! Started logfile: J2011-1546_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:58:01 2006 obs J2011-1546_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J2011-1546_S_2005_07_09_yyk_uve.fits ! AN table 1: 3 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J2011-1546 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1601 lines of history. ! ! Reading 432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2011-1546_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.610008 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=6.211 mas, bpa=-2.162 degrees ! Estimated noise=2.90562 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.513411 Jy ! Component: 100 - total flux cleaned = 0.589818 Jy ! Total flux subtracted in 100 components = 0.589818 Jy ! Clean residual min=-0.018555 max=0.021902 Jy/beam ! Clean residual mean=-0.000133 rms=0.005562 Jy/beam ! Combined flux in latest and established models = 0.589817 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.589817 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.100825Jy sigma=1.430566 ! Fit after self-cal, rms=0.100723Jy sigma=1.426343 ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=6.211 mas, bpa=-2.162 degrees ! Estimated noise=2.90562 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=7.407 mas, bpa=-1.781 degrees ! Estimated noise=2.31506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333831 Jy ! Component: 100 - total flux cleaned = 0.0470888 Jy ! Component: 150 - total flux cleaned = 0.0521833 Jy ! Component: 200 - total flux cleaned = 0.052966 Jy ! Total flux subtracted in 200 components = 0.052966 Jy ! Clean residual min=-0.012394 max=0.015130 Jy/beam ! Clean residual mean=-0.000056 rms=0.003753 Jy/beam ! Combined flux in latest and established models = 0.642783 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 46 components and 0.642784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090912Jy sigma=1.297165 ! Fit after self-cal, rms=0.090868Jy sigma=1.296718 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.707 x 7.407 at -1.781 degrees (North through East) ! Clean map min=-0.011572 max=0.59411 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00304 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.99 KP 0.98 ! LA 1.09 MK 0.91 NL 0.95 OV 1.01 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.978234 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.04 KP 1.04 ! LA 1.06 MK 1.01 NL 0.98 OV 1.03 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.990182 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.96 KP 0.99 ! LA 0.95 MK 1.11 NL 1.05 OV 1.01 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03833 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.92 KP 0.88 ! LA 1.00* MK 1.07 NL 0.93 OV 0.85 ! PT 1.00* SC 1.07 ! ! ! Fit before self-cal, rms=0.090868Jy sigma=1.296718 ! Fit after self-cal, rms=0.074159Jy sigma=1.067260 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074159Jy sigma=1.067260 ! Fit after self-cal, rms=0.074141Jy sigma=1.067207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=7.481 mas, bpa=-1.825 degrees ! Estimated noise=2.3123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00376427 Jy ! Component: 100 - total flux cleaned = -0.00426855 Jy ! Component: 150 - total flux cleaned = -0.00454793 Jy ! Component: 200 - total flux cleaned = -0.00467269 Jy ! Total flux subtracted in 200 components = -0.00467269 Jy ! Clean residual min=-0.009212 max=0.010459 Jy/beam ! Clean residual mean=-0.000013 rms=0.002621 Jy/beam ! Combined flux in latest and established models = 0.638111 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.638111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074036Jy sigma=1.064348 ! Fit after self-cal, rms=0.074006Jy sigma=1.064121 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074006Jy sigma=1.064121 ! Fit after self-cal, rms=0.072438Jy sigma=1.041669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183065 Jy ! Component: 100 - total flux cleaned = -0.000243898 Jy ! Component: 150 - total flux cleaned = -0.0002986 Jy ! Component: 200 - total flux cleaned = -0.000299203 Jy ! Total flux subtracted in 200 components = -0.000299203 Jy ! Clean residual min=-0.009187 max=0.010377 Jy/beam ! Clean residual mean=-0.000013 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 0.637812 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.637812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072378Jy sigma=1.040564 ! Fit after self-cal, rms=0.072258Jy sigma=1.039075 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.755 x 7.481 at -1.825 degrees (North through East) ! Clean map min=-0.0087223 max=0.59657 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072258Jy sigma=1.039075 ! Fit after self-cal, rms=0.067331Jy sigma=0.959922 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067331Jy sigma=0.959922 ! Fit after self-cal, rms=0.067322Jy sigma=0.959822 ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.491 mas, bpa=-1.867 degrees ! Estimated noise=2.30903 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164744 Jy ! Component: 100 - total flux cleaned = -0.00176676 Jy ! Component: 150 - total flux cleaned = -0.00182095 Jy ! Component: 200 - total flux cleaned = -0.00191616 Jy ! Total flux subtracted in 200 components = -0.00191616 Jy ! Clean residual min=-0.007760 max=0.008968 Jy/beam ! Clean residual mean=-0.000008 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 0.635895 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.635896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067260Jy sigma=0.958587 ! Fit after self-cal, rms=0.067256Jy sigma=0.958514 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067256Jy sigma=0.958514 ! Fit after self-cal, rms=0.066399Jy sigma=0.941904 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066399Jy sigma=0.941904 ! Fit after self-cal, rms=0.066401Jy sigma=0.941899 ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=7.505 mas, bpa=-1.878 degrees ! Estimated noise=2.30924 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124462 Jy ! Component: 100 - total flux cleaned = -0.00146156 Jy ! Component: 150 - total flux cleaned = -0.00160389 Jy ! Component: 200 - total flux cleaned = -0.0016912 Jy ! Total flux subtracted in 200 components = -0.0016912 Jy ! Clean residual min=-0.007674 max=0.008921 Jy/beam ! Clean residual mean=-0.000004 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 0.634204 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 74 components and 0.634204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066363Jy sigma=0.940900 ! Fit after self-cal, rms=0.066363Jy sigma=0.940833 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.541 mas, bmaj=14.7 mas, bpa=3.639 degrees ! Estimated noise=3.1436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000932025 Jy ! Component: 100 - total flux cleaned = -0.000921583 Jy ! Component: 150 - total flux cleaned = -0.000870023 Jy ! Component: 200 - total flux cleaned = -0.000784536 Jy ! Total flux subtracted in 200 components = -0.000784536 Jy ! Clean residual min=-0.008279 max=0.007864 Jy/beam ! Clean residual mean=-0.000015 rms=0.002949 Jy/beam ! Combined flux in latest and established models = 0.63342 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.63342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066506Jy sigma=0.942548 ! Fit after self-cal, rms=0.066458Jy sigma=0.941726 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.417 mas, bmaj=6.25 mas, bpa=-2.329 degrees ! Estimated noise=2.89229 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.511234 Jy ! Component: 100 - total flux cleaned = 0.584289 Jy ! Component: 150 - total flux cleaned = 0.610919 Jy ! Component: 200 - total flux cleaned = 0.624121 Jy ! Total flux subtracted in 200 components = 0.624121 Jy ! Clean residual min=-0.011062 max=0.011337 Jy/beam ! Clean residual mean=-0.000017 rms=0.002923 Jy/beam ! Combined flux in latest and established models = 0.624121 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.624121 Jy ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=7.505 mas, bpa=-1.878 degrees ! Estimated noise=2.30924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00784758 Jy ! Component: 100 - total flux cleaned = 0.00927741 Jy ! Component: 150 - total flux cleaned = 0.0102472 Jy ! Component: 200 - total flux cleaned = 0.0104622 Jy ! Total flux subtracted in 200 components = 0.0104622 Jy ! Clean residual min=-0.008351 max=0.009146 Jy/beam ! Clean residual mean=-0.000003 rms=0.002367 Jy/beam ! Combined flux in latest and established models = 0.634583 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 47 components and 0.634583 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.541 mas, bmaj=14.7 mas, bpa=3.639 degrees ! Estimated noise=3.1436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00081989 Jy ! Component: 100 - total flux cleaned = -0.000610471 Jy ! Component: 150 - total flux cleaned = -0.000450828 Jy ! Component: 200 - total flux cleaned = -0.00027883 Jy ! Total flux subtracted in 200 components = -0.00027883 Jy ! Clean residual min=-0.008100 max=0.007918 Jy/beam ! Clean residual mean=-0.000011 rms=0.002916 Jy/beam ! Combined flux in latest and established models = 0.634305 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.634305 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=7.505 mas, bpa=-1.878 degrees ! Estimated noise=2.30924 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150986 Jy ! Component: 100 - total flux cleaned = 0.00120464 Jy ! Component: 150 - total flux cleaned = 0.00104705 Jy ! Component: 200 - total flux cleaned = 0.00104659 Jy ! Total flux subtracted in 200 components = 0.00104659 Jy ! Clean residual min=-0.008107 max=0.009115 Jy/beam ! Clean residual mean=-0.000001 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.635351 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.635351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066543Jy sigma=0.943228 ! Fit after self-cal, rms=0.066543Jy sigma=0.943031 wmodel J2011-1546_S_2005_07_09_yyk\_map.mod ! Writing 67 model components to file: J2011-1546_S_2005_07_09_yyk_map.mod wobs J2011-1546_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J2011-1546_S_2005_07_09_yyk_uvs.fits wwins J2011-1546_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J2011-1546_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133418 Jy ! Component: 100 - total flux cleaned = 0.00174802 Jy ! Component: 150 - total flux cleaned = 0.00213255 Jy ! Component: 200 - total flux cleaned = 0.00201409 Jy ! Component: 250 - total flux cleaned = 0.00201296 Jy ! Component: 300 - total flux cleaned = 0.00190523 Jy ! Component: 350 - total flux cleaned = 0.00160656 Jy ! Component: 400 - total flux cleaned = 0.00151175 Jy ! Component: 450 - total flux cleaned = 0.00151174 Jy ! Component: 500 - total flux cleaned = 0.00116 Jy ! Component: 550 - total flux cleaned = 0.00107453 Jy ! Component: 600 - total flux cleaned = 0.000908913 Jy ! Component: 650 - total flux cleaned = 0.000593464 Jy ! Component: 700 - total flux cleaned = 0.000362945 Jy ! Component: 750 - total flux cleaned = -0.000158694 Jy ! Component: 800 - total flux cleaned = -0.000519062 Jy ! Component: 850 - total flux cleaned = -0.000869913 Jy ! Component: 900 - total flux cleaned = -0.00127839 Jy ! Component: 950 - total flux cleaned = -0.00161026 Jy ! Component: 1000 - total flux cleaned = -0.00205995 Jy ! Component: 1050 - total flux cleaned = -0.00243543 Jy ! Component: 1100 - total flux cleaned = -0.0028644 Jy ! Component: 1150 - total flux cleaned = -0.00333916 Jy ! Component: 1200 - total flux cleaned = -0.00374414 Jy ! Component: 1250 - total flux cleaned = -0.00397164 Jy ! Component: 1300 - total flux cleaned = -0.00424954 Jy ! Component: 1350 - total flux cleaned = -0.00462716 Jy ! Component: 1400 - total flux cleaned = -0.00499591 Jy ! Component: 1450 - total flux cleaned = -0.00520192 Jy ! Component: 1500 - total flux cleaned = -0.00555425 Jy ! Component: 1550 - total flux cleaned = -0.00580063 Jy ! Component: 1600 - total flux cleaned = -0.00614068 Jy ! Component: 1650 - total flux cleaned = -0.00647302 Jy ! Component: 1700 - total flux cleaned = -0.00675357 Jy ! Component: 1750 - total flux cleaned = -0.0070745 Jy ! Component: 1800 - total flux cleaned = -0.00743584 Jy ! Component: 1850 - total flux cleaned = -0.00774621 Jy ! Component: 1900 - total flux cleaned = -0.00805143 Jy ! Component: 1950 - total flux cleaned = -0.0083521 Jy ! Component: 2000 - total flux cleaned = -0.00860658 Jy ! Total flux subtracted in 2048 components = -0.0088576 Jy ! Clean residual min=-0.002278 max=0.002527 Jy/beam ! Clean residual mean=-0.000013 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.626494 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 214 components and 0.626494 Jy ![Exited script file: muppet] wmap "J2011-1546_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.766 x 7.505 at -1.878 degrees (North through East) ! Clean map min=-0.005547 max=0.59567 Jy/beam ! Writing clean map to FITS file: J2011-1546_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.595673 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000802235 device "J2011-1546_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J2011-1546_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.404031 0.404031 0.808062 1.61612 3.23225 6.4645 12.929 25.858 51.716 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.595 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.766 x 7.505 at -1.878 degrees (North through East) ! Clean map min=-0.005547 max=0.59567 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2011-1546_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J2011-1546_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2011-1546_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:58:05 2006