! Started logfile: J2016-2708_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:58:18 2006 obs J2016-2708_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J2016-2708_S_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96 visibilities/baseline/integration-bin. ! Found source: J2016-2708 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2016-2708_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.172141 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.358 mas, bmaj=6.026 mas, bpa=2.457 degrees ! Estimated noise=1.87024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.107995 Jy ! Component: 100 - total flux cleaned = 0.129359 Jy ! Total flux subtracted in 100 components = 0.129359 Jy ! Clean residual min=-0.011558 max=0.017691 Jy/beam ! Clean residual mean=-0.000004 rms=0.003718 Jy/beam ! Combined flux in latest and established models = 0.129359 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.129359 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.102499Jy sigma=1.593489 ! Fit after self-cal, rms=0.086345Jy sigma=1.335677 ! Inverting map and beam ! Estimated beam: bmin=2.358 mas, bmaj=6.026 mas, bpa=2.457 degrees ! Estimated noise=1.87024 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=7.976 mas, bpa=-0.1554 degrees ! Estimated noise=1.17001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242306 Jy ! Component: 100 - total flux cleaned = 0.0329359 Jy ! Component: 150 - total flux cleaned = 0.0358441 Jy ! Component: 200 - total flux cleaned = 0.036241 Jy ! Total flux subtracted in 200 components = 0.036241 Jy ! Clean residual min=-0.012796 max=0.017789 Jy/beam ! Clean residual mean=0.000585 rms=0.004495 Jy/beam ! Combined flux in latest and established models = 0.1656 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.1656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081052Jy sigma=1.252446 ! Fit after self-cal, rms=0.081030Jy sigma=1.252101 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.24 x 7.976 at -0.1554 degrees (North through East) ! Clean map min=-0.012622 max=0.13686 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.081030Jy sigma=1.252101 ! Fit after self-cal, rms=0.081030Jy sigma=1.252101 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081030Jy sigma=1.252101 ! Fit after self-cal, rms=0.081028Jy sigma=1.252053 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=7.976 mas, bpa=-0.1554 degrees ! Estimated noise=1.17001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159528 Jy ! Component: 100 - total flux cleaned = 0.000500938 Jy ! Component: 150 - total flux cleaned = 0.000647792 Jy ! Component: 200 - total flux cleaned = 0.000794243 Jy ! Total flux subtracted in 200 components = 0.000794243 Jy ! Clean residual min=-0.012778 max=0.017542 Jy/beam ! Clean residual mean=0.000578 rms=0.004439 Jy/beam ! Combined flux in latest and established models = 0.166394 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.166394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081024Jy sigma=1.249887 ! Fit after self-cal, rms=0.081006Jy sigma=1.249711 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081006Jy sigma=1.249711 ! Fit after self-cal, rms=0.077793Jy sigma=1.209511 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110933 Jy ! Component: 100 - total flux cleaned = 0.00141608 Jy ! Component: 150 - total flux cleaned = 0.00155182 Jy ! Component: 200 - total flux cleaned = 0.00167929 Jy ! Total flux subtracted in 200 components = 0.00167929 Jy ! Clean residual min=-0.012795 max=0.017372 Jy/beam ! Clean residual mean=0.000566 rms=0.004377 Jy/beam ! Combined flux in latest and established models = 0.168073 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.168073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077756Jy sigma=1.207745 ! Fit after self-cal, rms=0.077524Jy sigma=1.205221 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.24 x 7.976 at -0.1554 degrees (North through East) ! Clean map min=-0.012584 max=0.13621 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077524Jy sigma=1.205221 ! Fit after self-cal, rms=0.076549Jy sigma=1.201257 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076549Jy sigma=1.201257 ! Fit after self-cal, rms=0.076532Jy sigma=1.200944 ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=7.931 mas, bpa=0.02103 degrees ! Estimated noise=1.15961 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174481 Jy ! Component: 100 - total flux cleaned = 1.92536e-05 Jy ! Component: 150 - total flux cleaned = 0.000138713 Jy ! Component: 200 - total flux cleaned = 0.000256429 Jy ! Total flux subtracted in 200 components = 0.000256429 Jy ! Clean residual min=-0.012253 max=0.017258 Jy/beam ! Clean residual mean=0.000595 rms=0.004368 Jy/beam ! Combined flux in latest and established models = 0.16833 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.16833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076631Jy sigma=1.199610 ! Fit after self-cal, rms=0.076625Jy sigma=1.199543 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076625Jy sigma=1.199543 ! Fit after self-cal, rms=0.075683Jy sigma=1.194158 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075683Jy sigma=1.194158 ! Fit after self-cal, rms=0.075689Jy sigma=1.194087 ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.885 mas, bpa=-0.1101 degrees ! Estimated noise=1.15454 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000459091 Jy ! Component: 100 - total flux cleaned = 0.000755901 Jy ! Component: 150 - total flux cleaned = 0.00096935 Jy ! Component: 200 - total flux cleaned = 0.00101989 Jy ! Total flux subtracted in 200 components = 0.00101989 Jy ! Clean residual min=-0.011802 max=0.016719 Jy/beam ! Clean residual mean=0.000583 rms=0.004277 Jy/beam ! Combined flux in latest and established models = 0.16935 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.16935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075765Jy sigma=1.192985 ! Fit after self-cal, rms=0.075759Jy sigma=1.192962 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.017 mas, bmaj=21.59 mas, bpa=11.29 degrees ! Estimated noise=1.4615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611126 Jy ! Component: 100 - total flux cleaned = 0.00684586 Jy ! Component: 150 - total flux cleaned = 0.0073044 Jy ! Component: 200 - total flux cleaned = 0.00794286 Jy ! Total flux subtracted in 200 components = 0.00794286 Jy ! Clean residual min=-0.016215 max=0.020649 Jy/beam ! Clean residual mean=0.000996 rms=0.006283 Jy/beam ! Combined flux in latest and established models = 0.177292 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 0.177292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076918Jy sigma=1.200151 ! Fit after self-cal, rms=0.076870Jy sigma=1.198718 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.344 mas, bmaj=6.018 mas, bpa=2.459 degrees ! Estimated noise=1.81018 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.118304 Jy ! Component: 100 - total flux cleaned = 0.141559 Jy ! Component: 150 - total flux cleaned = 0.151743 Jy ! Component: 200 - total flux cleaned = 0.156969 Jy ! Total flux subtracted in 200 components = 0.156969 Jy ! Clean residual min=-0.007662 max=0.008688 Jy/beam ! Clean residual mean=0.000015 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 0.156969 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.156969 Jy ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.885 mas, bpa=-0.1101 degrees ! Estimated noise=1.15454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00732492 Jy ! Component: 100 - total flux cleaned = 0.00815775 Jy ! Component: 150 - total flux cleaned = 0.00885892 Jy ! Component: 200 - total flux cleaned = 0.00934528 Jy ! Total flux subtracted in 200 components = 0.00934528 Jy ! Clean residual min=-0.011813 max=0.018030 Jy/beam ! Clean residual mean=0.000606 rms=0.004545 Jy/beam ! Combined flux in latest and established models = 0.166314 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.166314 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.017 mas, bmaj=21.59 mas, bpa=11.29 degrees ! Estimated noise=1.4615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701584 Jy ! Component: 100 - total flux cleaned = 0.00787916 Jy ! Component: 150 - total flux cleaned = 0.00841291 Jy ! Component: 200 - total flux cleaned = 0.00917429 Jy ! Total flux subtracted in 200 components = 0.00917429 Jy ! Clean residual min=-0.016652 max=0.021806 Jy/beam ! Clean residual mean=0.001022 rms=0.006530 Jy/beam ! Combined flux in latest and established models = 0.175489 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 28 components and 0.175489 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.885 mas, bpa=-0.1101 degrees ! Estimated noise=1.15454 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0058668 Jy ! Component: 100 - total flux cleaned = -0.00605443 Jy ! Component: 150 - total flux cleaned = -0.00618529 Jy ! Component: 200 - total flux cleaned = -0.00607392 Jy ! Total flux subtracted in 200 components = -0.00607392 Jy ! Clean residual min=-0.011861 max=0.016690 Jy/beam ! Clean residual mean=0.000582 rms=0.004262 Jy/beam ! Combined flux in latest and established models = 0.169415 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.169415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075784Jy sigma=1.192410 ! Fit after self-cal, rms=0.075755Jy sigma=1.192142 wmodel J2016-2708_S_2005_07_09_yyk\_map.mod ! Writing 41 model components to file: J2016-2708_S_2005_07_09_yyk_map.mod wobs J2016-2708_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J2016-2708_S_2005_07_09_yyk_uvs.fits wwins J2016-2708_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J2016-2708_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701964 Jy ! Component: 100 - total flux cleaned = 0.0119759 Jy ! Component: 150 - total flux cleaned = 0.0149058 Jy ! Component: 200 - total flux cleaned = 0.017819 Jy ! Component: 250 - total flux cleaned = 0.0185933 Jy ! Component: 300 - total flux cleaned = 0.0190171 Jy ! Component: 350 - total flux cleaned = 0.0199302 Jy ! Component: 400 - total flux cleaned = 0.0207853 Jy ! Component: 450 - total flux cleaned = 0.0219435 Jy ! Component: 500 - total flux cleaned = 0.0230382 Jy ! Component: 550 - total flux cleaned = 0.0236632 Jy ! Component: 600 - total flux cleaned = 0.0242539 Jy ! Component: 650 - total flux cleaned = 0.0245318 Jy ! Component: 700 - total flux cleaned = 0.0245328 Jy ! Component: 750 - total flux cleaned = 0.0249688 Jy ! Component: 800 - total flux cleaned = 0.0253866 Jy ! Component: 850 - total flux cleaned = 0.0254675 Jy ! Component: 900 - total flux cleaned = 0.0258622 Jy ! Component: 950 - total flux cleaned = 0.0263935 Jy ! Component: 1000 - total flux cleaned = 0.0267618 Jy ! Component: 1050 - total flux cleaned = 0.0269035 Jy ! Component: 1100 - total flux cleaned = 0.0271789 Jy ! Component: 1150 - total flux cleaned = 0.0272465 Jy ! Component: 1200 - total flux cleaned = 0.0273137 Jy ! Component: 1250 - total flux cleaned = 0.0276943 Jy ! Component: 1300 - total flux cleaned = 0.0276322 Jy ! Component: 1350 - total flux cleaned = 0.0277525 Jy ! Component: 1400 - total flux cleaned = 0.0276947 Jy ! Component: 1450 - total flux cleaned = 0.0275821 Jy ! Component: 1500 - total flux cleaned = 0.0276947 Jy ! Component: 1550 - total flux cleaned = 0.0275302 Jy ! Component: 1600 - total flux cleaned = 0.0274222 Jy ! Component: 1650 - total flux cleaned = 0.0273705 Jy ! Component: 1700 - total flux cleaned = 0.0273702 Jy ! Component: 1750 - total flux cleaned = 0.0273695 Jy ! Component: 1800 - total flux cleaned = 0.0273706 Jy ! Component: 1850 - total flux cleaned = 0.0273712 Jy ! Component: 1900 - total flux cleaned = 0.0273715 Jy ! Component: 1950 - total flux cleaned = 0.0274175 Jy ! Component: 2000 - total flux cleaned = 0.0274631 Jy ! Total flux subtracted in 2048 components = 0.0274623 Jy ! Clean residual min=-0.003639 max=0.002791 Jy/beam ! Clean residual mean=0.000073 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.196877 Jy keep ! Adding 165 model components to the UV plane model. ! The established model now contains 206 components and 0.196877 Jy ![Exited script file: muppet] wmap "J2016-2708_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 7.885 at -0.1101 degrees (North through East) ! Clean map min=-0.0059939 max=0.13121 Jy/beam ! Writing clean map to FITS file: J2016-2708_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.131213 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000908309 device "J2016-2708_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J2016-2708_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.07673 2.07673 4.15345 8.3069 16.6138 33.2276 66.4552 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.131 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 7.885 at -0.1101 degrees (North through East) ! Clean map min=-0.0059939 max=0.13121 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2016-2708_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J2016-2708_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2016-2708_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:58:22 2006