! Started logfile: J2359-3133_S_2005_07_09_yyk_uvs.log on Fri Jan 20 11:14:20 2006 obs J2359-3133_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J2359-3133_S_2005_07_09_yyk_uve.fits ! AN table 1: 3 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.740741 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2359-3133_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.522652 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.468 mas, bmaj=6.52 mas, bpa=-3.114 degrees ! Estimated noise=3.05215 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.342057 Jy ! Component: 100 - total flux cleaned = 0.349802 Jy ! Total flux subtracted in 100 components = 0.349802 Jy ! Clean residual min=-0.075807 max=0.125675 Jy/beam ! Clean residual mean=0.001071 rms=0.026330 Jy/beam ! Combined flux in latest and established models = 0.349802 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.349802 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.329119Jy sigma=5.602389 ! Fit after self-cal, rms=0.177961Jy sigma=2.866586 ! Inverting map and beam ! Estimated beam: bmin=2.468 mas, bmaj=6.52 mas, bpa=-3.114 degrees ! Estimated noise=3.05215 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=7.557 mas, bpa=-3.535 degrees ! Estimated noise=2.47883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115146 Jy ! Component: 100 - total flux cleaned = 0.141136 Jy ! Component: 150 - total flux cleaned = 0.149699 Jy ! Component: 200 - total flux cleaned = 0.149929 Jy ! Total flux subtracted in 200 components = 0.149929 Jy ! Clean residual min=-0.030149 max=0.035480 Jy/beam ! Clean residual mean=0.000010 rms=0.008413 Jy/beam ! Combined flux in latest and established models = 0.499731 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 30 components and 0.499731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104695Jy sigma=1.766934 ! Fit after self-cal, rms=0.104708Jy sigma=1.766826 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.884 x 7.557 at -3.535 degrees (North through East) ! Clean map min=-0.029088 max=0.4947 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01853 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.00* KP 0.87 ! LA 1.07 MK 0.86 NL 0.98 OV 1.03 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.995566 ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 1.00* KP 0.94 ! LA 1.06 MK 1.02 NL 0.94 OV 1.04 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.951688 ! Telescope amplitude corrections in sub-array 1: ! BR 1.55 FD 1.00* HN 1.00* KP 0.89 ! LA 0.91 MK 1.09 NL 1.00 OV 1.05 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02828 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* HN 1.00* KP 0.80 ! LA 1.00* MK 1.04 NL 0.90 OV 0.90 ! PT 0.87 SC 1.10 ! ! ! Fit before self-cal, rms=0.104708Jy sigma=1.766826 ! Fit after self-cal, rms=0.076932Jy sigma=1.219128 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076932Jy sigma=1.219128 ! Fit after self-cal, rms=0.076930Jy sigma=1.218973 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.677 mas, bpa=-3.248 degrees ! Estimated noise=2.40851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0068258 Jy ! Component: 100 - total flux cleaned = -0.00772198 Jy ! Component: 150 - total flux cleaned = -0.00793329 Jy ! Component: 200 - total flux cleaned = -0.00792875 Jy ! Total flux subtracted in 200 components = -0.00792875 Jy ! Clean residual min=-0.007329 max=0.009382 Jy/beam ! Clean residual mean=-0.000073 rms=0.002388 Jy/beam ! Combined flux in latest and established models = 0.491802 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.491802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076684Jy sigma=1.210591 ! Fit after self-cal, rms=0.076689Jy sigma=1.210488 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076689Jy sigma=1.210488 ! Fit after self-cal, rms=0.065405Jy sigma=1.047226 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000926776 Jy ! Component: 100 - total flux cleaned = 0.00104335 Jy ! Component: 150 - total flux cleaned = 0.00104683 Jy ! Component: 200 - total flux cleaned = 0.00109571 Jy ! Total flux subtracted in 200 components = 0.00109571 Jy ! Clean residual min=-0.006710 max=0.009530 Jy/beam ! Clean residual mean=-0.000059 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 0.492898 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.492898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065247Jy sigma=1.045865 ! Fit after self-cal, rms=0.064793Jy sigma=1.038728 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 7.677 at -3.248 degrees (North through East) ! Clean map min=-0.0063813 max=0.48854 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064793Jy sigma=1.038728 ! Fit after self-cal, rms=0.056318Jy sigma=0.885050 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056318Jy sigma=0.885050 ! Fit after self-cal, rms=0.056319Jy sigma=0.884591 ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.679 mas, bpa=-3.275 degrees ! Estimated noise=2.40301 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560046 Jy ! Component: 100 - total flux cleaned = 0.00055783 Jy ! Component: 150 - total flux cleaned = 0.000612606 Jy ! Component: 200 - total flux cleaned = 0.00061329 Jy ! Total flux subtracted in 200 components = 0.00061329 Jy ! Clean residual min=-0.005982 max=0.007908 Jy/beam ! Clean residual mean=-0.000043 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 0.493511 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.493511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056209Jy sigma=0.883158 ! Fit after self-cal, rms=0.056221Jy sigma=0.883108 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056221Jy sigma=0.883108 ! Fit after self-cal, rms=0.055188Jy sigma=0.865273 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055188Jy sigma=0.865273 ! Fit after self-cal, rms=0.055190Jy sigma=0.865268 ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=7.68 mas, bpa=-3.294 degrees ! Estimated noise=2.40338 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.18651e-05 Jy ! Component: 100 - total flux cleaned = 0.000111931 Jy ! Component: 150 - total flux cleaned = 0.000163148 Jy ! Component: 200 - total flux cleaned = 0.000166496 Jy ! Total flux subtracted in 200 components = 0.000166496 Jy ! Clean residual min=-0.006001 max=0.007811 Jy/beam ! Clean residual mean=-0.000043 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.493678 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.493678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055099Jy sigma=0.864185 ! Fit after self-cal, rms=0.055102Jy sigma=0.864181 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.655 mas, bmaj=25.44 mas, bpa=-3.734 degrees ! Estimated noise=3.19152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451861 Jy ! Component: 100 - total flux cleaned = 0.000444084 Jy ! Component: 150 - total flux cleaned = 0.000440793 Jy ! Component: 200 - total flux cleaned = 0.000439964 Jy ! Total flux subtracted in 200 components = 0.000439964 Jy ! Clean residual min=-0.006905 max=0.008602 Jy/beam ! Clean residual mean=-0.000111 rms=0.002586 Jy/beam ! Combined flux in latest and established models = 0.494118 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.494118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055116Jy sigma=0.864957 ! Fit after self-cal, rms=0.055078Jy sigma=0.864337 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=6.583 mas, bpa=-3.517 degrees ! Estimated noise=3.00055 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.424607 Jy ! Component: 100 - total flux cleaned = 0.481312 Jy ! Component: 150 - total flux cleaned = 0.488599 Jy ! Component: 200 - total flux cleaned = 0.489803 Jy ! Total flux subtracted in 200 components = 0.489803 Jy ! Clean residual min=-0.008587 max=0.008852 Jy/beam ! Clean residual mean=0.000009 rms=0.002541 Jy/beam ! Combined flux in latest and established models = 0.489803 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.489803 Jy ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=7.68 mas, bpa=-3.294 degrees ! Estimated noise=2.40338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375062 Jy ! Component: 100 - total flux cleaned = 0.00415512 Jy ! Component: 150 - total flux cleaned = 0.00447523 Jy ! Component: 200 - total flux cleaned = 0.00454461 Jy ! Total flux subtracted in 200 components = 0.00454461 Jy ! Clean residual min=-0.006251 max=0.007480 Jy/beam ! Clean residual mean=-0.000045 rms=0.001953 Jy/beam ! Combined flux in latest and established models = 0.494347 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 32 components and 0.494347 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.655 mas, bmaj=25.44 mas, bpa=-3.734 degrees ! Estimated noise=3.19152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178789 Jy ! Component: 100 - total flux cleaned = 0.000195104 Jy ! Component: 150 - total flux cleaned = 0.000208817 Jy ! Component: 200 - total flux cleaned = 0.000235789 Jy ! Total flux subtracted in 200 components = 0.000235789 Jy ! Clean residual min=-0.007157 max=0.008281 Jy/beam ! Clean residual mean=-0.000114 rms=0.002593 Jy/beam ! Combined flux in latest and established models = 0.494583 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 35 components and 0.494583 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=7.68 mas, bpa=-3.294 degrees ! Estimated noise=2.40338 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381666 Jy ! Component: 100 - total flux cleaned = -0.000187191 Jy ! Component: 150 - total flux cleaned = -0.000102765 Jy ! Component: 200 - total flux cleaned = -6.49136e-05 Jy ! Total flux subtracted in 200 components = -6.49136e-05 Jy ! Clean residual min=-0.006289 max=0.007367 Jy/beam ! Clean residual mean=-0.000045 rms=0.001930 Jy/beam ! Combined flux in latest and established models = 0.494518 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.494518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055014Jy sigma=0.865377 ! Fit after self-cal, rms=0.054981Jy sigma=0.865057 wmodel J2359-3133_S_2005_07_09_yyk\_map.mod ! Writing 44 model components to file: J2359-3133_S_2005_07_09_yyk_map.mod wobs J2359-3133_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J2359-3133_S_2005_07_09_yyk_uvs.fits wwins J2359-3133_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J2359-3133_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191087 Jy ! Component: 100 - total flux cleaned = 0.00267509 Jy ! Component: 150 - total flux cleaned = 0.00238982 Jy ! Component: 200 - total flux cleaned = 0.00220939 Jy ! Component: 250 - total flux cleaned = 0.00254183 Jy ! Component: 300 - total flux cleaned = 0.00293944 Jy ! Component: 350 - total flux cleaned = 0.0030918 Jy ! Component: 400 - total flux cleaned = 0.00323795 Jy ! Component: 450 - total flux cleaned = 0.00337655 Jy ! Component: 500 - total flux cleaned = 0.00350894 Jy ! Component: 550 - total flux cleaned = 0.00363799 Jy ! Component: 600 - total flux cleaned = 0.00369892 Jy ! Component: 650 - total flux cleaned = 0.00369804 Jy ! Component: 700 - total flux cleaned = 0.00369863 Jy ! Component: 750 - total flux cleaned = 0.00386612 Jy ! Component: 800 - total flux cleaned = 0.00413569 Jy ! Component: 850 - total flux cleaned = 0.00434494 Jy ! Component: 900 - total flux cleaned = 0.00439595 Jy ! Component: 950 - total flux cleaned = 0.00449528 Jy ! Component: 1000 - total flux cleaned = 0.00468842 Jy ! Component: 1050 - total flux cleaned = 0.00468783 Jy ! Component: 1100 - total flux cleaned = 0.00478013 Jy ! Component: 1150 - total flux cleaned = 0.00482518 Jy ! Component: 1200 - total flux cleaned = 0.00482424 Jy ! Component: 1250 - total flux cleaned = 0.00486713 Jy ! Component: 1300 - total flux cleaned = 0.00486693 Jy ! Component: 1350 - total flux cleaned = 0.00486656 Jy ! Component: 1400 - total flux cleaned = 0.00494854 Jy ! Component: 1450 - total flux cleaned = 0.00490729 Jy ! Component: 1500 - total flux cleaned = 0.00490728 Jy ! Component: 1550 - total flux cleaned = 0.00486884 Jy ! Component: 1600 - total flux cleaned = 0.00483037 Jy ! Component: 1650 - total flux cleaned = 0.00479218 Jy ! Component: 1700 - total flux cleaned = 0.00475476 Jy ! Component: 1750 - total flux cleaned = 0.00479171 Jy ! Component: 1800 - total flux cleaned = 0.0047548 Jy ! Component: 1850 - total flux cleaned = 0.00471921 Jy ! Component: 1900 - total flux cleaned = 0.00479113 Jy ! Component: 1950 - total flux cleaned = 0.00468513 Jy ! Component: 2000 - total flux cleaned = 0.00472045 Jy ! Total flux subtracted in 2048 components = 0.00465129 Jy ! Clean residual min=-0.001717 max=0.002342 Jy/beam ! Clean residual mean=-0.000006 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.499169 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 162 components and 0.49917 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.9 x 7.68 at -3.294 degrees (North through East) ! Clean map min=-0.0041524 max=0.49017 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.490167 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000683579 device "J2359-3133_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J2359-3133_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.418375 0.418375 0.836751 1.6735 3.347 6.694 13.388 26.776 53.552 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.49 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.9 x 7.68 at -3.294 degrees (North through East) ! Clean map min=-0.0041524 max=0.49017 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2359-3133_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J2359-3133_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2359-3133_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 11:14:24 2006