! Started logfile: J2124-1438_X_2005_07_09_yyk_uvs.log on Fri Jan 20 11:02:22 2006 obs J2124-1438_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J2124-1438_X_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.962222 visibilities/baseline/integration-bin. ! Found source: J2124-1438 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1480 lines of history. ! ! Reading 1732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2124-1438_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.12995 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7318 mas, bmaj=1.818 mas, bpa=1.786 degrees ! Estimated noise=1.46205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0839459 Jy ! Component: 100 - total flux cleaned = 0.106853 Jy ! Total flux subtracted in 100 components = 0.106853 Jy ! Clean residual min=-0.007336 max=0.010159 Jy/beam ! Clean residual mean=-0.000017 rms=0.001929 Jy/beam ! Combined flux in latest and established models = 0.106853 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.106853 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.080499Jy sigma=1.147461 ! Fit after self-cal, rms=0.077737Jy sigma=1.108483 ! Inverting map and beam ! Estimated beam: bmin=0.7318 mas, bmaj=1.818 mas, bpa=1.786 degrees ! Estimated noise=1.46205 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=2.421 mas, bpa=2.801 degrees ! Estimated noise=0.997028 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151693 Jy ! Component: 100 - total flux cleaned = 0.0197803 Jy ! Component: 150 - total flux cleaned = 0.0209971 Jy ! Component: 200 - total flux cleaned = 0.0210002 Jy ! Total flux subtracted in 200 components = 0.0210002 Jy ! Clean residual min=-0.006464 max=0.006735 Jy/beam ! Clean residual mean=-0.000022 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.127854 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.127854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076346Jy sigma=1.064642 ! Fit after self-cal, rms=0.076356Jy sigma=1.064560 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.013 x 2.421 at 2.801 degrees (North through East) ! Clean map min=-0.0060732 max=0.10009 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.970853 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.11 KP 0.96 ! LA 0.99 MK 1.00* NL 1.02 OV 1.08 ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.076356Jy sigma=1.064560 ! Fit after self-cal, rms=0.076368Jy sigma=1.062788 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076368Jy sigma=1.062788 ! Fit after self-cal, rms=0.076367Jy sigma=1.062779 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.417 mas, bpa=2.826 degrees ! Estimated noise=0.998173 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121077 Jy ! Component: 100 - total flux cleaned = 0.000121023 Jy ! Component: 150 - total flux cleaned = 0.000120743 Jy ! Component: 200 - total flux cleaned = 9.01406e-05 Jy ! Total flux subtracted in 200 components = 9.01406e-05 Jy ! Clean residual min=-0.006034 max=0.006678 Jy/beam ! Clean residual mean=-0.000019 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 0.127944 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.127944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076348Jy sigma=1.062212 ! Fit after self-cal, rms=0.076356Jy sigma=1.062197 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076356Jy sigma=1.062197 ! Fit after self-cal, rms=0.073047Jy sigma=0.999768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147655 Jy ! Component: 100 - total flux cleaned = 0.00130558 Jy ! Component: 150 - total flux cleaned = 0.00121744 Jy ! Component: 200 - total flux cleaned = 0.00109976 Jy ! Total flux subtracted in 200 components = 0.00109976 Jy ! Clean residual min=-0.005467 max=0.006062 Jy/beam ! Clean residual mean=-0.000015 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.129043 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.129043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072992Jy sigma=0.997840 ! Fit after self-cal, rms=0.072816Jy sigma=0.992311 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.014 x 2.417 at 2.826 degrees (North through East) ! Clean map min=-0.0051462 max=0.1036 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072816Jy sigma=0.992311 ! Fit after self-cal, rms=0.073386Jy sigma=0.989329 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073386Jy sigma=0.989329 ! Fit after self-cal, rms=0.073438Jy sigma=0.988600 ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=2.403 mas, bpa=2.794 degrees ! Estimated noise=1.00524 mJy/beam. ! Added new window around map position (1.8, 1.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00710189 Jy ! Component: 100 - total flux cleaned = 0.00822675 Jy ! Component: 150 - total flux cleaned = 0.00822878 Jy ! Component: 200 - total flux cleaned = 0.00814711 Jy ! Total flux subtracted in 200 components = 0.00814711 Jy ! Clean residual min=-0.005164 max=0.004246 Jy/beam ! Clean residual mean=-0.000011 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.137191 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 0.137191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072977Jy sigma=0.975978 ! Fit after self-cal, rms=0.072875Jy sigma=0.973905 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072875Jy sigma=0.973905 ! Fit after self-cal, rms=0.072526Jy sigma=0.972944 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072526Jy sigma=0.972944 ! Fit after self-cal, rms=0.072542Jy sigma=0.972919 ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=2.401 mas, bpa=2.779 degrees ! Estimated noise=1.0064 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256414 Jy ! Component: 100 - total flux cleaned = 0.00247883 Jy ! Component: 150 - total flux cleaned = 0.00240736 Jy ! Component: 200 - total flux cleaned = 0.00234833 Jy ! Total flux subtracted in 200 components = 0.00234833 Jy ! Clean residual min=-0.005221 max=0.004040 Jy/beam ! Clean residual mean=-0.000009 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.139539 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.139539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072432Jy sigma=0.969796 ! Fit after self-cal, rms=0.072392Jy sigma=0.969372 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=4.702 mas, bpa=6.823 degrees ! Estimated noise=1.21763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000873665 Jy ! Component: 100 - total flux cleaned = 0.000584583 Jy ! Component: 150 - total flux cleaned = 0.000459463 Jy ! Component: 200 - total flux cleaned = 0.000386468 Jy ! Total flux subtracted in 200 components = 0.000386468 Jy ! Clean residual min=-0.005131 max=0.004870 Jy/beam ! Clean residual mean=-0.000016 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.139925 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.139925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072361Jy sigma=0.968910 ! Fit after self-cal, rms=0.072316Jy sigma=0.968727 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7303 mas, bmaj=1.812 mas, bpa=1.786 degrees ! Estimated noise=1.47368 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0884024 Jy ! Component: 100 - total flux cleaned = 0.11193 Jy ! Component: 150 - total flux cleaned = 0.122904 Jy ! Component: 200 - total flux cleaned = 0.129954 Jy ! Total flux subtracted in 200 components = 0.129954 Jy ! Clean residual min=-0.005977 max=0.005219 Jy/beam ! Clean residual mean=-0.000001 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.129954 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.129954 Jy ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=2.401 mas, bpa=2.779 degrees ! Estimated noise=1.0064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679168 Jy ! Component: 100 - total flux cleaned = 0.00890265 Jy ! Component: 150 - total flux cleaned = 0.00948597 Jy ! Component: 200 - total flux cleaned = 0.0099545 Jy ! Total flux subtracted in 200 components = 0.0099545 Jy ! Clean residual min=-0.005380 max=0.003906 Jy/beam ! Clean residual mean=-0.000011 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.139909 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 50 components and 0.139909 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=4.702 mas, bpa=6.823 degrees ! Estimated noise=1.21763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117686 Jy ! Component: 100 - total flux cleaned = 0.00117733 Jy ! Component: 150 - total flux cleaned = 0.000999792 Jy ! Component: 200 - total flux cleaned = 0.000894181 Jy ! Total flux subtracted in 200 components = 0.000894181 Jy ! Clean residual min=-0.005214 max=0.004851 Jy/beam ! Clean residual mean=-0.000017 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.140803 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.140803 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=2.401 mas, bpa=2.779 degrees ! Estimated noise=1.0064 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252663 Jy ! Component: 100 - total flux cleaned = -0.000188135 Jy ! Component: 150 - total flux cleaned = -0.000296869 Jy ! Component: 200 - total flux cleaned = -0.000397225 Jy ! Total flux subtracted in 200 components = -0.000397225 Jy ! Clean residual min=-0.005279 max=0.003784 Jy/beam ! Clean residual mean=-0.000009 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.140406 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.140406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072333Jy sigma=0.969491 ! Fit after self-cal, rms=0.072306Jy sigma=0.969143 wmodel J2124-1438_X_2005_07_09_yyk\_map.mod ! Writing 81 model components to file: J2124-1438_X_2005_07_09_yyk_map.mod wobs J2124-1438_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J2124-1438_X_2005_07_09_yyk_uvs.fits wwins J2124-1438_X_2005_07_09_yyk\_map.win ! wwins: Wrote 2 windows to J2124-1438_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00216331 Jy ! Component: 100 - total flux cleaned = -0.00217122 Jy ! Component: 150 - total flux cleaned = -0.00191229 Jy ! Component: 200 - total flux cleaned = -0.00179435 Jy ! Component: 250 - total flux cleaned = -0.0016202 Jy ! Component: 300 - total flux cleaned = -0.00156464 Jy ! Component: 350 - total flux cleaned = -0.00151238 Jy ! Component: 400 - total flux cleaned = -0.00151321 Jy ! Component: 450 - total flux cleaned = -0.00136104 Jy ! Component: 500 - total flux cleaned = -0.0015108 Jy ! Component: 550 - total flux cleaned = -0.00146265 Jy ! Component: 600 - total flux cleaned = -0.00146454 Jy ! Component: 650 - total flux cleaned = -0.00165083 Jy ! Component: 700 - total flux cleaned = -0.00165068 Jy ! Component: 750 - total flux cleaned = -0.00169582 Jy ! Component: 800 - total flux cleaned = -0.00173958 Jy ! Component: 850 - total flux cleaned = -0.00169642 Jy ! Component: 900 - total flux cleaned = -0.00152914 Jy ! Component: 950 - total flux cleaned = -0.00157064 Jy ! Component: 1000 - total flux cleaned = -0.00144911 Jy ! Component: 1050 - total flux cleaned = -0.00133028 Jy ! Component: 1100 - total flux cleaned = -0.00129153 Jy ! Component: 1150 - total flux cleaned = -0.0012536 Jy ! Component: 1200 - total flux cleaned = -0.00129105 Jy ! Component: 1250 - total flux cleaned = -0.00121616 Jy ! Component: 1300 - total flux cleaned = -0.00128944 Jy ! Component: 1350 - total flux cleaned = -0.00132563 Jy ! Component: 1400 - total flux cleaned = -0.0012898 Jy ! Component: 1450 - total flux cleaned = -0.00118388 Jy ! Component: 1500 - total flux cleaned = -0.00121952 Jy ! Component: 1550 - total flux cleaned = -0.00132236 Jy ! Component: 1600 - total flux cleaned = -0.00125381 Jy ! Component: 1650 - total flux cleaned = -0.00135524 Jy ! Component: 1700 - total flux cleaned = -0.00142222 Jy ! Component: 1750 - total flux cleaned = -0.00142216 Jy ! Component: 1800 - total flux cleaned = -0.00148774 Jy ! Component: 1850 - total flux cleaned = -0.00152017 Jy ! Component: 1900 - total flux cleaned = -0.00152023 Jy ! Component: 1950 - total flux cleaned = -0.00155186 Jy ! Component: 2000 - total flux cleaned = -0.001552 Jy ! Total flux subtracted in 2048 components = -0.00158335 Jy ! Clean residual min=-0.001660 max=0.001866 Jy/beam ! Clean residual mean=0.000013 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.138822 Jy keep ! Adding 148 model components to the UV plane model. ! The established model now contains 229 components and 0.138822 Jy ![Exited script file: muppet] wmap "J2124-1438_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.008 x 2.401 at 2.779 degrees (North through East) ! Clean map min=-0.0033579 max=0.10221 Jy/beam ! Writing clean map to FITS file: J2124-1438_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102212 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000588891 device "J2124-1438_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J2124-1438_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.72844 1.72844 3.45687 6.91375 13.8275 27.655 55.31 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.008 x 2.401 at 2.779 degrees (North through East) ! Clean map min=-0.0033579 max=0.10221 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2124-1438_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J2124-1438_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2124-1438_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 11:02:26 2006