! Started logfile: J2120-0330_X_2005_07_09_yyk_uvs.log on Fri Jan 20 11:02:13 2006 obs J2120-0330_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J2120-0330_X_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2120-0330 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1479 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2120-0330_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.124303 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7074 mas, bmaj=1.836 mas, bpa=-2.311 degrees ! Estimated noise=1.17779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0861418 Jy ! Component: 100 - total flux cleaned = 0.103556 Jy ! Total flux subtracted in 100 components = 0.103556 Jy ! Clean residual min=-0.005854 max=0.007845 Jy/beam ! Clean residual mean=0.000003 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.103556 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.103556 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.070552Jy sigma=1.155247 ! Fit after self-cal, rms=0.070288Jy sigma=1.148825 ! Inverting map and beam ! Estimated beam: bmin=0.7074 mas, bmaj=1.836 mas, bpa=-2.311 degrees ! Estimated noise=1.17779 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8921 mas, bmaj=2.198 mas, bpa=-1.929 degrees ! Estimated noise=0.866566 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124804 Jy ! Component: 100 - total flux cleaned = 0.0171179 Jy ! Component: 150 - total flux cleaned = 0.0195326 Jy ! Component: 200 - total flux cleaned = 0.0208235 Jy ! Total flux subtracted in 200 components = 0.0208235 Jy ! Clean residual min=-0.004769 max=0.005610 Jy/beam ! Clean residual mean=0.000002 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.124379 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 0.124379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069587Jy sigma=1.115012 ! Fit after self-cal, rms=0.069588Jy sigma=1.114788 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8921 x 2.198 at -1.929 degrees (North through East) ! Clean map min=-0.0044987 max=0.10406 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0194 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.99 KP 0.92 ! LA 0.98 MK 0.91 NL 1.04 OV 1.04 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.03294 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.08 KP 0.92 ! LA 1.03 MK 0.98 NL 0.98 OV 0.90 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.99819 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.14 KP 0.84 ! LA 1.06 MK 1.07 NL 0.93 OV 1.10 ! PT 1.02 SC 0.88 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.069588Jy sigma=1.114788 ! Fit after self-cal, rms=0.069470Jy sigma=1.102504 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069470Jy sigma=1.102504 ! Fit after self-cal, rms=0.069463Jy sigma=1.102375 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.887 mas, bmaj=2.174 mas, bpa=-1.118 degrees ! Estimated noise=0.857455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.75513e-05 Jy ! Component: 100 - total flux cleaned = 0.000169151 Jy ! Component: 150 - total flux cleaned = 0.000323014 Jy ! Component: 200 - total flux cleaned = 0.000480151 Jy ! Total flux subtracted in 200 components = 0.000480151 Jy ! Clean residual min=-0.004474 max=0.004560 Jy/beam ! Clean residual mean=0.000004 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.12486 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.12486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069366Jy sigma=1.101636 ! Fit after self-cal, rms=0.069357Jy sigma=1.101518 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069357Jy sigma=1.101518 ! Fit after self-cal, rms=0.066487Jy sigma=1.053038 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000977477 Jy ! Component: 100 - total flux cleaned = 0.00103855 Jy ! Component: 150 - total flux cleaned = 0.0010636 Jy ! Component: 200 - total flux cleaned = 0.00106425 Jy ! Total flux subtracted in 200 components = 0.00106425 Jy ! Clean residual min=-0.004664 max=0.004179 Jy/beam ! Clean residual mean=0.000003 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.125924 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.125924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066489Jy sigma=1.052514 ! Fit after self-cal, rms=0.066204Jy sigma=1.047539 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.887 x 2.174 at -1.118 degrees (North through East) ! Clean map min=-0.0043678 max=0.10385 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066204Jy sigma=1.047539 ! Fit after self-cal, rms=0.064611Jy sigma=1.039072 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064611Jy sigma=1.039072 ! Fit after self-cal, rms=0.064608Jy sigma=1.038475 ! Inverting map and beam ! Estimated beam: bmin=0.8863 mas, bmaj=2.165 mas, bpa=-0.8 degrees ! Estimated noise=0.829698 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00275919 Jy ! Component: 100 - total flux cleaned = -0.00317012 Jy ! Component: 150 - total flux cleaned = -0.00316916 Jy ! Component: 200 - total flux cleaned = -0.00313096 Jy ! Total flux subtracted in 200 components = -0.00313096 Jy ! Clean residual min=-0.004238 max=0.003731 Jy/beam ! Clean residual mean=0.000001 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.122793 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.122793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064408Jy sigma=1.036426 ! Fit after self-cal, rms=0.064417Jy sigma=1.036328 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064417Jy sigma=1.036328 ! Fit after self-cal, rms=0.063008Jy sigma=1.033362 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063008Jy sigma=1.033362 ! Fit after self-cal, rms=0.063017Jy sigma=1.033273 ! Inverting map and beam ! Estimated beam: bmin=0.8744 mas, bmaj=2.158 mas, bpa=-1.389 degrees ! Estimated noise=0.810557 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177541 Jy ! Component: 100 - total flux cleaned = -0.00174538 Jy ! Component: 150 - total flux cleaned = -0.00170446 Jy ! Component: 200 - total flux cleaned = -0.00168662 Jy ! Total flux subtracted in 200 components = -0.00168662 Jy ! Clean residual min=-0.004287 max=0.003970 Jy/beam ! Clean residual mean=0.000003 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.121106 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.121106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062853Jy sigma=1.031854 ! Fit after self-cal, rms=0.062861Jy sigma=1.031819 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=3.75 mas, bpa=4.612 degrees ! Estimated noise=1.03551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124986 Jy ! Component: 100 - total flux cleaned = 0.0013497 Jy ! Component: 150 - total flux cleaned = 0.00145832 Jy ! Component: 200 - total flux cleaned = 0.00155002 Jy ! Total flux subtracted in 200 components = 0.00155002 Jy ! Clean residual min=-0.003970 max=0.003602 Jy/beam ! Clean residual mean=0.000004 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.122656 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.122656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062863Jy sigma=1.032196 ! Fit after self-cal, rms=0.062862Jy sigma=1.031939 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7035 mas, bmaj=1.83 mas, bpa=-2.109 degrees ! Estimated noise=1.10923 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829867 Jy ! Component: 100 - total flux cleaned = 0.100091 Jy ! Component: 150 - total flux cleaned = 0.107193 Jy ! Component: 200 - total flux cleaned = 0.111038 Jy ! Total flux subtracted in 200 components = 0.111038 Jy ! Clean residual min=-0.004917 max=0.005218 Jy/beam ! Clean residual mean=0.000003 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.111038 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.111038 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8744 mas, bmaj=2.158 mas, bpa=-1.389 degrees ! Estimated noise=0.810557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.2, 12.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621998 Jy ! Component: 100 - total flux cleaned = 0.007733 Jy ! Component: 150 - total flux cleaned = 0.00855692 Jy ! Component: 200 - total flux cleaned = 0.00924291 Jy ! Total flux subtracted in 200 components = 0.00924291 Jy ! Clean residual min=-0.004090 max=0.003187 Jy/beam ! Clean residual mean=0.000005 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.12028 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.12028 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=3.75 mas, bpa=4.612 degrees ! Estimated noise=1.03551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230406 Jy ! Component: 100 - total flux cleaned = 0.00236973 Jy ! Component: 150 - total flux cleaned = 0.00242017 Jy ! Component: 200 - total flux cleaned = 0.00246052 Jy ! Total flux subtracted in 200 components = 0.00246052 Jy ! Clean residual min=-0.004141 max=0.003358 Jy/beam ! Clean residual mean=0.000006 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.122741 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.122741 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8744 mas, bmaj=2.158 mas, bpa=-1.389 degrees ! Estimated noise=0.810557 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000474173 Jy ! Component: 100 - total flux cleaned = -0.000413219 Jy ! Component: 150 - total flux cleaned = -0.000359077 Jy ! Component: 200 - total flux cleaned = -0.000308129 Jy ! Total flux subtracted in 200 components = -0.000308129 Jy ! Clean residual min=-0.004003 max=0.002924 Jy/beam ! Clean residual mean=0.000003 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.122433 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.122433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062537Jy sigma=1.024629 ! Fit after self-cal, rms=0.062485Jy sigma=1.023706 wmodel J2120-0330_X_2005_07_09_yyk\_map.mod ! Writing 62 model components to file: J2120-0330_X_2005_07_09_yyk_map.mod wobs J2120-0330_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J2120-0330_X_2005_07_09_yyk_uvs.fits wwins J2120-0330_X_2005_07_09_yyk\_map.win ! wwins: Wrote 2 windows to J2120-0330_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162956 Jy ! Component: 100 - total flux cleaned = -0.00207565 Jy ! Component: 150 - total flux cleaned = -0.00212653 Jy ! Component: 200 - total flux cleaned = -0.00217499 Jy ! Component: 250 - total flux cleaned = -0.00193585 Jy ! Component: 300 - total flux cleaned = -0.00156671 Jy ! Component: 350 - total flux cleaned = -0.00129613 Jy ! Component: 400 - total flux cleaned = -0.00103226 Jy ! Component: 450 - total flux cleaned = -0.000859858 Jy ! Component: 500 - total flux cleaned = -0.000606715 Jy ! Component: 550 - total flux cleaned = -0.000482802 Jy ! Component: 600 - total flux cleaned = -0.000240971 Jy ! Component: 650 - total flux cleaned = -0.000280909 Jy ! Component: 700 - total flux cleaned = -0.000126082 Jy ! Component: 750 - total flux cleaned = -8.87917e-05 Jy ! Component: 800 - total flux cleaned = 6.09223e-05 Jy ! Component: 850 - total flux cleaned = 0.000171653 Jy ! Component: 900 - total flux cleaned = 0.000317089 Jy ! Component: 950 - total flux cleaned = 0.000566418 Jy ! Component: 1000 - total flux cleaned = 0.000566244 Jy ! Component: 1050 - total flux cleaned = 0.000738848 Jy ! Component: 1100 - total flux cleaned = 0.000671018 Jy ! Component: 1150 - total flux cleaned = 0.000771582 Jy ! Component: 1200 - total flux cleaned = 0.000772956 Jy ! Component: 1250 - total flux cleaned = 0.000872025 Jy ! Component: 1300 - total flux cleaned = 0.00100068 Jy ! Component: 1350 - total flux cleaned = 0.00112763 Jy ! Component: 1400 - total flux cleaned = 0.00109565 Jy ! Component: 1450 - total flux cleaned = 0.00121982 Jy ! Component: 1500 - total flux cleaned = 0.00118857 Jy ! Component: 1550 - total flux cleaned = 0.00127978 Jy ! Component: 1600 - total flux cleaned = 0.00124999 Jy ! Component: 1650 - total flux cleaned = 0.00130962 Jy ! Component: 1700 - total flux cleaned = 0.00130976 Jy ! Component: 1750 - total flux cleaned = 0.00128099 Jy ! Component: 1800 - total flux cleaned = 0.00128083 Jy ! Component: 1850 - total flux cleaned = 0.00133811 Jy ! Component: 1900 - total flux cleaned = 0.00130932 Jy ! Component: 1950 - total flux cleaned = 0.00128113 Jy ! Component: 2000 - total flux cleaned = 0.00117059 Jy ! Total flux subtracted in 2048 components = 0.00125363 Jy ! Clean residual min=-0.001448 max=0.001778 Jy/beam ! Clean residual mean=0.000005 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.123686 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 197 components and 0.123686 Jy ![Exited script file: muppet] wmap "J2120-0330_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8744 x 2.158 at -1.389 degrees (North through East) ! Clean map min=-0.0039954 max=0.097604 Jy/beam ! Writing clean map to FITS file: J2120-0330_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0976035 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000527353 device "J2120-0330_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J2120-0330_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.6209 1.6209 3.24181 6.48361 12.9672 25.9345 51.8689 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.097 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8744 x 2.158 at -1.389 degrees (North through East) ! Clean map min=-0.0039954 max=0.097604 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2120-0330_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J2120-0330_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2120-0330_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 11:02:17 2006