! Started logfile: J1945-0153_X_2005_07_09_yyk_uvs.log on Fri Jan 20 10:56:34 2006 obs J1945-0153_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J1945-0153_X_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.962222 visibilities/baseline/integration-bin. ! Found source: J1945-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1479 lines of history. ! ! Reading 1732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1945-0153_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.166001 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7017 mas, bmaj=1.807 mas, bpa=-1.325 degrees ! Estimated noise=1.12896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.129913 Jy ! Component: 100 - total flux cleaned = 0.153065 Jy ! Total flux subtracted in 100 components = 0.153065 Jy ! Clean residual min=-0.005666 max=0.007096 Jy/beam ! Clean residual mean=-0.000005 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 0.153065 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.153065 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.062896Jy sigma=1.098481 ! Fit after self-cal, rms=0.062725Jy sigma=1.094062 ! Inverting map and beam ! Estimated beam: bmin=0.7017 mas, bmaj=1.807 mas, bpa=-1.325 degrees ! Estimated noise=1.12896 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8684 mas, bmaj=2.127 mas, bpa=-1.769 degrees ! Estimated noise=0.869777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127586 Jy ! Component: 100 - total flux cleaned = 0.0179541 Jy ! Component: 150 - total flux cleaned = 0.0202914 Jy ! Component: 200 - total flux cleaned = 0.0211843 Jy ! Total flux subtracted in 200 components = 0.0211843 Jy ! Clean residual min=-0.003828 max=0.003836 Jy/beam ! Clean residual mean=-0.000012 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.174249 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 45 components and 0.174249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061391Jy sigma=1.056738 ! Fit after self-cal, rms=0.061387Jy sigma=1.056526 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8684 x 2.127 at -1.769 degrees (North through East) ! Clean map min=-0.0035817 max=0.15286 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01272 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.01 KP 0.98 ! LA 0.94 MK 1.01 NL 0.98 OV 1.01 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00752 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.01 KP 0.91 ! LA 1.01 MK 1.06 NL 0.99 OV 0.99 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0091 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.91 KP 0.89 ! LA 1.04 MK 1.01 NL 1.01 OV 1.06 ! PT 1.06 SC 0.91 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.061387Jy sigma=1.056526 ! Fit after self-cal, rms=0.060735Jy sigma=1.046013 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060735Jy sigma=1.046013 ! Fit after self-cal, rms=0.060735Jy sigma=1.046004 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8738 mas, bmaj=2.118 mas, bpa=-0.7889 degrees ! Estimated noise=0.869837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000932266 Jy ! Component: 100 - total flux cleaned = 0.000934696 Jy ! Component: 150 - total flux cleaned = 0.000932421 Jy ! Component: 200 - total flux cleaned = 0.000913686 Jy ! Total flux subtracted in 200 components = 0.000913686 Jy ! Clean residual min=-0.003738 max=0.003356 Jy/beam ! Clean residual mean=-0.000012 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.175163 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.175163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060704Jy sigma=1.045282 ! Fit after self-cal, rms=0.060699Jy sigma=1.045206 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060699Jy sigma=1.045206 ! Fit after self-cal, rms=0.058773Jy sigma=0.999029 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217125 Jy ! Component: 100 - total flux cleaned = 0.000373561 Jy ! Component: 150 - total flux cleaned = 0.000467097 Jy ! Component: 200 - total flux cleaned = 0.000524184 Jy ! Total flux subtracted in 200 components = 0.000524184 Jy ! Clean residual min=-0.003650 max=0.003252 Jy/beam ! Clean residual mean=-0.000012 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.175687 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.175687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058768Jy sigma=0.998557 ! Fit after self-cal, rms=0.058827Jy sigma=0.992411 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8738 x 2.118 at -0.7889 degrees (North through East) ! Clean map min=-0.0033053 max=0.15325 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058827Jy sigma=0.992411 ! Fit after self-cal, rms=0.058198Jy sigma=0.980905 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058198Jy sigma=0.980905 ! Fit after self-cal, rms=0.058301Jy sigma=0.980001 ! Inverting map and beam ! Estimated beam: bmin=0.8751 mas, bmaj=2.112 mas, bpa=-0.232 degrees ! Estimated noise=0.859252 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123335 Jy ! Component: 100 - total flux cleaned = -0.00130088 Jy ! Component: 150 - total flux cleaned = -0.0012333 Jy ! Component: 200 - total flux cleaned = -0.0011591 Jy ! Total flux subtracted in 200 components = -0.0011591 Jy ! Clean residual min=-0.003153 max=0.003036 Jy/beam ! Clean residual mean=-0.000006 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.174528 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.174528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058231Jy sigma=0.979286 ! Fit after self-cal, rms=0.058278Jy sigma=0.979138 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058278Jy sigma=0.979138 ! Fit after self-cal, rms=0.057589Jy sigma=0.972799 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057589Jy sigma=0.972799 ! Fit after self-cal, rms=0.057612Jy sigma=0.972749 ! Inverting map and beam ! Estimated beam: bmin=0.874 mas, bmaj=2.103 mas, bpa=0.1834 degrees ! Estimated noise=0.851368 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010092 Jy ! Component: 100 - total flux cleaned = -0.000991654 Jy ! Component: 150 - total flux cleaned = -0.000953347 Jy ! Component: 200 - total flux cleaned = -0.000987151 Jy ! Total flux subtracted in 200 components = -0.000987151 Jy ! Clean residual min=-0.003070 max=0.003104 Jy/beam ! Clean residual mean=-0.000008 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.173541 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.173541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057533Jy sigma=0.972062 ! Fit after self-cal, rms=0.057539Jy sigma=0.972039 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=3.625 mas, bpa=5.088 degrees ! Estimated noise=1.09383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129152 Jy ! Component: 100 - total flux cleaned = -0.000259295 Jy ! Component: 150 - total flux cleaned = -0.000347979 Jy ! Component: 200 - total flux cleaned = -0.000348235 Jy ! Total flux subtracted in 200 components = -0.000348235 Jy ! Clean residual min=-0.003305 max=0.002936 Jy/beam ! Clean residual mean=-0.000015 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.173193 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 70 components and 0.173193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057546Jy sigma=0.972296 ! Fit after self-cal, rms=0.057534Jy sigma=0.971880 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.705 mas, bmaj=1.802 mas, bpa=-0.5235 degrees ! Estimated noise=1.10835 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.128372 Jy ! Component: 100 - total flux cleaned = 0.152479 Jy ! Component: 150 - total flux cleaned = 0.16191 Jy ! Component: 200 - total flux cleaned = 0.166865 Jy ! Total flux subtracted in 200 components = 0.166865 Jy ! Clean residual min=-0.004148 max=0.004802 Jy/beam ! Clean residual mean=-0.000004 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.166865 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.166865 Jy ! Inverting map and beam ! Estimated beam: bmin=0.874 mas, bmaj=2.103 mas, bpa=0.1834 degrees ! Estimated noise=0.851368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393362 Jy ! Component: 100 - total flux cleaned = 0.00541097 Jy ! Component: 150 - total flux cleaned = 0.00588383 Jy ! Component: 200 - total flux cleaned = 0.00604084 Jy ! Total flux subtracted in 200 components = 0.00604084 Jy ! Clean residual min=-0.003102 max=0.003159 Jy/beam ! Clean residual mean=-0.000008 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.172905 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 47 components and 0.172905 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=3.625 mas, bpa=5.088 degrees ! Estimated noise=1.09383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238971 Jy ! Component: 100 - total flux cleaned = 0.000204603 Jy ! Component: 150 - total flux cleaned = 0.000201699 Jy ! Component: 200 - total flux cleaned = 0.000200535 Jy ! Total flux subtracted in 200 components = 0.000200535 Jy ! Clean residual min=-0.003272 max=0.002977 Jy/beam ! Clean residual mean=-0.000015 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.173106 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.173106 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.874 mas, bmaj=2.103 mas, bpa=0.1834 degrees ! Estimated noise=0.851368 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.85877e-05 Jy ! Component: 100 - total flux cleaned = 0.000129307 Jy ! Component: 150 - total flux cleaned = 0.000201272 Jy ! Component: 200 - total flux cleaned = 0.000215198 Jy ! Total flux subtracted in 200 components = 0.000215198 Jy ! Clean residual min=-0.003051 max=0.003100 Jy/beam ! Clean residual mean=-0.000008 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.173321 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.173321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057529Jy sigma=0.971911 ! Fit after self-cal, rms=0.057528Jy sigma=0.971874 wmodel J1945-0153_X_2005_07_09_yyk\_map.mod ! Writing 61 model components to file: J1945-0153_X_2005_07_09_yyk_map.mod wobs J1945-0153_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J1945-0153_X_2005_07_09_yyk_uvs.fits wwins J1945-0153_X_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J1945-0153_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169856 Jy ! Component: 100 - total flux cleaned = -0.000117038 Jy ! Component: 150 - total flux cleaned = -6.8029e-05 Jy ! Component: 200 - total flux cleaned = 2.54483e-05 Jy ! Component: 250 - total flux cleaned = 0.000340444 Jy ! Component: 300 - total flux cleaned = 0.000687087 Jy ! Component: 350 - total flux cleaned = 0.000897203 Jy ! Component: 400 - total flux cleaned = 0.00106172 Jy ! Component: 450 - total flux cleaned = 0.00110281 Jy ! Component: 500 - total flux cleaned = 0.00125883 Jy ! Component: 550 - total flux cleaned = 0.00133478 Jy ! Component: 600 - total flux cleaned = 0.00137141 Jy ! Component: 650 - total flux cleaned = 0.00140771 Jy ! Component: 700 - total flux cleaned = 0.00147944 Jy ! Component: 750 - total flux cleaned = 0.0014802 Jy ! Component: 800 - total flux cleaned = 0.00161864 Jy ! Component: 850 - total flux cleaned = 0.00175503 Jy ! Component: 900 - total flux cleaned = 0.00189006 Jy ! Component: 950 - total flux cleaned = 0.00218729 Jy ! Component: 1000 - total flux cleaned = 0.00231677 Jy ! Component: 1050 - total flux cleaned = 0.0024128 Jy ! Component: 1100 - total flux cleaned = 0.00260229 Jy ! Component: 1150 - total flux cleaned = 0.00272733 Jy ! Component: 1200 - total flux cleaned = 0.00272758 Jy ! Component: 1250 - total flux cleaned = 0.00278841 Jy ! Component: 1300 - total flux cleaned = 0.00287831 Jy ! Component: 1350 - total flux cleaned = 0.00293726 Jy ! Component: 1400 - total flux cleaned = 0.00290778 Jy ! Component: 1450 - total flux cleaned = 0.00290827 Jy ! Component: 1500 - total flux cleaned = 0.00287998 Jy ! Component: 1550 - total flux cleaned = 0.00299338 Jy ! Component: 1600 - total flux cleaned = 0.00304924 Jy ! Component: 1650 - total flux cleaned = 0.003077 Jy ! Component: 1700 - total flux cleaned = 0.00313162 Jy ! Component: 1750 - total flux cleaned = 0.00305008 Jy ! Component: 1800 - total flux cleaned = 0.00302326 Jy ! Component: 1850 - total flux cleaned = 0.00307584 Jy ! Component: 1900 - total flux cleaned = 0.00297076 Jy ! Component: 1950 - total flux cleaned = 0.00299676 Jy ! Component: 2000 - total flux cleaned = 0.00291937 Jy ! Total flux subtracted in 2048 components = 0.00299616 Jy ! Clean residual min=-0.001610 max=0.001761 Jy/beam ! Clean residual mean=-0.000007 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.176317 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 212 components and 0.176317 Jy ![Exited script file: muppet] wmap "J1945-0153_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.874 x 2.103 at 0.1834 degrees (North through East) ! Clean map min=-0.0023023 max=0.14976 Jy/beam ! Writing clean map to FITS file: J1945-0153_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.149757 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000477768 device "J1945-0153_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J1945-0153_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.957086 0.957086 1.91417 3.82834 7.65669 15.3134 30.6268 61.2535 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.149 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.874 x 2.103 at 0.1834 degrees (North through East) ! Clean map min=-0.0023023 max=0.14976 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1945-0153_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J1945-0153_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1945-0153_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:56:38 2006