! Started logfile: J2351-2203_S_2005_07_20_yyk_uvs.log on Fri Jan 20 11:13:06 2006 obs J2351-2203_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J2351-2203_S_2005_07_20_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J2351-2203 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1526 lines of history. ! ! Reading 1620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2351-2203_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.192385 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=6.728 mas, bpa=-4.143 degrees ! Estimated noise=1.68936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.15158 Jy ! Component: 100 - total flux cleaned = 0.173943 Jy ! Total flux subtracted in 100 components = 0.173943 Jy ! Clean residual min=-0.007999 max=0.008043 Jy/beam ! Clean residual mean=0.000011 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 0.173943 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.173943 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.069919Jy sigma=1.049309 ! Fit after self-cal, rms=0.069596Jy sigma=1.043682 ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=6.729 mas, bpa=-4.143 degrees ! Estimated noise=1.6893 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=8.886 mas, bpa=-7.624 degrees ! Estimated noise=1.12819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0074189 Jy ! Component: 100 - total flux cleaned = 0.00986266 Jy ! Component: 150 - total flux cleaned = 0.0102264 Jy ! Component: 200 - total flux cleaned = 0.0103531 Jy ! Total flux subtracted in 200 components = 0.0103531 Jy ! Clean residual min=-0.005100 max=0.004919 Jy/beam ! Clean residual mean=0.000018 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.184296 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.184296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068772Jy sigma=1.033691 ! Fit after self-cal, rms=0.068770Jy sigma=1.033633 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.298 x 8.886 at -7.624 degrees (North through East) ! Clean map min=-0.0049189 max=0.17324 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00337 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.06 KP 0.96 ! LA 1.07 MK 0.90 NL 1.01 OV 1.00 ! PT 1.05 SC 0.88 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994246 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 1.07 KP 0.99 ! LA 1.05 MK 0.95 NL 1.00 OV 0.98 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.068770Jy sigma=1.033633 ! Fit after self-cal, rms=0.068156Jy sigma=1.023984 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068156Jy sigma=1.023984 ! Fit after self-cal, rms=0.068156Jy sigma=1.023979 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=8.668 mas, bpa=-7.761 degrees ! Estimated noise=1.12712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283912 Jy ! Component: 100 - total flux cleaned = 0.00313629 Jy ! Component: 150 - total flux cleaned = 0.003426 Jy ! Component: 200 - total flux cleaned = 0.00361848 Jy ! Total flux subtracted in 200 components = 0.00361848 Jy ! Clean residual min=-0.005059 max=0.005298 Jy/beam ! Clean residual mean=0.000085 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.187915 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.187915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067967Jy sigma=1.021076 ! Fit after self-cal, rms=0.067967Jy sigma=1.021062 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067967Jy sigma=1.021062 ! Fit after self-cal, rms=0.064949Jy sigma=0.978611 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105716 Jy ! Component: 100 - total flux cleaned = 0.00117321 Jy ! Component: 150 - total flux cleaned = 0.00120756 Jy ! Component: 200 - total flux cleaned = 0.00130455 Jy ! Total flux subtracted in 200 components = 0.00130455 Jy ! Clean residual min=-0.004870 max=0.005175 Jy/beam ! Clean residual mean=0.000083 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.189219 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.189219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064898Jy sigma=0.977991 ! Fit after self-cal, rms=0.064695Jy sigma=0.975646 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.219 x 8.668 at -7.761 degrees (North through East) ! Clean map min=-0.0046663 max=0.17221 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064695Jy sigma=0.975646 ! Fit after self-cal, rms=0.064753Jy sigma=0.964093 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064753Jy sigma=0.964093 ! Fit after self-cal, rms=0.064728Jy sigma=0.963817 ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.554 mas, bpa=-7.745 degrees ! Estimated noise=1.13344 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.002568 Jy ! Component: 100 - total flux cleaned = 0.00329506 Jy ! Component: 150 - total flux cleaned = 0.00346507 Jy ! Component: 200 - total flux cleaned = 0.00362025 Jy ! Total flux subtracted in 200 components = 0.00362025 Jy ! Clean residual min=-0.004873 max=0.004727 Jy/beam ! Clean residual mean=0.000073 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.19284 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.19284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064587Jy sigma=0.962406 ! Fit after self-cal, rms=0.064581Jy sigma=0.962357 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064581Jy sigma=0.962357 ! Fit after self-cal, rms=0.064530Jy sigma=0.955522 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064530Jy sigma=0.955522 ! Fit after self-cal, rms=0.064527Jy sigma=0.955492 ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=8.484 mas, bpa=-7.827 degrees ! Estimated noise=1.14325 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028083 Jy ! Component: 100 - total flux cleaned = 0.003886 Jy ! Component: 150 - total flux cleaned = 0.00404834 Jy ! Component: 200 - total flux cleaned = 0.00422718 Jy ! Total flux subtracted in 200 components = 0.00422718 Jy ! Clean residual min=-0.004716 max=0.004762 Jy/beam ! Clean residual mean=0.000067 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.197067 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.197067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064345Jy sigma=0.953848 ! Fit after self-cal, rms=0.064345Jy sigma=0.953841 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.514 mas, bmaj=19.49 mas, bpa=3.742 degrees ! Estimated noise=1.4491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456939 Jy ! Component: 100 - total flux cleaned = 0.000606211 Jy ! Component: 150 - total flux cleaned = 0.000737668 Jy ! Component: 200 - total flux cleaned = 0.000817892 Jy ! Total flux subtracted in 200 components = 0.000817892 Jy ! Clean residual min=-0.004959 max=0.005024 Jy/beam ! Clean residual mean=0.000126 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 0.197885 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.197885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064397Jy sigma=0.954216 ! Fit after self-cal, rms=0.064401Jy sigma=0.954188 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=6.616 mas, bpa=-4.367 degrees ! Estimated noise=1.67706 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.151642 Jy ! Component: 100 - total flux cleaned = 0.177488 Jy ! Component: 150 - total flux cleaned = 0.187531 Jy ! Component: 200 - total flux cleaned = 0.192465 Jy ! Total flux subtracted in 200 components = 0.192465 Jy ! Clean residual min=-0.007191 max=0.006907 Jy/beam ! Clean residual mean=0.000013 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.192465 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.192465 Jy ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=8.484 mas, bpa=-7.827 degrees ! Estimated noise=1.14325 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257002 Jy ! Component: 100 - total flux cleaned = 0.00296511 Jy ! Component: 150 - total flux cleaned = 0.00324131 Jy ! Component: 200 - total flux cleaned = 0.00343153 Jy ! Total flux subtracted in 200 components = 0.00343153 Jy ! Clean residual min=-0.004697 max=0.004790 Jy/beam ! Clean residual mean=0.000069 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.195896 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.195896 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.514 mas, bmaj=19.49 mas, bpa=3.742 degrees ! Estimated noise=1.4491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595751 Jy ! Component: 100 - total flux cleaned = 0.000816771 Jy ! Component: 150 - total flux cleaned = 0.00101577 Jy ! Component: 200 - total flux cleaned = 0.00125865 Jy ! Total flux subtracted in 200 components = 0.00125865 Jy ! Clean residual min=-0.005036 max=0.005170 Jy/beam ! Clean residual mean=0.000127 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.197155 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.197155 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=8.484 mas, bpa=-7.827 degrees ! Estimated noise=1.14325 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.74356e-05 Jy ! Component: 100 - total flux cleaned = -0.000174044 Jy ! Component: 150 - total flux cleaned = -0.000221604 Jy ! Component: 200 - total flux cleaned = -0.00011445 Jy ! Total flux subtracted in 200 components = -0.00011445 Jy ! Clean residual min=-0.004615 max=0.004687 Jy/beam ! Clean residual mean=0.000066 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.19704 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.19704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064294Jy sigma=0.953372 ! Fit after self-cal, rms=0.064296Jy sigma=0.953349 wmodel J2351-2203_S_2005_07_20_yyk\_map.mod ! Writing 49 model components to file: J2351-2203_S_2005_07_20_yyk_map.mod wobs J2351-2203_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J2351-2203_S_2005_07_20_yyk_uvs.fits wwins J2351-2203_S_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J2351-2203_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000241404 Jy ! Component: 100 - total flux cleaned = -0.000474139 Jy ! Component: 150 - total flux cleaned = -0.000904032 Jy ! Component: 200 - total flux cleaned = -0.00151345 Jy ! Component: 250 - total flux cleaned = -0.00209116 Jy ! Component: 300 - total flux cleaned = -0.00233618 Jy ! Component: 350 - total flux cleaned = -0.00239514 Jy ! Component: 400 - total flux cleaned = -0.00239487 Jy ! Component: 450 - total flux cleaned = -0.00223077 Jy ! Component: 500 - total flux cleaned = -0.00206992 Jy ! Component: 550 - total flux cleaned = -0.00191504 Jy ! Component: 600 - total flux cleaned = -0.00166615 Jy ! Component: 650 - total flux cleaned = -0.00137523 Jy ! Component: 700 - total flux cleaned = -0.000947563 Jy ! Component: 750 - total flux cleaned = -0.000576454 Jy ! Component: 800 - total flux cleaned = -0.000259595 Jy ! Component: 850 - total flux cleaned = 5.06475e-05 Jy ! Component: 900 - total flux cleaned = 0.000442902 Jy ! Component: 950 - total flux cleaned = 0.000826475 Jy ! Component: 1000 - total flux cleaned = 0.00124431 Jy ! Component: 1050 - total flux cleaned = 0.00161269 Jy ! Component: 1100 - total flux cleaned = 0.00185373 Jy ! Component: 1150 - total flux cleaned = 0.00220938 Jy ! Component: 1200 - total flux cleaned = 0.00255875 Jy ! Component: 1250 - total flux cleaned = 0.00282555 Jy ! Component: 1300 - total flux cleaned = 0.00323762 Jy ! Component: 1350 - total flux cleaned = 0.00356908 Jy ! Component: 1400 - total flux cleaned = 0.00378587 Jy ! Component: 1450 - total flux cleaned = 0.00407085 Jy ! Component: 1500 - total flux cleaned = 0.00442148 Jy ! Component: 1550 - total flux cleaned = 0.00462859 Jy ! Component: 1600 - total flux cleaned = 0.00483366 Jy ! Component: 1650 - total flux cleaned = 0.00510314 Jy ! Component: 1700 - total flux cleaned = 0.00540234 Jy ! Component: 1750 - total flux cleaned = 0.0056651 Jy ! Component: 1800 - total flux cleaned = 0.00605359 Jy ! Component: 1850 - total flux cleaned = 0.00630849 Jy ! Component: 1900 - total flux cleaned = 0.00646594 Jy ! Component: 1950 - total flux cleaned = 0.00674676 Jy ! Component: 2000 - total flux cleaned = 0.00699274 Jy ! Total flux subtracted in 2048 components = 0.00711483 Jy ! Clean residual min=-0.002058 max=0.001692 Jy/beam ! Clean residual mean=0.000046 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.204155 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 193 components and 0.204155 Jy ![Exited script file: muppet] wmap "J2351-2203_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.137 x 8.484 at -7.827 degrees (North through East) ! Clean map min=-0.0033868 max=0.17223 Jy/beam ! Writing clean map to FITS file: J2351-2203_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.172231 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000626696 device "J2351-2203_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J2351-2203_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09161 1.09161 2.18321 4.36643 8.73286 17.4657 34.9314 69.8629 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.172 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.137 x 8.484 at -7.827 degrees (North through East) ! Clean map min=-0.0033868 max=0.17223 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2351-2203_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J2351-2203_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2351-2203_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 11:13:11 2006