! Started logfile: J2022-1204_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:58:26 2006 obs J2022-1204_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J2022-1204_S_2005_07_09_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.951515 visibilities/baseline/integration-bin. ! Found source: J2022-1204 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1884 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2022-1204_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.134316 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=6.619 mas, bpa=-0.8921 degrees ! Estimated noise=1.28497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0983933 Jy ! Component: 100 - total flux cleaned = 0.113387 Jy ! Total flux subtracted in 100 components = 0.113387 Jy ! Clean residual min=-0.006876 max=0.006045 Jy/beam ! Clean residual mean=-0.000065 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.113387 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.113387 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.068950Jy sigma=1.057170 ! Fit after self-cal, rms=0.068607Jy sigma=1.050647 ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=6.619 mas, bpa=-0.9107 degrees ! Estimated noise=1.28541 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=8.161 mas, bpa=-3.261 degrees ! Estimated noise=0.940322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477693 Jy ! Component: 100 - total flux cleaned = 0.00658567 Jy ! Component: 150 - total flux cleaned = 0.0067577 Jy ! Component: 200 - total flux cleaned = 0.00675686 Jy ! Total flux subtracted in 200 components = 0.00675686 Jy ! Clean residual min=-0.004302 max=0.005484 Jy/beam ! Clean residual mean=-0.000127 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.120144 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.120144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068339Jy sigma=1.046170 ! Fit after self-cal, rms=0.068339Jy sigma=1.046112 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.207 x 8.161 at -3.261 degrees (North through East) ! Clean map min=-0.0040533 max=0.11317 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00934 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.01 KP 1.00 ! LA 1.05 MK 0.89 NL 0.96 OV 1.00 ! PT 1.06 SC 0.89 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.99761 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 0.98 KP 0.95 ! LA 1.13 MK 1.00 NL 0.95 OV 0.98 ! PT 1.06 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.068339Jy sigma=1.046112 ! Fit after self-cal, rms=0.067904Jy sigma=1.039728 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067904Jy sigma=1.039728 ! Fit after self-cal, rms=0.067902Jy sigma=1.039715 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.92 mas, bpa=-2.774 degrees ! Estimated noise=0.945329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295053 Jy ! Component: 100 - total flux cleaned = 0.0037011 Jy ! Component: 150 - total flux cleaned = 0.00395275 Jy ! Component: 200 - total flux cleaned = 0.00416071 Jy ! Total flux subtracted in 200 components = 0.00416071 Jy ! Clean residual min=-0.003804 max=0.005246 Jy/beam ! Clean residual mean=-0.000050 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.124304 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.124304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067797Jy sigma=1.037799 ! Fit after self-cal, rms=0.067798Jy sigma=1.037778 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067798Jy sigma=1.037778 ! Fit after self-cal, rms=0.064457Jy sigma=0.988209 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.5, 38). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302902 Jy ! Component: 100 - total flux cleaned = 0.00371586 Jy ! Component: 150 - total flux cleaned = 0.00413425 Jy ! Component: 200 - total flux cleaned = 0.00447251 Jy ! Total flux subtracted in 200 components = 0.00447251 Jy ! Clean residual min=-0.003927 max=0.003743 Jy/beam ! Clean residual mean=-0.000054 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.128777 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.128777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064222Jy sigma=0.981281 ! Fit after self-cal, rms=0.063879Jy sigma=0.977358 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.92 at -2.774 degrees (North through East) ! Clean map min=-0.0038186 max=0.1144 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063879Jy sigma=0.977358 ! Fit after self-cal, rms=0.062320Jy sigma=0.965585 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062320Jy sigma=0.965585 ! Fit after self-cal, rms=0.062294Jy sigma=0.965103 ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=7.904 mas, bpa=-3.01 degrees ! Estimated noise=0.928819 mJy/beam. ! Added new window around map position (47.5, 26). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277424 Jy ! Component: 100 - total flux cleaned = 0.00318157 Jy ! Component: 150 - total flux cleaned = 0.00326859 Jy ! Component: 200 - total flux cleaned = 0.00341902 Jy ! Total flux subtracted in 200 components = 0.00341902 Jy ! Clean residual min=-0.002826 max=0.002806 Jy/beam ! Clean residual mean=-0.000063 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.132196 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.132196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062045Jy sigma=0.959757 ! Fit after self-cal, rms=0.062033Jy sigma=0.959456 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062033Jy sigma=0.959456 ! Fit after self-cal, rms=0.062275Jy sigma=0.951946 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062275Jy sigma=0.951946 ! Fit after self-cal, rms=0.062291Jy sigma=0.951762 ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=7.88 mas, bpa=-2.785 degrees ! Estimated noise=0.93562 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107057 Jy ! Component: 100 - total flux cleaned = 0.000242917 Jy ! Component: 150 - total flux cleaned = 0.000495952 Jy ! Component: 200 - total flux cleaned = 0.000726193 Jy ! Total flux subtracted in 200 components = 0.000726193 Jy ! Clean residual min=-0.002780 max=0.002499 Jy/beam ! Clean residual mean=-0.000062 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.132922 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.132922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062183Jy sigma=0.949762 ! Fit after self-cal, rms=0.062187Jy sigma=0.949679 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.851 mas, bmaj=15.06 mas, bpa=7.995 degrees ! Estimated noise=1.21293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696958 Jy ! Component: 100 - total flux cleaned = 0.00105878 Jy ! Component: 150 - total flux cleaned = 0.00132357 Jy ! Component: 200 - total flux cleaned = 0.00144005 Jy ! Total flux subtracted in 200 components = 0.00144005 Jy ! Clean residual min=-0.003299 max=0.002189 Jy/beam ! Clean residual mean=-0.000146 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.134362 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 125 components and 0.134362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062150Jy sigma=0.949304 ! Fit after self-cal, rms=0.062144Jy sigma=0.949244 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=6.554 mas, bpa=-0.6762 degrees ! Estimated noise=1.25591 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0975125 Jy ! Component: 100 - total flux cleaned = 0.11433 Jy ! Component: 150 - total flux cleaned = 0.121434 Jy ! Component: 200 - total flux cleaned = 0.124619 Jy ! Total flux subtracted in 200 components = 0.124619 Jy ! Clean residual min=-0.005069 max=0.004731 Jy/beam ! Clean residual mean=-0.000048 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.124619 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.124619 Jy ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=7.88 mas, bpa=-2.785 degrees ! Estimated noise=0.93562 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379736 Jy ! Component: 100 - total flux cleaned = 0.00521786 Jy ! Component: 150 - total flux cleaned = 0.00638954 Jy ! Component: 200 - total flux cleaned = 0.00703746 Jy ! Total flux subtracted in 200 components = 0.00703746 Jy ! Clean residual min=-0.002964 max=0.002672 Jy/beam ! Clean residual mean=-0.000057 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.131656 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 59 components and 0.131656 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.851 mas, bmaj=15.06 mas, bpa=7.995 degrees ! Estimated noise=1.21293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119994 Jy ! Component: 100 - total flux cleaned = 0.00179273 Jy ! Component: 150 - total flux cleaned = 0.00212295 Jy ! Component: 200 - total flux cleaned = 0.00232949 Jy ! Total flux subtracted in 200 components = 0.00232949 Jy ! Clean residual min=-0.003272 max=0.002046 Jy/beam ! Clean residual mean=-0.000146 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.133986 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 88 components and 0.133986 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=7.88 mas, bpa=-2.785 degrees ! Estimated noise=0.93562 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213808 Jy ! Component: 100 - total flux cleaned = 0.000432355 Jy ! Component: 150 - total flux cleaned = 0.000625838 Jy ! Component: 200 - total flux cleaned = 0.000743908 Jy ! Total flux subtracted in 200 components = 0.000743908 Jy ! Clean residual min=-0.002906 max=0.002475 Jy/beam ! Clean residual mean=-0.000067 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.13473 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.13473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062133Jy sigma=0.949945 ! Fit after self-cal, rms=0.062133Jy sigma=0.949868 wmodel J2022-1204_S_2005_07_09_yyk\_map.mod ! Writing 103 model components to file: J2022-1204_S_2005_07_09_yyk_map.mod wobs J2022-1204_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J2022-1204_S_2005_07_09_yyk_uvs.fits wwins J2022-1204_S_2005_07_09_yyk\_map.win ! wwins: Wrote 3 windows to J2022-1204_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102805 Jy ! Component: 100 - total flux cleaned = -0.00153293 Jy ! Component: 150 - total flux cleaned = -0.00179239 Jy ! Component: 200 - total flux cleaned = -0.00204141 Jy ! Component: 250 - total flux cleaned = -0.00216299 Jy ! Component: 300 - total flux cleaned = -0.00235795 Jy ! Component: 350 - total flux cleaned = -0.00247127 Jy ! Component: 400 - total flux cleaned = -0.00265549 Jy ! Component: 450 - total flux cleaned = -0.00276303 Jy ! Component: 500 - total flux cleaned = -0.0029033 Jy ! Component: 550 - total flux cleaned = -0.00307472 Jy ! Component: 600 - total flux cleaned = -0.0032757 Jy ! Component: 650 - total flux cleaned = -0.00327571 Jy ! Component: 700 - total flux cleaned = -0.00334026 Jy ! Component: 750 - total flux cleaned = -0.00356125 Jy ! Component: 800 - total flux cleaned = -0.00368519 Jy ! Component: 850 - total flux cleaned = -0.00383746 Jy ! Component: 900 - total flux cleaned = -0.00398802 Jy ! Component: 950 - total flux cleaned = -0.00422501 Jy ! Component: 1000 - total flux cleaned = -0.00437119 Jy ! Component: 1050 - total flux cleaned = -0.004572 Jy ! Component: 1100 - total flux cleaned = -0.00477023 Jy ! Component: 1150 - total flux cleaned = -0.00502108 Jy ! Component: 1200 - total flux cleaned = -0.00518645 Jy ! Component: 1250 - total flux cleaned = -0.00548423 Jy ! Component: 1300 - total flux cleaned = -0.00567093 Jy ! Component: 1350 - total flux cleaned = -0.00588153 Jy ! Component: 1400 - total flux cleaned = -0.00606316 Jy ! Component: 1450 - total flux cleaned = -0.00621667 Jy ! Component: 1500 - total flux cleaned = -0.0063431 Jy ! Component: 1550 - total flux cleaned = -0.00644257 Jy ! Component: 1600 - total flux cleaned = -0.00651649 Jy ! Component: 1650 - total flux cleaned = -0.00656552 Jy ! Component: 1700 - total flux cleaned = -0.0066383 Jy ! Component: 1750 - total flux cleaned = -0.00670976 Jy ! Component: 1800 - total flux cleaned = -0.00680428 Jy ! Component: 1850 - total flux cleaned = -0.00678077 Jy ! Component: 1900 - total flux cleaned = -0.00689712 Jy ! Component: 1950 - total flux cleaned = -0.00696607 Jy ! Component: 2000 - total flux cleaned = -0.00703444 Jy ! Total flux subtracted in 2048 components = -0.00716976 Jy ! Clean residual min=-0.001460 max=0.001276 Jy/beam ! Clean residual mean=-0.000040 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.12756 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 232 components and 0.12756 Jy ![Exited script file: muppet] wmap "J2022-1204_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 7.88 at -2.785 degrees (North through East) ! Clean map min=-0.0033173 max=0.11383 Jy/beam ! Writing clean map to FITS file: J2022-1204_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113831 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000449656 device "J2022-1204_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J2022-1204_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18506 1.18506 2.37013 4.74025 9.4805 18.961 37.922 75.844 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 7.88 at -2.785 degrees (North through East) ! Clean map min=-0.0033173 max=0.11383 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2022-1204_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J2022-1204_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2022-1204_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:58:30 2006