! Started logfile: J2003-0421_X_2005_07_08_yyk_uvs.log on Fri Jan 20 10:57:16 2006 obs J2003-0421_X_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J2003-0421_X_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977778 visibilities/baseline/integration-bin. ! Found source: J2003-0421 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1407 lines of history. ! ! Reading 1760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2003-0421_X_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.134879 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8263 mas, bmaj=6.003 mas, bpa=-17.5 degrees ! Estimated noise=1.98616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0973254 Jy ! Component: 100 - total flux cleaned = 0.126909 Jy ! Total flux subtracted in 100 components = 0.126909 Jy ! Clean residual min=-0.007237 max=0.009033 Jy/beam ! Clean residual mean=-0.000016 rms=0.002349 Jy/beam ! Combined flux in latest and established models = 0.126909 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.126909 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.065767Jy sigma=1.053619 ! Fit after self-cal, rms=0.064894Jy sigma=1.038481 ! Inverting map and beam ! Estimated beam: bmin=0.8263 mas, bmaj=6.003 mas, bpa=-17.5 degrees ! Estimated noise=1.98616 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=6.009 mas, bpa=-16.36 degrees ! Estimated noise=1.33518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122071 Jy ! Component: 100 - total flux cleaned = 0.0170858 Jy ! Component: 150 - total flux cleaned = 0.0188579 Jy ! Component: 200 - total flux cleaned = 0.0199426 Jy ! Total flux subtracted in 200 components = 0.0199426 Jy ! Clean residual min=-0.004278 max=0.004263 Jy/beam ! Clean residual mean=-0.000001 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.146852 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 50 components and 0.146852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063232Jy sigma=1.002019 ! Fit after self-cal, rms=0.063225Jy sigma=1.001940 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.105 x 6.009 at -16.36 degrees (North through East) ! Clean map min=-0.0039725 max=0.11552 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.994695 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.06 KP 0.99 ! LA 0.96 MK 1.07 NL 1.00 OV 1.04 ! PT 0.93 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02686 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.06 KP 0.96 ! LA 0.98 MK 0.85 NL 0.96 OV 0.91 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.063225Jy sigma=1.001940 ! Fit after self-cal, rms=0.063385Jy sigma=0.995624 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063385Jy sigma=0.995624 ! Fit after self-cal, rms=0.063387Jy sigma=0.995616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.091 mas, bmaj=6.02 mas, bpa=-16.55 degrees ! Estimated noise=1.31736 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130251 Jy ! Component: 100 - total flux cleaned = -0.00145215 Jy ! Component: 150 - total flux cleaned = -0.00139058 Jy ! Component: 200 - total flux cleaned = -0.00122315 Jy ! Total flux subtracted in 200 components = -0.00122315 Jy ! Clean residual min=-0.004179 max=0.004181 Jy/beam ! Clean residual mean=-0.000002 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.145629 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.145629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063144Jy sigma=0.992899 ! Fit after self-cal, rms=0.063148Jy sigma=0.992808 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063148Jy sigma=0.992808 ! Fit after self-cal, rms=0.059619Jy sigma=0.925586 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156303 Jy ! Component: 100 - total flux cleaned = 0.001787 Jy ! Component: 150 - total flux cleaned = 0.00193791 Jy ! Component: 200 - total flux cleaned = 0.00203303 Jy ! Total flux subtracted in 200 components = 0.00203303 Jy ! Clean residual min=-0.003870 max=0.004133 Jy/beam ! Clean residual mean=-0.000001 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.147662 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 82 components and 0.147662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059494Jy sigma=0.923622 ! Fit after self-cal, rms=0.059360Jy sigma=0.919446 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.091 x 6.02 at -16.55 degrees (North through East) ! Clean map min=-0.0037134 max=0.11633 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059360Jy sigma=0.919446 ! Fit after self-cal, rms=0.057337Jy sigma=0.907613 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057337Jy sigma=0.907613 ! Fit after self-cal, rms=0.057325Jy sigma=0.907170 ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=6.083 mas, bpa=-16.55 degrees ! Estimated noise=1.27148 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0024814 Jy ! Component: 100 - total flux cleaned = -0.00315636 Jy ! Component: 150 - total flux cleaned = -0.0034772 Jy ! Component: 200 - total flux cleaned = -0.00355039 Jy ! Total flux subtracted in 200 components = -0.00355039 Jy ! Clean residual min=-0.003630 max=0.003919 Jy/beam ! Clean residual mean=0.000003 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.144112 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 98 components and 0.144112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057235Jy sigma=0.904952 ! Fit after self-cal, rms=0.057236Jy sigma=0.904857 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057236Jy sigma=0.904857 ! Fit after self-cal, rms=0.056195Jy sigma=0.896754 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056195Jy sigma=0.896754 ! Fit after self-cal, rms=0.056207Jy sigma=0.896692 ! Inverting map and beam ! Estimated beam: bmin=1.021 mas, bmaj=6.118 mas, bpa=-16.61 degrees ! Estimated noise=1.24891 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181187 Jy ! Component: 100 - total flux cleaned = -0.0023946 Jy ! Component: 150 - total flux cleaned = -0.00260382 Jy ! Component: 200 - total flux cleaned = -0.00266794 Jy ! Total flux subtracted in 200 components = -0.00266794 Jy ! Clean residual min=-0.003503 max=0.003608 Jy/beam ! Clean residual mean=0.000002 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.141444 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 116 components and 0.141444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056139Jy sigma=0.895319 ! Fit after self-cal, rms=0.056141Jy sigma=0.895296 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=6.041 mas, bpa=-11.31 degrees ! Estimated noise=1.45111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000943979 Jy ! Component: 100 - total flux cleaned = -0.00113336 Jy ! Component: 150 - total flux cleaned = -0.00124596 Jy ! Component: 200 - total flux cleaned = -0.00135066 Jy ! Total flux subtracted in 200 components = -0.00135066 Jy ! Clean residual min=-0.004034 max=0.003802 Jy/beam ! Clean residual mean=0.000005 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.140093 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 125 components and 0.140093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056154Jy sigma=0.895104 ! Fit after self-cal, rms=0.056140Jy sigma=0.894948 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8091 mas, bmaj=6.057 mas, bpa=-17.54 degrees ! Estimated noise=1.8742 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0951323 Jy ! Component: 100 - total flux cleaned = 0.124867 Jy ! Component: 150 - total flux cleaned = 0.132241 Jy ! Component: 200 - total flux cleaned = 0.134657 Jy ! Total flux subtracted in 200 components = 0.134657 Jy ! Clean residual min=-0.006690 max=0.006203 Jy/beam ! Clean residual mean=-0.000005 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.134657 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.134657 Jy ! Inverting map and beam ! Estimated beam: bmin=1.021 mas, bmaj=6.118 mas, bpa=-16.61 degrees ! Estimated noise=1.24891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402444 Jy ! Component: 100 - total flux cleaned = 0.00576002 Jy ! Component: 150 - total flux cleaned = 0.00648204 Jy ! Component: 200 - total flux cleaned = 0.00689083 Jy ! Total flux subtracted in 200 components = 0.00689083 Jy ! Clean residual min=-0.003674 max=0.003836 Jy/beam ! Clean residual mean=0.000001 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.141548 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.141548 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=6.041 mas, bpa=-11.31 degrees ! Estimated noise=1.45111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000785863 Jy ! Component: 100 - total flux cleaned = -0.000865055 Jy ! Component: 150 - total flux cleaned = -0.000799434 Jy ! Component: 200 - total flux cleaned = -0.000831429 Jy ! Total flux subtracted in 200 components = -0.000831429 Jy ! Clean residual min=-0.004035 max=0.003885 Jy/beam ! Clean residual mean=0.000004 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.140716 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.140716 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.021 mas, bmaj=6.118 mas, bpa=-16.61 degrees ! Estimated noise=1.24891 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290549 Jy ! Component: 100 - total flux cleaned = 0.000500429 Jy ! Component: 150 - total flux cleaned = 0.00054363 Jy ! Component: 200 - total flux cleaned = 0.000584012 Jy ! Total flux subtracted in 200 components = 0.000584012 Jy ! Clean residual min=-0.003441 max=0.003649 Jy/beam ! Clean residual mean=0.000002 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.1413 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.1413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056188Jy sigma=0.896492 ! Fit after self-cal, rms=0.056192Jy sigma=0.896418 wmodel J2003-0421_X_2005_07_08_yyk\_map.mod ! Writing 64 model components to file: J2003-0421_X_2005_07_08_yyk_map.mod wobs J2003-0421_X_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J2003-0421_X_2005_07_08_yyk_uvs.fits wwins J2003-0421_X_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J2003-0421_X_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000825407 Jy ! Component: 100 - total flux cleaned = 0.00106922 Jy ! Component: 150 - total flux cleaned = 0.00107187 Jy ! Component: 200 - total flux cleaned = 0.000910853 Jy ! Component: 250 - total flux cleaned = 0.000508874 Jy ! Component: 300 - total flux cleaned = 0.000319539 Jy ! Component: 350 - total flux cleaned = 9.19236e-05 Jy ! Component: 400 - total flux cleaned = -0.00012532 Jy ! Component: 450 - total flux cleaned = -0.000457469 Jy ! Component: 500 - total flux cleaned = -0.000616968 Jy ! Component: 550 - total flux cleaned = -0.000694167 Jy ! Component: 600 - total flux cleaned = -0.00073156 Jy ! Component: 650 - total flux cleaned = -0.000804075 Jy ! Component: 700 - total flux cleaned = -0.000838352 Jy ! Component: 750 - total flux cleaned = -0.000838225 Jy ! Component: 800 - total flux cleaned = -0.0009043 Jy ! Component: 850 - total flux cleaned = -0.000872004 Jy ! Component: 900 - total flux cleaned = -0.000809293 Jy ! Component: 950 - total flux cleaned = -0.000778973 Jy ! Component: 1000 - total flux cleaned = -0.000748496 Jy ! Component: 1050 - total flux cleaned = -0.000689563 Jy ! Component: 1100 - total flux cleaned = -0.000689444 Jy ! Component: 1150 - total flux cleaned = -0.000632985 Jy ! Component: 1200 - total flux cleaned = -0.000605742 Jy ! Component: 1250 - total flux cleaned = -0.000633447 Jy ! Component: 1300 - total flux cleaned = -0.000660909 Jy ! Component: 1350 - total flux cleaned = -0.000661469 Jy ! Component: 1400 - total flux cleaned = -0.000818401 Jy ! Component: 1450 - total flux cleaned = -0.000895237 Jy ! Component: 1500 - total flux cleaned = -0.000792981 Jy ! Component: 1550 - total flux cleaned = -0.0007679 Jy ! Component: 1600 - total flux cleaned = -0.000767968 Jy ! Component: 1650 - total flux cleaned = -0.000743732 Jy ! Component: 1700 - total flux cleaned = -0.000840202 Jy ! Component: 1750 - total flux cleaned = -0.000815963 Jy ! Component: 1800 - total flux cleaned = -0.000815836 Jy ! Component: 1850 - total flux cleaned = -0.000815998 Jy ! Component: 1900 - total flux cleaned = -0.000885249 Jy ! Component: 1950 - total flux cleaned = -0.000976115 Jy ! Component: 2000 - total flux cleaned = -0.000998237 Jy ! Total flux subtracted in 2048 components = -0.00102039 Jy ! Clean residual min=-0.001303 max=0.001195 Jy/beam ! Clean residual mean=0.000004 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.14028 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 205 components and 0.14028 Jy ![Exited script file: muppet] wmap "J2003-0421_X_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.021 x 6.118 at -16.61 degrees (North through East) ! Clean map min=-0.0032584 max=0.10934 Jy/beam ! Writing clean map to FITS file: J2003-0421_X_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109336 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000443332 device "J2003-0421_X_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J2003-0421_X_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21643 1.21643 2.43287 4.86574 9.73148 19.463 38.9259 77.8518 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.021 x 6.118 at -16.61 degrees (North through East) ! Clean map min=-0.0032584 max=0.10934 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2003-0421_X_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J2003-0421_X_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2003-0421_X_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:57:20 2006