Jy ! Component: 200 - total flux cleaned = 0.000259725 Jy ! Total flux subtracted in 200 components = 0.000259725 Jy ! Clean residual min=-0.003528 max=0.002613 Jy/beam ! Clean residual mean=0.000005 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.203554 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.203554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053082Jy sigma=0.892190 ! Fit after self-cal, rms=0.053062Jy sigma=0.892033 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.463 mas, bmaj=3.693 mas, bpa=11.71 degrees ! Estimated noise=1.13544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.12453e-05 Jy ! Component: 100 - total flux cleaned = -5.03949e-05 Jy ! Component: 150 - total flux cleaned = -6.5561e-05 Jy ! Component: 200 - total flux cleaned = -4.01123e-05 Jy ! Total flux subtracted in 200 components = -4.01123e-05 Jy ! Clean residual min=-0.003633 max=0.002759 Jy/beam ! Clean residual mean=0.000008 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.203514 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.203514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053073Jy sigma=0.891968 ! Fit after self-cal, rms=0.053058Jy sigma=0.891854 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6742 mas, bmaj=1.737 mas, bpa=-0.4583 degrees ! Estimated noise=1.23206 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.17102 Jy ! Component: 100 - total flux cleaned = 0.194145 Jy ! Component: 150 - total flux cleaned = 0.200194 Jy ! Component: 200 - total flux cleaned = 0.202121 Jy ! Total flux subtracted in 200 components = 0.202121 Jy ! Clean residual min=-0.004651 max=0.004138 Jy/beam ! Clean residual mean=0.000001 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.202121 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.202121 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8836 mas, bmaj=2.122 mas, bpa=-0.942 degrees ! Estimated noise=0.864473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165555 Jy ! Component: 100 - total flux cleaned = 0.00172936 Jy ! Component: 150 - total flux cleaned = 0.00165664 Jy ! Component: 200 - total flux cleaned = 0.00168592 Jy ! Total flux subtracted in 200 components = 0.00168592 Jy ! Clean residual min=-0.003637 max=0.002695 Jy/beam ! Clean residual mean=0.000005 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.203807 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.203807 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.463 mas, bmaj=3.693 mas, bpa=11.71 degrees ! Estimated noise=1.13544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250431 Jy ! Component: 100 - total flux cleaned = -0.000267021 Jy ! Component: 150 - total flux cleaned = -0.00025289 Jy ! Component: 200 - total flux cleaned = -0.000239253 Jy ! Total flux subtracted in 200 components = -0.000239253 Jy ! Clean residual min=-0.003707 max=0.002777 Jy/beam ! Clean residual mean=0.000008 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.203568 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.203568 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8836 mas, bmaj=2.122 mas, bpa=-0.942 degrees ! Estimated noise=0.864473 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308618 Jy ! Component: 100 - total flux cleaned = 0.000285835 Jy ! Component: 150 - total flux cleaned = 0.00024387 Jy ! Component: 200 - total flux cleaned = 0.000225215 Jy ! Total flux subtracted in 200 components = 0.000225215 Jy ! Clean residual min=-0.003609 max=0.002647 Jy/beam ! Clean residual mean=0.000005 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.203793 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.203793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053063Jy sigma=0.892362 ! Fit after self-cal, rms=0.053053Jy sigma=0.892262 wmodel J0110-0415_X_2007_01_11_yyk\_map.mod ! Writing 44 model components to file: J0110-0415_X_2007_01_11_yyk_map.mod wobs J0110-0415_X_2007_01_11_yyk\_uvs.fits ! Writing UV FITS file: J0110-0415_X_2007_01_11_yyk_uvs.fits wwins J0110-0415_X_2007_01_11_yyk\_map.win ! wwins: Wrote 1 windows to J0110-0415_X_2007_01_11_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000881503 Jy ! Component: 100 - total flux cleaned = -0.000831269 Jy ! Component: 150 - total flux cleaned = -0.000874861 Jy ! Component: 200 - total flux cleaned = -0.000916862 Jy ! Component: 250 - total flux cleaned = -0.00112121 Jy ! Component: 300 - total flux cleaned = -0.00123794 Jy ! Component: 350 - total flux cleaned = -0.00150519 Jy ! Component: 400 - total flux cleaned = -0.00172738 Jy ! Component: 450 - total flux cleaned = -0.00201581 Jy ! Component: 500 - total flux cleaned = -0.00225979 Jy ! Component: 550 - total flux cleaned = -0.00236196 Jy ! Component: 600 - total flux cleaned = -0.00255938 Jy ! Component: 650 - total flux cleaned = -0.00271847 Jy ! Component: 700 - total flux cleaned = -0.00278044 Jy ! Component: 750 - total flux cleaned = -0.00296328 Jy ! Component: 800 - total flux cleaned = -0.00302325 Jy ! Component: 850 - total flux cleaned = -0.00316998 Jy ! Component: 900 - total flux cleaned = -0.00337067 Jy ! Component: 950 - total flux cleaned = -0.00351112 Jy ! Component: 1000 - total flux cleaned = -0.0037045 Jy ! Component: 1050 - total flux cleaned = -0.0037588 Jy ! Component: 1100 - total flux cleaned = -0.00378562 Jy ! Component: 1150 - total flux cleaned = -0.00383783 Jy ! Component: 1200 - total flux cleaned = -0.00388906 Jy ! Component: 1250 - total flux cleaned = -0.00376121 Jy ! Component: 1300 - total flux cleaned = -0.00373683 Jy ! Component: 1350 - total flux cleaned = -0.00373696 Jy ! Component: 1400 - total flux cleaned = -0.00381003 Jy ! Component: 1450 - total flux cleaned = -0.00383418 Jy ! Component: 1500 - total flux cleaned = -0.00383435 Jy ! Component: 1550 - total flux cleaned = -0.00381078 Jy ! Component: 1600 - total flux cleaned = -0.00383363 Jy ! Component: 1650 - total flux cleaned = -0.00371981 Jy ! Component: 1700 - total flux cleaned = -0.00376479 Jy ! Component: 1750 - total flux cleaned = -0.00372075 Jy ! Component: 1800 - total flux cleaned = -0.00378609 Jy ! Component: 1850 - total flux cleaned = -0.00367755 Jy ! Component: 1900 - total flux cleaned = -0.00372027 Jy ! Component: 1950 - total flux cleaned = -0.00372068 Jy ! Component: 2000 - total flux cleaned = -0.00369983 Jy ! Total flux subtracted in 2048 components = -0.00374148 Jy ! Clean residual min=-0.001161 max=0.001232 Jy/beam ! Clean residual mean=0.000002 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.200051 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 180 components and 0.200051 Jy ![Exited script file: muppet] wmap "J0110-0415_X_2007_01_11_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8836 x 2.122 at -0.942 degrees (North through East) ! Clean map min=-0.0027664 max=0.19872 Jy/beam ! Writing clean map to FITS file: J0110-0415_X_2007_01_11_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.198717 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000383405 device "J0110-0415_X_2007_01_11_yyk\_map.eps/VPS" ! Attempting to open device: 'J0110-0415_X_2007_01_11_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.578821 0.578821 1.15764 2.31528 4.63057 9.26113 18.5223 37.0445 74.0891 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.198 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8836 x 2.122 at -0.942 degrees (North through East) ! Clean map min=-0.0027664 max=0.19872 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0110-0415_X_2007_01_11_yyk\_map.gif/gif" ! Attempting to open device: 'J0110-0415_X_2007_01_11_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0110-0415_X_2007_01_11_yyk_uvs.log closed on Mon Jun 16 19:06:03 2008