! Started logfile: J2047-2849_S_2005_07_09_yyk_uvs.log on Fri Jan 20 11:01:10 2006 obs J2047-2849_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J2047-2849_S_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977778 visibilities/baseline/integration-bin. ! Found source: J2047-2849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2047-2849_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.16964 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=6.375 mas, bpa=-0.02896 degrees ! Estimated noise=2.05476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101251 Jy ! Component: 100 - total flux cleaned = 0.133027 Jy ! Total flux subtracted in 100 components = 0.133027 Jy ! Clean residual min=-0.008928 max=0.014276 Jy/beam ! Clean residual mean=-0.000049 rms=0.002854 Jy/beam ! Combined flux in latest and established models = 0.133027 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.133027 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.091079Jy sigma=1.235950 ! Fit after self-cal, rms=0.090936Jy sigma=1.229799 ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=6.376 mas, bpa=-0.02744 degrees ! Estimated noise=2.05379 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=9.313 mas, bpa=-7.029 degrees ! Estimated noise=1.26064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240849 Jy ! Component: 100 - total flux cleaned = 0.0325695 Jy ! Component: 150 - total flux cleaned = 0.0348796 Jy ! Component: 200 - total flux cleaned = 0.0351854 Jy ! Total flux subtracted in 200 components = 0.0351854 Jy ! Clean residual min=-0.007688 max=0.011695 Jy/beam ! Clean residual mean=0.000058 rms=0.002807 Jy/beam ! Combined flux in latest and established models = 0.168212 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 43 components and 0.168212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084913Jy sigma=1.150821 ! Fit after self-cal, rms=0.084911Jy sigma=1.150782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.469 x 9.313 at -7.029 degrees (North through East) ! Clean map min=-0.0075274 max=0.12442 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.993504 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.00* KP 0.88 ! LA 0.99 MK 1.14 NL 0.97 OV 1.03 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02849 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00* KP 0.90 ! LA 0.98 MK 1.01 NL 1.10 OV 0.91 ! PT 1.00 SC 0.85 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.084911Jy sigma=1.150782 ! Fit after self-cal, rms=0.084575Jy sigma=1.141783 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084575Jy sigma=1.141783 ! Fit after self-cal, rms=0.084580Jy sigma=1.141766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=9.134 mas, bpa=-5.332 degrees ! Estimated noise=1.24719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000944825 Jy ! Component: 100 - total flux cleaned = -0.000576147 Jy ! Component: 150 - total flux cleaned = -0.000410851 Jy ! Component: 200 - total flux cleaned = -0.000251909 Jy ! Total flux subtracted in 200 components = -0.000251909 Jy ! Clean residual min=-0.007014 max=0.010809 Jy/beam ! Clean residual mean=0.000136 rms=0.002542 Jy/beam ! Combined flux in latest and established models = 0.16796 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.16796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084628Jy sigma=1.139237 ! Fit after self-cal, rms=0.084629Jy sigma=1.139228 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084629Jy sigma=1.139228 ! Fit after self-cal, rms=0.080585Jy sigma=1.090878 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180539 Jy ! Component: 100 - total flux cleaned = 0.00188564 Jy ! Component: 150 - total flux cleaned = 0.00188284 Jy ! Component: 200 - total flux cleaned = 0.0019497 Jy ! Total flux subtracted in 200 components = 0.0019497 Jy ! Clean residual min=-0.007048 max=0.010034 Jy/beam ! Clean residual mean=0.000137 rms=0.002481 Jy/beam ! Combined flux in latest and established models = 0.16991 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.16991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080410Jy sigma=1.088443 ! Fit after self-cal, rms=0.080167Jy sigma=1.085271 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.488 x 9.134 at -5.332 degrees (North through East) ! Clean map min=-0.006862 max=0.12124 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080167Jy sigma=1.085271 ! Fit after self-cal, rms=0.077801Jy sigma=1.079905 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077801Jy sigma=1.079905 ! Fit after self-cal, rms=0.077796Jy sigma=1.079546 ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=8.928 mas, bpa=-4.558 degrees ! Estimated noise=1.21922 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00238292 Jy ! Component: 100 - total flux cleaned = -0.00239186 Jy ! Component: 150 - total flux cleaned = -0.00226972 Jy ! Component: 200 - total flux cleaned = -0.00221226 Jy ! Total flux subtracted in 200 components = -0.00221226 Jy ! Clean residual min=-0.006872 max=0.009469 Jy/beam ! Clean residual mean=0.000144 rms=0.002378 Jy/beam ! Combined flux in latest and established models = 0.167698 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.167698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077954Jy sigma=1.077364 ! Fit after self-cal, rms=0.077957Jy sigma=1.077300 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077957Jy sigma=1.077300 ! Fit after self-cal, rms=0.078522Jy sigma=1.080482 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078522Jy sigma=1.080482 ! Fit after self-cal, rms=0.078541Jy sigma=1.080426 ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=8.973 mas, bpa=-4.813 degrees ! Estimated noise=1.21604 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000734668 Jy ! Component: 100 - total flux cleaned = -0.000680739 Jy ! Component: 150 - total flux cleaned = -0.000575027 Jy ! Component: 200 - total flux cleaned = -0.000521887 Jy ! Total flux subtracted in 200 components = -0.000521887 Jy ! Clean residual min=-0.006727 max=0.009040 Jy/beam ! Clean residual mean=0.000110 rms=0.002321 Jy/beam ! Combined flux in latest and established models = 0.167176 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.167176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078585Jy sigma=1.079389 ! Fit after self-cal, rms=0.078588Jy sigma=1.079369 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.493 mas, bmaj=24.88 mas, bpa=6.909 degrees ! Estimated noise=1.46579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255782 Jy ! Component: 100 - total flux cleaned = 0.00293 Jy ! Component: 150 - total flux cleaned = 0.0031665 Jy ! Component: 200 - total flux cleaned = 0.00350702 Jy ! Total flux subtracted in 200 components = 0.00350702 Jy ! Clean residual min=-0.007008 max=0.009626 Jy/beam ! Clean residual mean=0.000179 rms=0.002946 Jy/beam ! Combined flux in latest and established models = 0.170683 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.170683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078600Jy sigma=1.079769 ! Fit after self-cal, rms=0.078576Jy sigma=1.079634 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=6.346 mas, bpa=1.216 degrees ! Estimated noise=1.964 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0996339 Jy ! Component: 100 - total flux cleaned = 0.130442 Jy ! Component: 150 - total flux cleaned = 0.146148 Jy ! Component: 200 - total flux cleaned = 0.154373 Jy ! Total flux subtracted in 200 components = 0.154372 Jy ! Clean residual min=-0.007621 max=0.009424 Jy/beam ! Clean residual mean=0.000004 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 0.154372 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.154372 Jy ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=8.973 mas, bpa=-4.813 degrees ! Estimated noise=1.21604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081569 Jy ! Component: 100 - total flux cleaned = 0.00891984 Jy ! Component: 150 - total flux cleaned = 0.00926051 Jy ! Component: 200 - total flux cleaned = 0.00958831 Jy ! Total flux subtracted in 200 components = 0.00958831 Jy ! Clean residual min=-0.007401 max=0.010167 Jy/beam ! Clean residual mean=0.000116 rms=0.002514 Jy/beam ! Combined flux in latest and established models = 0.163961 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.163961 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.493 mas, bmaj=24.88 mas, bpa=6.909 degrees ! Estimated noise=1.46579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393079 Jy ! Component: 100 - total flux cleaned = 0.00424439 Jy ! Component: 150 - total flux cleaned = 0.00469061 Jy ! Component: 200 - total flux cleaned = 0.00511398 Jy ! Total flux subtracted in 200 components = 0.00511398 Jy ! Clean residual min=-0.007080 max=0.010088 Jy/beam ! Clean residual mean=0.000186 rms=0.003102 Jy/beam ! Combined flux in latest and established models = 0.169075 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 44 components and 0.169075 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=8.973 mas, bpa=-4.813 degrees ! Estimated noise=1.21604 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00287965 Jy ! Component: 100 - total flux cleaned = -0.00278985 Jy ! Component: 150 - total flux cleaned = -0.00264045 Jy ! Component: 200 - total flux cleaned = -0.00250869 Jy ! Total flux subtracted in 200 components = -0.00250869 Jy ! Clean residual min=-0.006936 max=0.009168 Jy/beam ! Clean residual mean=0.000111 rms=0.002356 Jy/beam ! Combined flux in latest and established models = 0.166566 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.166566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078688Jy sigma=1.081316 ! Fit after self-cal, rms=0.078679Jy sigma=1.081243 wmodel J2047-2849_S_2005_07_09_yyk\_map.mod ! Writing 51 model components to file: J2047-2849_S_2005_07_09_yyk_map.mod wobs J2047-2849_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J2047-2849_S_2005_07_09_yyk_uvs.fits wwins J2047-2849_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J2047-2849_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414352 Jy ! Component: 100 - total flux cleaned = 0.00692728 Jy ! Component: 150 - total flux cleaned = 0.00838578 Jy ! Component: 200 - total flux cleaned = 0.00969411 Jy ! Component: 250 - total flux cleaned = 0.0110254 Jy ! Component: 300 - total flux cleaned = 0.0124737 Jy ! Component: 350 - total flux cleaned = 0.0140227 Jy ! Component: 400 - total flux cleaned = 0.0150656 Jy ! Component: 450 - total flux cleaned = 0.0157295 Jy ! Component: 500 - total flux cleaned = 0.0161274 Jy ! Component: 550 - total flux cleaned = 0.0164318 Jy ! Component: 600 - total flux cleaned = 0.0167233 Jy ! Component: 650 - total flux cleaned = 0.0168638 Jy ! Component: 700 - total flux cleaned = 0.0171349 Jy ! Component: 750 - total flux cleaned = 0.0172659 Jy ! Component: 800 - total flux cleaned = 0.0173925 Jy ! Component: 850 - total flux cleaned = 0.017576 Jy ! Component: 900 - total flux cleaned = 0.0178109 Jy ! Component: 950 - total flux cleaned = 0.0179802 Jy ! Component: 1000 - total flux cleaned = 0.0181462 Jy ! Component: 1050 - total flux cleaned = 0.0183627 Jy ! Component: 1100 - total flux cleaned = 0.0185211 Jy ! Component: 1150 - total flux cleaned = 0.0187777 Jy ! Component: 1200 - total flux cleaned = 0.0188276 Jy ! Component: 1250 - total flux cleaned = 0.0190244 Jy ! Component: 1300 - total flux cleaned = 0.0190732 Jy ! Component: 1350 - total flux cleaned = 0.0190745 Jy ! Component: 1400 - total flux cleaned = 0.0191204 Jy ! Component: 1450 - total flux cleaned = 0.0188935 Jy ! Component: 1500 - total flux cleaned = 0.0188051 Jy ! Component: 1550 - total flux cleaned = 0.018674 Jy ! Component: 1600 - total flux cleaned = 0.0185458 Jy ! Component: 1650 - total flux cleaned = 0.0185039 Jy ! Component: 1700 - total flux cleaned = 0.0182552 Jy ! Component: 1750 - total flux cleaned = 0.0180926 Jy ! Component: 1800 - total flux cleaned = 0.0179326 Jy ! Component: 1850 - total flux cleaned = 0.0176964 Jy ! Component: 1900 - total flux cleaned = 0.0175415 Jy ! Component: 1950 - total flux cleaned = 0.0174269 Jy ! Component: 2000 - total flux cleaned = 0.0173137 Jy ! Total flux subtracted in 2048 components = 0.0172019 Jy ! Clean residual min=-0.001954 max=0.002487 Jy/beam ! Clean residual mean=-0.000004 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.183768 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 178 components and 0.183768 Jy ![Exited script file: muppet] wmap "J2047-2849_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.448 x 8.973 at -4.813 degrees (North through East) ! Clean map min=-0.0049128 max=0.11609 Jy/beam ! Writing clean map to FITS file: J2047-2849_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116085 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000783869 device "J2047-2849_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J2047-2849_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.02576 2.02576 4.05153 8.10305 16.2061 32.4122 64.8244 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.448 x 8.973 at -4.813 degrees (North through East) ! Clean map min=-0.0049128 max=0.11609 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2047-2849_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J2047-2849_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2047-2849_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 11:01:14 2006