! Started logfile: J2246-1206_S_2005_07_20_yyk_uvs.log on Fri Jan 20 11:08:32 2006 obs J2246-1206_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J2246-1206_S_2005_07_20_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2246-1206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1526 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2246-1206_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.09802 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=6.764 mas, bpa=4.881 degrees ! Estimated noise=2.51051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.74069 Jy ! Component: 100 - total flux cleaned = 2.10559 Jy ! Total flux subtracted in 100 components = 2.10559 Jy ! Clean residual min=-0.054913 max=0.100548 Jy/beam ! Clean residual mean=0.001788 rms=0.020809 Jy/beam ! Combined flux in latest and established models = 2.10559 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 2.10559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.284946Jy sigma=4.199942 ! Fit after self-cal, rms=0.282608Jy sigma=4.153425 ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=6.764 mas, bpa=4.881 degrees ! Estimated noise=2.51051 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=8.052 mas, bpa=0.2682 degrees ! Estimated noise=1.7905 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.163556 Jy ! Component: 100 - total flux cleaned = 0.22007 Jy ! Component: 150 - total flux cleaned = 0.231108 Jy ! Component: 200 - total flux cleaned = 0.230362 Jy ! Total flux subtracted in 200 components = 0.230362 Jy ! Clean residual min=-0.047444 max=0.066290 Jy/beam ! Clean residual mean=-0.000673 rms=0.013729 Jy/beam ! Combined flux in latest and established models = 2.33595 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 2.33595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217760Jy sigma=3.097016 ! Fit after self-cal, rms=0.217405Jy sigma=3.093597 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 8.052 at 0.2682 degrees (North through East) ! Clean map min=-0.046139 max=2.0097 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01048 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 1.05 KP 0.95 ! LA 1.05 MK 0.89 NL 1.09 OV 0.97 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.986597 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.08 KP 0.98 ! LA 1.01 MK 0.97 NL 1.07 OV 0.99 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.969989 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.06 KP 0.97 ! LA 0.93 MK 1.09 NL 1.17 OV 1.01 ! PT 1.08 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01931 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.94 KP 0.89 ! LA 1.00* MK 1.07 NL 1.02 OV 0.85 ! PT 0.97 SC 1.13 ! ! ! Fit before self-cal, rms=0.217405Jy sigma=3.093597 ! Fit after self-cal, rms=0.133647Jy sigma=1.833418 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133647Jy sigma=1.833418 ! Fit after self-cal, rms=0.133800Jy sigma=1.833178 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=8.148 mas, bpa=0.0003549 degrees ! Estimated noise=1.76634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, 6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151981 Jy ! Component: 100 - total flux cleaned = 0.0190623 Jy ! Component: 150 - total flux cleaned = 0.0197496 Jy ! Component: 200 - total flux cleaned = 0.0183108 Jy ! Total flux subtracted in 200 components = 0.0183108 Jy ! Clean residual min=-0.011022 max=0.013128 Jy/beam ! Clean residual mean=-0.000122 rms=0.003345 Jy/beam ! Combined flux in latest and established models = 2.35426 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 75 components and 2.35426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122894Jy sigma=1.657575 ! Fit after self-cal, rms=0.122057Jy sigma=1.650418 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122057Jy sigma=1.650418 ! Fit after self-cal, rms=0.119766Jy sigma=1.618320 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408348 Jy ! Component: 100 - total flux cleaned = 0.00380217 Jy ! Component: 150 - total flux cleaned = 0.00353431 Jy ! Component: 200 - total flux cleaned = 0.00307378 Jy ! Total flux subtracted in 200 components = 0.00307378 Jy ! Clean residual min=-0.010070 max=0.012079 Jy/beam ! Clean residual mean=-0.000147 rms=0.003007 Jy/beam ! Combined flux in latest and established models = 2.35734 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 2.35734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119080Jy sigma=1.597918 ! Fit after self-cal, rms=0.118646Jy sigma=1.594073 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 8.148 at 0.0003549 degrees (North through East) ! Clean map min=-0.010202 max=1.9945 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118646Jy sigma=1.594073 ! Fit after self-cal, rms=0.084768Jy sigma=1.030086 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084768Jy sigma=1.030086 ! Fit after self-cal, rms=0.084746Jy sigma=1.029766 ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=8.145 mas, bpa=-0.1201 degrees ! Estimated noise=1.76422 mJy/beam. ! Added new window around map position (54, -25.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145938 Jy ! Component: 100 - total flux cleaned = 0.018642 Jy ! Component: 150 - total flux cleaned = 0.0204135 Jy ! Component: 200 - total flux cleaned = 0.0207874 Jy ! Total flux subtracted in 200 components = 0.0207874 Jy ! Clean residual min=-0.006098 max=0.007030 Jy/beam ! Clean residual mean=0.000025 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 2.37812 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 2.37813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081761Jy sigma=0.991064 ! Fit after self-cal, rms=0.081478Jy sigma=0.989021 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081478Jy sigma=0.989021 ! Fit after self-cal, rms=0.078638Jy sigma=0.961870 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078638Jy sigma=0.961870 ! Fit after self-cal, rms=0.078633Jy sigma=0.961864 ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=8.138 mas, bpa=-0.1969 degrees ! Estimated noise=1.76404 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675114 Jy ! Component: 100 - total flux cleaned = 0.0072627 Jy ! Component: 150 - total flux cleaned = 0.00740364 Jy ! Component: 200 - total flux cleaned = 0.0076667 Jy ! Total flux subtracted in 200 components = 0.0076667 Jy ! Clean residual min=-0.005244 max=0.006249 Jy/beam ! Clean residual mean=0.000005 rms=0.001549 Jy/beam ! Combined flux in latest and established models = 2.38579 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 143 components and 2.38579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077727Jy sigma=0.949968 ! Fit after self-cal, rms=0.077597Jy sigma=0.949109 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.869 mas, bmaj=16.03 mas, bpa=14.88 degrees ! Estimated noise=2.20686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441317 Jy ! Component: 100 - total flux cleaned = 0.000901267 Jy ! Component: 150 - total flux cleaned = 0.000662974 Jy ! Component: 200 - total flux cleaned = 0.000460458 Jy ! Total flux subtracted in 200 components = 0.000460458 Jy ! Clean residual min=-0.005744 max=0.005639 Jy/beam ! Clean residual mean=-0.000012 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 2.38625 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 156 components and 2.38625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077569Jy sigma=0.946983 ! Fit after self-cal, rms=0.077497Jy sigma=0.946365 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=6.796 mas, bpa=4.682 degrees ! Estimated noise=2.47484 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.7175 Jy ! Component: 100 - total flux cleaned = 2.0777 Jy ! Component: 150 - total flux cleaned = 2.20781 Jy ! Component: 200 - total flux cleaned = 2.27423 Jy ! Total flux subtracted in 200 components = 2.27423 Jy ! Clean residual min=-0.016794 max=0.025047 Jy/beam ! Clean residual mean=0.001014 rms=0.005592 Jy/beam ! Combined flux in latest and established models = 2.27423 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 2.27423 Jy ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=8.138 mas, bpa=-0.1969 degrees ! Estimated noise=1.76404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479198 Jy ! Component: 100 - total flux cleaned = 0.0725345 Jy ! Component: 150 - total flux cleaned = 0.0881723 Jy ! Component: 200 - total flux cleaned = 0.0984264 Jy ! Total flux subtracted in 200 components = 0.0984264 Jy ! Clean residual min=-0.007190 max=0.007518 Jy/beam ! Clean residual mean=0.000147 rms=0.002167 Jy/beam ! Combined flux in latest and established models = 2.37266 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 86 components and 2.37266 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.869 mas, bmaj=16.03 mas, bpa=14.88 degrees ! Estimated noise=2.20686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00779047 Jy ! Component: 100 - total flux cleaned = 0.0101787 Jy ! Component: 150 - total flux cleaned = 0.0120259 Jy ! Component: 200 - total flux cleaned = 0.012628 Jy ! Total flux subtracted in 200 components = 0.012628 Jy ! Clean residual min=-0.006370 max=0.006856 Jy/beam ! Clean residual mean=0.000018 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 2.38529 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 115 components and 2.38529 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=8.138 mas, bpa=-0.1969 degrees ! Estimated noise=1.76404 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125805 Jy ! Component: 100 - total flux cleaned = -0.000563366 Jy ! Component: 150 - total flux cleaned = 2.09411e-05 Jy ! Component: 200 - total flux cleaned = 0.000360908 Jy ! Total flux subtracted in 200 components = 0.000360908 Jy ! Clean residual min=-0.006042 max=0.006278 Jy/beam ! Clean residual mean=0.000008 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 2.38565 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 144 components and 2.38565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078388Jy sigma=0.957565 ! Fit after self-cal, rms=0.078205Jy sigma=0.954555 wmodel J2246-1206_S_2005_07_20_yyk\_map.mod ! Writing 144 model components to file: J2246-1206_S_2005_07_20_yyk_map.mod wobs J2246-1206_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J2246-1206_S_2005_07_20_yyk_uvs.fits wwins J2246-1206_S_2005_07_20_yyk\_map.win ! wwins: Wrote 3 windows to J2246-1206_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000834902 Jy ! Component: 100 - total flux cleaned = -0.000929614 Jy ! Component: 150 - total flux cleaned = -0.000470416 Jy ! Component: 200 - total flux cleaned = 0.000307171 Jy ! Component: 250 - total flux cleaned = 0.00104122 Jy ! Component: 300 - total flux cleaned = 0.00173584 Jy ! Component: 350 - total flux cleaned = 0.00239947 Jy ! Component: 400 - total flux cleaned = 0.00310862 Jy ! Component: 450 - total flux cleaned = 0.00386427 Jy ! Component: 500 - total flux cleaned = 0.00446372 Jy ! Component: 550 - total flux cleaned = 0.0047851 Jy ! Component: 600 - total flux cleaned = 0.00497538 Jy ! Component: 650 - total flux cleaned = 0.00528251 Jy ! Component: 700 - total flux cleaned = 0.00546251 Jy ! Component: 750 - total flux cleaned = 0.00569546 Jy ! Component: 800 - total flux cleaned = 0.00580919 Jy ! Component: 850 - total flux cleaned = 0.00608553 Jy ! Component: 900 - total flux cleaned = 0.00613888 Jy ! Component: 950 - total flux cleaned = 0.00629832 Jy ! Component: 1000 - total flux cleaned = 0.00661145 Jy ! Component: 1050 - total flux cleaned = 0.00691856 Jy ! Component: 1100 - total flux cleaned = 0.00722192 Jy ! Component: 1150 - total flux cleaned = 0.00756951 Jy ! Component: 1200 - total flux cleaned = 0.00771559 Jy ! Component: 1250 - total flux cleaned = 0.00790906 Jy ! Component: 1300 - total flux cleaned = 0.00824208 Jy ! Component: 1350 - total flux cleaned = 0.00856949 Jy ! Component: 1400 - total flux cleaned = 0.0088008 Jy ! Component: 1450 - total flux cleaned = 0.00902883 Jy ! Component: 1500 - total flux cleaned = 0.00943438 Jy ! Component: 1550 - total flux cleaned = 0.00970141 Jy ! Component: 1600 - total flux cleaned = 0.010009 Jy ! Component: 1650 - total flux cleaned = 0.0102693 Jy ! Component: 1700 - total flux cleaned = 0.0106551 Jy ! Component: 1750 - total flux cleaned = 0.0111196 Jy ! Component: 1800 - total flux cleaned = 0.0112868 Jy ! Component: 1850 - total flux cleaned = 0.0116592 Jy ! Component: 1900 - total flux cleaned = 0.0120681 Jy ! Component: 1950 - total flux cleaned = 0.0124723 Jy ! Component: 2000 - total flux cleaned = 0.0127527 Jy ! Total flux subtracted in 2048 components = 0.013228 Jy ! Clean residual min=-0.002493 max=0.002367 Jy/beam ! Clean residual mean=-0.000021 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 2.39888 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 277 components and 2.39888 Jy ![Exited script file: muppet] wmap "J2246-1206_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.335 x 8.138 at -0.1969 degrees (North through East) ! Clean map min=-0.0057079 max=1.9768 Jy/beam ! Writing clean map to FITS file: J2246-1206_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.97681 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000808136 device "J2246-1206_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J2246-1206_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122642 0.122642 0.245285 0.49057 0.981139 1.96228 3.92456 7.84912 15.6982 31.3965 62.7929 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.976 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.335 x 8.138 at -0.1969 degrees (North through East) ! Clean map min=-0.0057079 max=1.9768 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2246-1206_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J2246-1206_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2246-1206_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 11:08:36 2006