! Started logfile: J2245-0755_S_2005_07_08_yyk_uvs.log on Fri Jan 20 11:08:23 2006 obs J2245-0755_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J2245-0755_S_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.933333 visibilities/baseline/integration-bin. ! Found source: J2245-0755 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2245-0755_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.143234 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=6.497 mas, bpa=-2.668 degrees ! Estimated noise=1.20741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102054 Jy ! Component: 100 - total flux cleaned = 0.116877 Jy ! Total flux subtracted in 100 components = 0.116877 Jy ! Clean residual min=-0.006058 max=0.006958 Jy/beam ! Clean residual mean=-0.000021 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 0.116877 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.116877 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.077052Jy sigma=1.106002 ! Fit after self-cal, rms=0.076962Jy sigma=1.100370 ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=6.497 mas, bpa=-2.668 degrees ! Estimated noise=1.20741 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=7.798 mas, bpa=-2.257 degrees ! Estimated noise=0.912217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00738581 Jy ! Component: 100 - total flux cleaned = 0.0108564 Jy ! Component: 150 - total flux cleaned = 0.0125093 Jy ! Component: 200 - total flux cleaned = 0.0127563 Jy ! Total flux subtracted in 200 components = 0.0127563 Jy ! Clean residual min=-0.004494 max=0.004861 Jy/beam ! Clean residual mean=-0.000028 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.129633 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 37 components and 0.129633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076263Jy sigma=1.088921 ! Fit after self-cal, rms=0.076244Jy sigma=1.088821 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.138 x 7.798 at -2.257 degrees (North through East) ! Clean map min=-0.0042062 max=0.11701 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00928 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.00 KP 0.96 ! LA 1.07 MK 1.01 NL 0.96 OV 0.98 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.076244Jy sigma=1.088821 ! Fit after self-cal, rms=0.076038Jy sigma=1.087334 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076038Jy sigma=1.087334 ! Fit after self-cal, rms=0.076037Jy sigma=1.087331 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.738 mas, bpa=-1.86 degrees ! Estimated noise=0.912854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122315 Jy ! Component: 100 - total flux cleaned = 0.00135646 Jy ! Component: 150 - total flux cleaned = 0.001438 Jy ! Component: 200 - total flux cleaned = 0.00151592 Jy ! Total flux subtracted in 200 components = 0.00151592 Jy ! Clean residual min=-0.004348 max=0.004883 Jy/beam ! Clean residual mean=-0.000013 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.131149 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.131149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075977Jy sigma=1.086407 ! Fit after self-cal, rms=0.075966Jy sigma=1.086351 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075966Jy sigma=1.086351 ! Fit after self-cal, rms=0.071060Jy sigma=1.025235 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155934 Jy ! Component: 100 - total flux cleaned = 0.00168299 Jy ! Component: 150 - total flux cleaned = 0.00171908 Jy ! Component: 200 - total flux cleaned = 0.00171745 Jy ! Total flux subtracted in 200 components = 0.00171745 Jy ! Clean residual min=-0.004071 max=0.004601 Jy/beam ! Clean residual mean=-0.000022 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.132867 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.132867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070982Jy sigma=1.024293 ! Fit after self-cal, rms=0.070661Jy sigma=1.019408 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 7.738 at -1.86 degrees (North through East) ! Clean map min=-0.0038777 max=0.11794 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070661Jy sigma=1.019408 ! Fit after self-cal, rms=0.069610Jy sigma=1.009709 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069610Jy sigma=1.009709 ! Fit after self-cal, rms=0.069626Jy sigma=1.009021 ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=7.659 mas, bpa=-1.561 degrees ! Estimated noise=0.904674 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470147 Jy ! Component: 100 - total flux cleaned = 0.000651369 Jy ! Component: 150 - total flux cleaned = 0.000742187 Jy ! Component: 200 - total flux cleaned = 0.000798206 Jy ! Total flux subtracted in 200 components = 0.000798206 Jy ! Clean residual min=-0.003814 max=0.004285 Jy/beam ! Clean residual mean=-0.000017 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.133665 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.133665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069603Jy sigma=1.008419 ! Fit after self-cal, rms=0.069623Jy sigma=1.008260 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069623Jy sigma=1.008260 ! Fit after self-cal, rms=0.069293Jy sigma=0.999814 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069293Jy sigma=0.999814 ! Fit after self-cal, rms=0.069306Jy sigma=0.999728 ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=7.544 mas, bpa=-1.628 degrees ! Estimated noise=0.90393 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195299 Jy ! Component: 100 - total flux cleaned = 0.00228009 Jy ! Component: 150 - total flux cleaned = 0.00262112 Jy ! Component: 200 - total flux cleaned = 0.00286679 Jy ! Total flux subtracted in 200 components = 0.00286679 Jy ! Clean residual min=-0.003866 max=0.004222 Jy/beam ! Clean residual mean=-0.000007 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.136532 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.136532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069206Jy sigma=0.998505 ! Fit after self-cal, rms=0.069209Jy sigma=0.998459 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.727 mas, bmaj=13.82 mas, bpa=7.17 degrees ! Estimated noise=1.17555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011973 Jy ! Component: 100 - total flux cleaned = 0.00136369 Jy ! Component: 150 - total flux cleaned = 0.00146853 Jy ! Component: 200 - total flux cleaned = 0.00158569 Jy ! Total flux subtracted in 200 components = 0.00158569 Jy ! Clean residual min=-0.003841 max=0.004191 Jy/beam ! Clean residual mean=-0.000027 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.138117 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.138117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069224Jy sigma=0.998582 ! Fit after self-cal, rms=0.069214Jy sigma=0.998452 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.423 mas, bpa=-2.409 degrees ! Estimated noise=1.17684 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102129 Jy ! Component: 100 - total flux cleaned = 0.118328 Jy ! Component: 150 - total flux cleaned = 0.126093 Jy ! Component: 200 - total flux cleaned = 0.130748 Jy ! Total flux subtracted in 200 components = 0.130748 Jy ! Clean residual min=-0.004481 max=0.005104 Jy/beam ! Clean residual mean=-0.000009 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.130748 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.130748 Jy ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=7.544 mas, bpa=-1.628 degrees ! Estimated noise=0.90393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, -39.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501766 Jy ! Component: 100 - total flux cleaned = 0.00596484 Jy ! Component: 150 - total flux cleaned = 0.00634181 Jy ! Component: 200 - total flux cleaned = 0.00646205 Jy ! Total flux subtracted in 200 components = 0.00646205 Jy ! Clean residual min=-0.003327 max=0.003952 Jy/beam ! Clean residual mean=-0.000013 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.13721 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 57 components and 0.13721 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.727 mas, bmaj=13.82 mas, bpa=7.17 degrees ! Estimated noise=1.17555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127528 Jy ! Component: 100 - total flux cleaned = 0.00148172 Jy ! Component: 150 - total flux cleaned = 0.00148181 Jy ! Component: 200 - total flux cleaned = 0.00151456 Jy ! Total flux subtracted in 200 components = 0.00151456 Jy ! Clean residual min=-0.003350 max=0.004076 Jy/beam ! Clean residual mean=-0.000035 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.138725 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.138725 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=7.544 mas, bpa=-1.628 degrees ! Estimated noise=0.90393 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000713133 Jy ! Component: 100 - total flux cleaned = -0.000755621 Jy ! Component: 150 - total flux cleaned = -0.000753101 Jy ! Component: 200 - total flux cleaned = -0.00075109 Jy ! Total flux subtracted in 200 components = -0.00075109 Jy ! Clean residual min=-0.003258 max=0.004032 Jy/beam ! Clean residual mean=-0.000015 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.137974 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.137974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068975Jy sigma=0.993212 ! Fit after self-cal, rms=0.068947Jy sigma=0.992312 wmodel J2245-0755_S_2005_07_08_yyk\_map.mod ! Writing 91 model components to file: J2245-0755_S_2005_07_08_yyk_map.mod wobs J2245-0755_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J2245-0755_S_2005_07_08_yyk_uvs.fits wwins J2245-0755_S_2005_07_08_yyk\_map.win ! wwins: Wrote 2 windows to J2245-0755_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000905968 Jy ! Component: 100 - total flux cleaned = 0.000963206 Jy ! Component: 150 - total flux cleaned = 0.00101637 Jy ! Component: 200 - total flux cleaned = 0.0010673 Jy ! Component: 250 - total flux cleaned = 0.00130975 Jy ! Component: 300 - total flux cleaned = 0.00154379 Jy ! Component: 350 - total flux cleaned = 0.00181432 Jy ! Component: 400 - total flux cleaned = 0.00229026 Jy ! Component: 450 - total flux cleaned = 0.00266609 Jy ! Component: 500 - total flux cleaned = 0.00290927 Jy ! Component: 550 - total flux cleaned = 0.00314631 Jy ! Component: 600 - total flux cleaned = 0.00345479 Jy ! Component: 650 - total flux cleaned = 0.00368026 Jy ! Component: 700 - total flux cleaned = 0.00375391 Jy ! Component: 750 - total flux cleaned = 0.00393492 Jy ! Component: 800 - total flux cleaned = 0.00397118 Jy ! Component: 850 - total flux cleaned = 0.00414514 Jy ! Component: 900 - total flux cleaned = 0.00428177 Jy ! Component: 950 - total flux cleaned = 0.00441645 Jy ! Component: 1000 - total flux cleaned = 0.00458173 Jy ! Component: 1050 - total flux cleaned = 0.00464622 Jy ! Component: 1100 - total flux cleaned = 0.00474216 Jy ! Component: 1150 - total flux cleaned = 0.00483699 Jy ! Component: 1200 - total flux cleaned = 0.00496032 Jy ! Component: 1250 - total flux cleaned = 0.00505087 Jy ! Component: 1300 - total flux cleaned = 0.0049906 Jy ! Component: 1350 - total flux cleaned = 0.00499083 Jy ! Component: 1400 - total flux cleaned = 0.00496197 Jy ! Component: 1450 - total flux cleaned = 0.00499108 Jy ! Component: 1500 - total flux cleaned = 0.00504739 Jy ! Component: 1550 - total flux cleaned = 0.00510281 Jy ! Component: 1600 - total flux cleaned = 0.00507458 Jy ! Component: 1650 - total flux cleaned = 0.00515675 Jy ! Component: 1700 - total flux cleaned = 0.00526438 Jy ! Component: 1750 - total flux cleaned = 0.00534401 Jy ! Component: 1800 - total flux cleaned = 0.00537043 Jy ! Component: 1850 - total flux cleaned = 0.00550049 Jy ! Component: 1900 - total flux cleaned = 0.00552617 Jy ! Component: 1950 - total flux cleaned = 0.00562766 Jy ! Component: 2000 - total flux cleaned = 0.00567732 Jy ! Total flux subtracted in 2048 components = 0.00580146 Jy ! Clean residual min=-0.001436 max=0.001312 Jy/beam ! Clean residual mean=0.000003 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.143775 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 223 components and 0.143775 Jy ![Exited script file: muppet] wmap "J2245-0755_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 7.544 at -1.628 degrees (North through East) ! Clean map min=-0.0024484 max=0.11693 Jy/beam ! Writing clean map to FITS file: J2245-0755_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116927 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000497812 device "J2245-0755_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J2245-0755_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27724 1.27724 2.55448 5.10895 10.2179 20.4358 40.8716 81.7432 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 7.544 at -1.628 degrees (North through East) ! Clean map min=-0.0024484 max=0.11693 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2245-0755_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J2245-0755_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2245-0755_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 11:08:27 2006