! Started logfile: J2246-1206_X_2005_07_20_yyk_uvs.log on Fri Jan 20 11:27:23 2006 obs J2246-1206_X_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J2246-1206_X_2005_07_20_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2246-1206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1487 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2246-1206_X_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.68719 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7504 mas, bmaj=1.812 mas, bpa=4.709 degrees ! Estimated noise=2.39125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.30383 Jy ! Component: 100 - total flux cleaned = 1.85619 Jy ! Total flux subtracted in 100 components = 1.85619 Jy ! Clean residual min=-0.124064 max=0.207252 Jy/beam ! Clean residual mean=0.000256 rms=0.041590 Jy/beam ! Combined flux in latest and established models = 1.85619 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.85619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451089Jy sigma=6.818688 ! Fit after self-cal, rms=0.447276Jy sigma=6.763065 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8981 mas, bmaj=2.129 mas, bpa=3.642 degrees ! Estimated noise=1.74653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.29387 Jy ! Component: 100 - total flux cleaned = 0.400337 Jy ! Component: 150 - total flux cleaned = 0.414323 Jy ! Component: 200 - total flux cleaned = 0.419237 Jy ! Total flux subtracted in 200 components = 0.419237 Jy ! Clean residual min=-0.075263 max=0.095066 Jy/beam ! Clean residual mean=-0.000742 rms=0.024346 Jy/beam ! Combined flux in latest and established models = 2.27542 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 2.27542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310816Jy sigma=4.418036 ! Fit after self-cal, rms=0.309667Jy sigma=4.411618 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8981 x 2.129 at 3.642 degrees (North through East) ! Clean map min=-0.070713 max=1.2486 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02236 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 1.00 KP 0.94 ! LA 0.94 MK 0.84 NL 1.14 OV 0.94 ! PT 1.07 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.03167 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 1.01 KP 0.90 ! LA 0.93 MK 0.83 NL 1.15 OV 0.92 ! PT 1.13 SC 0.91 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02559 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.90 KP 0.84 ! LA 0.94 MK 0.87 NL 1.16 OV 0.94 ! PT 1.18 SC 0.89 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.958656 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.96 KP 0.97 ! LA 0.94 MK 0.89 NL 1.20 OV 0.96 ! PT 1.26 SC 1.19 ! ! ! Fit before self-cal, rms=0.309667Jy sigma=4.411618 ! Fit after self-cal, rms=0.239079Jy sigma=3.218436 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239079Jy sigma=3.218436 ! Fit after self-cal, rms=0.239021Jy sigma=3.218184 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8396 mas, bmaj=2.093 mas, bpa=0.716 degrees ! Estimated noise=1.69298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0712056 Jy ! Component: 100 - total flux cleaned = 0.0731789 Jy ! Component: 150 - total flux cleaned = 0.0680346 Jy ! Component: 200 - total flux cleaned = 0.0664772 Jy ! Total flux subtracted in 200 components = 0.0664771 Jy ! Clean residual min=-0.041642 max=0.051191 Jy/beam ! Clean residual mean=0.000043 rms=0.010392 Jy/beam ! Combined flux in latest and established models = 2.3419 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 2.3419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200374Jy sigma=2.686995 ! Fit after self-cal, rms=0.200000Jy sigma=2.672635 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200000Jy sigma=2.672635 ! Fit after self-cal, rms=0.196522Jy sigma=2.628656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.4, -2.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329134 Jy ! Component: 100 - total flux cleaned = 0.0345518 Jy ! Component: 150 - total flux cleaned = 0.0369031 Jy ! Component: 200 - total flux cleaned = 0.0389642 Jy ! Total flux subtracted in 200 components = 0.0389642 Jy ! Clean residual min=-0.035905 max=0.033288 Jy/beam ! Clean residual mean=-0.000061 rms=0.007862 Jy/beam ! Combined flux in latest and established models = 2.38087 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 2.38087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175438Jy sigma=2.310724 ! Fit after self-cal, rms=0.174530Jy sigma=2.298732 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8396 x 2.093 at 0.716 degrees (North through East) ! Clean map min=-0.032755 max=1.2026 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174530Jy sigma=2.298732 ! Fit after self-cal, rms=0.143864Jy sigma=1.784746 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143864Jy sigma=1.784746 ! Fit after self-cal, rms=0.143778Jy sigma=1.784184 ! Inverting map and beam ! Estimated beam: bmin=0.8303 mas, bmaj=2.098 mas, bpa=-0.1018 degrees ! Estimated noise=1.66863 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613714 Jy ! Component: 100 - total flux cleaned = 0.0106409 Jy ! Component: 150 - total flux cleaned = 0.0129572 Jy ! Component: 200 - total flux cleaned = 0.0142985 Jy ! Total flux subtracted in 200 components = 0.0142985 Jy ! Clean residual min=-0.030826 max=0.025119 Jy/beam ! Clean residual mean=-0.000084 rms=0.006179 Jy/beam ! Combined flux in latest and established models = 2.39516 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 2.39516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133837Jy sigma=1.634579 ! Fit after self-cal, rms=0.133852Jy sigma=1.630583 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133852Jy sigma=1.630583 ! Fit after self-cal, rms=0.129131Jy sigma=1.595730 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129131Jy sigma=1.595730 ! Fit after self-cal, rms=0.129130Jy sigma=1.595715 ! Inverting map and beam ! Estimated beam: bmin=0.8272 mas, bmaj=2.096 mas, bpa=-0.2727 degrees ! Estimated noise=1.65902 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00298438 Jy ! Component: 100 - total flux cleaned = -0.00234509 Jy ! Component: 150 - total flux cleaned = -0.00177644 Jy ! Component: 200 - total flux cleaned = -0.00125193 Jy ! Total flux subtracted in 200 components = -0.00125193 Jy ! Clean residual min=-0.027825 max=0.024248 Jy/beam ! Clean residual mean=-0.000088 rms=0.005665 Jy/beam ! Combined flux in latest and established models = 2.39391 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 85 components and 2.39391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122869Jy sigma=1.517293 ! Fit after self-cal, rms=0.122861Jy sigma=1.514309 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.191 mas, bmaj=4.55 mas, bpa=16.55 degrees ! Estimated noise=2.20581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349457 Jy ! Component: 100 - total flux cleaned = 0.00401554 Jy ! Component: 150 - total flux cleaned = 0.00443923 Jy ! Component: 200 - total flux cleaned = 0.00479387 Jy ! Total flux subtracted in 200 components = 0.00479387 Jy ! Clean residual min=-0.021409 max=0.025291 Jy/beam ! Clean residual mean=-0.000221 rms=0.006144 Jy/beam ! Combined flux in latest and established models = 2.39871 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 2.39871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120446Jy sigma=1.494992 ! Fit after self-cal, rms=0.120300Jy sigma=1.488621 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7265 mas, bmaj=1.809 mas, bpa=2.565 degrees ! Estimated noise=2.26724 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.26595 Jy ! Component: 100 - total flux cleaned = 1.80763 Jy ! Component: 150 - total flux cleaned = 2.07579 Jy ! Component: 200 - total flux cleaned = 2.21572 Jy ! Total flux subtracted in 200 components = 2.21572 Jy ! Clean residual min=-0.070147 max=0.073244 Jy/beam ! Clean residual mean=0.000156 rms=0.017040 Jy/beam ! Combined flux in latest and established models = 2.21573 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 2.21573 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8272 mas, bmaj=2.096 mas, bpa=-0.2727 degrees ! Estimated noise=1.65902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 3.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0874479 Jy ! Component: 100 - total flux cleaned = 0.112825 Jy ! Component: 150 - total flux cleaned = 0.128287 Jy ! Component: 200 - total flux cleaned = 0.13502 Jy ! Total flux subtracted in 200 components = 0.13502 Jy ! Clean residual min=-0.034793 max=0.029681 Jy/beam ! Clean residual mean=0.000022 rms=0.008134 Jy/beam ! Combined flux in latest and established models = 2.35074 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 50 components and 2.35074 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.191 mas, bmaj=4.55 mas, bpa=16.55 degrees ! Estimated noise=2.20581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.02984 Jy ! Component: 100 - total flux cleaned = 0.0343274 Jy ! Component: 150 - total flux cleaned = 0.0372634 Jy ! Component: 200 - total flux cleaned = 0.0387875 Jy ! Total flux subtracted in 200 components = 0.0387875 Jy ! Clean residual min=-0.018312 max=0.019806 Jy/beam ! Clean residual mean=-0.000183 rms=0.005841 Jy/beam ! Combined flux in latest and established models = 2.38953 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 79 components and 2.38953 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8272 mas, bmaj=2.096 mas, bpa=-0.2727 degrees ! Estimated noise=1.65902 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0155919 Jy ! Component: 100 - total flux cleaned = -0.0155436 Jy ! Component: 150 - total flux cleaned = -0.0144766 Jy ! Component: 200 - total flux cleaned = -0.0155304 Jy ! Total flux subtracted in 200 components = -0.0155304 Jy ! Clean residual min=-0.028890 max=0.021792 Jy/beam ! Clean residual mean=-0.000033 rms=0.006087 Jy/beam ! Combined flux in latest and established models = 2.374 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 2.374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122613Jy sigma=1.600600 ! Fit after self-cal, rms=0.121103Jy sigma=1.582632 wmodel J2246-1206_X_2005_07_20_yyk\_map.mod ! Writing 89 model components to file: J2246-1206_X_2005_07_20_yyk_map.mod wobs J2246-1206_X_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J2246-1206_X_2005_07_20_yyk_uvs.fits wwins J2246-1206_X_2005_07_20_yyk\_map.win ! wwins: Wrote 4 windows to J2246-1206_X_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0123487 Jy ! Component: 100 - total flux cleaned = -0.0161337 Jy ! Component: 150 - total flux cleaned = -0.017603 Jy ! Component: 200 - total flux cleaned = -0.0193563 Jy ! Component: 250 - total flux cleaned = -0.0203441 Jy ! Component: 300 - total flux cleaned = -0.0209691 Jy ! Component: 350 - total flux cleaned = -0.022463 Jy ! Component: 400 - total flux cleaned = -0.0224696 Jy ! Component: 450 - total flux cleaned = -0.0224804 Jy ! Component: 500 - total flux cleaned = -0.0230205 Jy ! Component: 550 - total flux cleaned = -0.0232803 Jy ! Component: 600 - total flux cleaned = -0.0235247 Jy ! Component: 650 - total flux cleaned = -0.0235175 Jy ! Component: 700 - total flux cleaned = -0.0232864 Jy ! Component: 750 - total flux cleaned = -0.0237343 Jy ! Component: 800 - total flux cleaned = -0.0232979 Jy ! Component: 850 - total flux cleaned = -0.0230838 Jy ! Component: 900 - total flux cleaned = -0.0230786 Jy ! Component: 950 - total flux cleaned = -0.0222848 Jy ! Component: 1000 - total flux cleaned = -0.0224837 Jy ! Component: 1050 - total flux cleaned = -0.0224876 Jy ! Component: 1100 - total flux cleaned = -0.0221246 Jy ! Component: 1150 - total flux cleaned = -0.0224876 Jy ! Component: 1200 - total flux cleaned = -0.0224828 Jy ! Component: 1250 - total flux cleaned = -0.0219694 Jy ! Component: 1300 - total flux cleaned = -0.022303 Jy ! Component: 1350 - total flux cleaned = -0.0221402 Jy ! Component: 1400 - total flux cleaned = -0.0219796 Jy ! Component: 1450 - total flux cleaned = -0.0222915 Jy ! Component: 1500 - total flux cleaned = -0.022292 Jy ! Component: 1550 - total flux cleaned = -0.0224425 Jy ! Component: 1600 - total flux cleaned = -0.022446 Jy ! Component: 1650 - total flux cleaned = -0.0231626 Jy ! Component: 1700 - total flux cleaned = -0.0233055 Jy ! Component: 1750 - total flux cleaned = -0.0234473 Jy ! Component: 1800 - total flux cleaned = -0.0241206 Jy ! Component: 1850 - total flux cleaned = -0.0246433 Jy ! Component: 1900 - total flux cleaned = -0.0248981 Jy ! Component: 1950 - total flux cleaned = -0.0254025 Jy ! Component: 2000 - total flux cleaned = -0.0255243 Jy ! Total flux subtracted in 2048 components = -0.0260117 Jy ! Clean residual min=-0.006132 max=0.006209 Jy/beam ! Clean residual mean=0.000029 rms=0.002158 Jy/beam ! Combined flux in latest and established models = 2.34799 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 210 components and 2.34799 Jy ![Exited script file: muppet] wmap "J2246-1206_X_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8272 x 2.096 at -0.2727 degrees (North through East) ! Clean map min=-0.029185 max=1.1512 Jy/beam ! Writing clean map to FITS file: J2246-1206_X_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.15124 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00213534 device "J2246-1206_X_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J2246-1206_X_2005_07_20_yyk_map.eps/VPS' loglevs 4*100*3*image_rms/peak_flux ! The new contour levels are: ! -2.22579 2.22579 4.45158 8.90316 17.8063 35.6127 71.2253 print "clev=",int(4*3*image_rms*10000)/10000 ! clev= 0.0256 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.151 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8272 x 2.096 at -0.2727 degrees (North through East) ! Clean map min=-0.029185 max=1.1512 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2246-1206_X_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J2246-1206_X_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2246-1206_X_2005_07_20_yyk_uvs.log closed on Fri Jan 20 11:27:27 2006