! Started logfile: J1938-1749_S_2005_07_08_yyk_uvs.log on Fri Jan 20 10:55:55 2006 obs J1938-1749_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1938-1749_S_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.933333 visibilities/baseline/integration-bin. ! Found source: J1938-1749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1411 lines of history. ! ! Reading 1848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1938-1749_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.171308 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=6.854 mas, bpa=-2.607 degrees ! Estimated noise=1.49282 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.116211 Jy ! Component: 100 - total flux cleaned = 0.141272 Jy ! Total flux subtracted in 100 components = 0.141272 Jy ! Clean residual min=-0.010020 max=0.011882 Jy/beam ! Clean residual mean=0.000084 rms=0.002517 Jy/beam ! Combined flux in latest and established models = 0.141272 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.141272 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.097543Jy sigma=1.484331 ! Fit after self-cal, rms=0.099370Jy sigma=1.365188 ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=6.854 mas, bpa=-2.607 degrees ! Estimated noise=1.49282 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=8.803 mas, bpa=-6.191 degrees ! Estimated noise=0.980789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119062 Jy ! Component: 100 - total flux cleaned = 0.0168229 Jy ! Component: 150 - total flux cleaned = 0.0180719 Jy ! Component: 200 - total flux cleaned = 0.0182381 Jy ! Total flux subtracted in 200 components = 0.0182381 Jy ! Clean residual min=-0.008042 max=0.009550 Jy/beam ! Clean residual mean=-0.000006 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 0.15951 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.15951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098414Jy sigma=1.345000 ! Fit after self-cal, rms=0.098597Jy sigma=1.337436 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.294 x 8.803 at -6.191 degrees (North through East) ! Clean map min=-0.0076376 max=0.13089 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00452 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.08 KP 1.02 ! LA 1.01 MK 1.01 NL 0.92 OV 1.02 ! PT 1.01 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.972292 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.96 HN 1.14 KP 0.96 ! LA 0.92 MK 1.07 NL 1.00 OV 1.12 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.098597Jy sigma=1.337436 ! Fit after self-cal, rms=0.098529Jy sigma=1.331614 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098529Jy sigma=1.331614 ! Fit after self-cal, rms=0.098476Jy sigma=1.327412 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.634 mas, bpa=-4.939 degrees ! Estimated noise=0.977064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057284 Jy ! Component: 100 - total flux cleaned = 0.000323734 Jy ! Component: 150 - total flux cleaned = 0.000377021 Jy ! Component: 200 - total flux cleaned = 0.000375624 Jy ! Total flux subtracted in 200 components = 0.000375624 Jy ! Clean residual min=-0.007579 max=0.008239 Jy/beam ! Clean residual mean=-0.000028 rms=0.002480 Jy/beam ! Combined flux in latest and established models = 0.159885 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.159885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098457Jy sigma=1.326170 ! Fit after self-cal, rms=0.098340Jy sigma=1.322471 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098340Jy sigma=1.322471 ! Fit after self-cal, rms=0.090279Jy sigma=1.129950 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00556555 Jy ! Component: 100 - total flux cleaned = 0.00548549 Jy ! Component: 150 - total flux cleaned = 0.00533873 Jy ! Component: 200 - total flux cleaned = 0.00515793 Jy ! Total flux subtracted in 200 components = 0.00515793 Jy ! Clean residual min=-0.005181 max=0.005901 Jy/beam ! Clean residual mean=-0.000051 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.165043 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.165043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089957Jy sigma=1.123580 ! Fit after self-cal, rms=0.089225Jy sigma=1.111711 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 8.634 at -4.939 degrees (North through East) ! Clean map min=-0.0052032 max=0.13693 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089225Jy sigma=1.111711 ! Fit after self-cal, rms=0.090190Jy sigma=1.101267 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090190Jy sigma=1.101267 ! Fit after self-cal, rms=0.090064Jy sigma=1.099079 ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=8.684 mas, bpa=-5.373 degrees ! Estimated noise=0.999815 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451054 Jy ! Component: 100 - total flux cleaned = 0.0045173 Jy ! Component: 150 - total flux cleaned = 0.0045201 Jy ! Component: 200 - total flux cleaned = 0.00442044 Jy ! Total flux subtracted in 200 components = 0.00442044 Jy ! Clean residual min=-0.005310 max=0.005678 Jy/beam ! Clean residual mean=-0.000072 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.169464 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.169464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089927Jy sigma=1.095104 ! Fit after self-cal, rms=0.089896Jy sigma=1.094503 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089896Jy sigma=1.094503 ! Fit after self-cal, rms=0.090208Jy sigma=1.079823 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090208Jy sigma=1.079823 ! Fit after self-cal, rms=0.090218Jy sigma=1.079130 ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=8.635 mas, bpa=-5.253 degrees ! Estimated noise=0.997493 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274887 Jy ! Component: 100 - total flux cleaned = -0.000272426 Jy ! Component: 150 - total flux cleaned = -0.000268111 Jy ! Component: 200 - total flux cleaned = -0.00030756 Jy ! Total flux subtracted in 200 components = -0.00030756 Jy ! Clean residual min=-0.004468 max=0.005056 Jy/beam ! Clean residual mean=-0.000037 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.169156 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.169156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090181Jy sigma=1.078345 ! Fit after self-cal, rms=0.090174Jy sigma=1.078276 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.179 mas, bmaj=18.14 mas, bpa=1.674 degrees ! Estimated noise=1.24331 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192147 Jy ! Component: 100 - total flux cleaned = 0.00191687 Jy ! Component: 150 - total flux cleaned = 0.00191481 Jy ! Component: 200 - total flux cleaned = 0.00195241 Jy ! Total flux subtracted in 200 components = 0.00195241 Jy ! Clean residual min=-0.005702 max=0.005044 Jy/beam ! Clean residual mean=-0.000080 rms=0.001661 Jy/beam ! Combined flux in latest and established models = 0.171109 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.171109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090182Jy sigma=1.079601 ! Fit after self-cal, rms=0.090128Jy sigma=1.078749 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=6.795 mas, bpa=-2.301 degrees ! Estimated noise=1.52602 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.124805 Jy ! Component: 100 - total flux cleaned = 0.149037 Jy ! Component: 150 - total flux cleaned = 0.158317 Jy ! Component: 200 - total flux cleaned = 0.162256 Jy ! Total flux subtracted in 200 components = 0.162256 Jy ! Clean residual min=-0.006411 max=0.007257 Jy/beam ! Clean residual mean=0.000022 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 0.162256 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.162256 Jy ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=8.635 mas, bpa=-5.253 degrees ! Estimated noise=0.997493 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475097 Jy ! Component: 100 - total flux cleaned = 0.00522104 Jy ! Component: 150 - total flux cleaned = 0.00545423 Jy ! Component: 200 - total flux cleaned = 0.0055865 Jy ! Total flux subtracted in 200 components = 0.0055865 Jy ! Clean residual min=-0.004404 max=0.005447 Jy/beam ! Clean residual mean=-0.000034 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.167842 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 0.167842 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.179 mas, bmaj=18.14 mas, bpa=1.674 degrees ! Estimated noise=1.24331 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237035 Jy ! Component: 100 - total flux cleaned = 0.00242619 Jy ! Component: 150 - total flux cleaned = 0.00253423 Jy ! Component: 200 - total flux cleaned = 0.00263276 Jy ! Total flux subtracted in 200 components = 0.00263276 Jy ! Clean residual min=-0.005741 max=0.005433 Jy/beam ! Clean residual mean=-0.000077 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.170475 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.170475 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=8.635 mas, bpa=-5.253 degrees ! Estimated noise=0.997493 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158736 Jy ! Component: 100 - total flux cleaned = -0.00152271 Jy ! Component: 150 - total flux cleaned = -0.00152018 Jy ! Component: 200 - total flux cleaned = -0.00152016 Jy ! Total flux subtracted in 200 components = -0.00152016 Jy ! Clean residual min=-0.004295 max=0.005104 Jy/beam ! Clean residual mean=-0.000035 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.168955 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.168955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090059Jy sigma=1.076828 ! Fit after self-cal, rms=0.090054Jy sigma=1.076501 wmodel J1938-1749_S_2005_07_08_yyk\_map.mod ! Writing 41 model components to file: J1938-1749_S_2005_07_08_yyk_map.mod wobs J1938-1749_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1938-1749_S_2005_07_08_yyk_uvs.fits wwins J1938-1749_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J1938-1749_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144681 Jy ! Component: 100 - total flux cleaned = 0.00183645 Jy ! Component: 150 - total flux cleaned = 0.00176761 Jy ! Component: 200 - total flux cleaned = 0.00136041 Jy ! Component: 250 - total flux cleaned = 0.000971179 Jy ! Component: 300 - total flux cleaned = 0.00065978 Jy ! Component: 350 - total flux cleaned = 0.000420078 Jy ! Component: 400 - total flux cleaned = 0.000534798 Jy ! Component: 450 - total flux cleaned = 0.000479242 Jy ! Component: 500 - total flux cleaned = 0.000641654 Jy ! Component: 550 - total flux cleaned = 0.000693788 Jy ! Component: 600 - total flux cleaned = 0.000743528 Jy ! Component: 650 - total flux cleaned = 0.000594344 Jy ! Component: 700 - total flux cleaned = 0.000498465 Jy ! Component: 750 - total flux cleaned = 0.00040479 Jy ! Component: 800 - total flux cleaned = 0.000170907 Jy ! Component: 850 - total flux cleaned = -0.000195117 Jy ! Component: 900 - total flux cleaned = -0.000419154 Jy ! Component: 950 - total flux cleaned = -0.000770978 Jy ! Component: 1000 - total flux cleaned = -0.000814306 Jy ! Component: 1050 - total flux cleaned = -0.00119761 Jy ! Component: 1100 - total flux cleaned = -0.00132368 Jy ! Component: 1150 - total flux cleaned = -0.00157106 Jy ! Component: 1200 - total flux cleaned = -0.00165226 Jy ! Component: 1250 - total flux cleaned = -0.0020142 Jy ! Component: 1300 - total flux cleaned = -0.00225123 Jy ! Component: 1350 - total flux cleaned = -0.00240761 Jy ! Component: 1400 - total flux cleaned = -0.00248528 Jy ! Component: 1450 - total flux cleaned = -0.0027906 Jy ! Component: 1500 - total flux cleaned = -0.00312934 Jy ! Component: 1550 - total flux cleaned = -0.00331539 Jy ! Component: 1600 - total flux cleaned = -0.003609 Jy ! Component: 1650 - total flux cleaned = -0.00371798 Jy ! Component: 1700 - total flux cleaned = -0.00411204 Jy ! Component: 1750 - total flux cleaned = -0.00418188 Jy ! Component: 1800 - total flux cleaned = -0.00442659 Jy ! Component: 1850 - total flux cleaned = -0.00463422 Jy ! Component: 1900 - total flux cleaned = -0.00497742 Jy ! Component: 1950 - total flux cleaned = -0.00535025 Jy ! Component: 2000 - total flux cleaned = -0.00558514 Jy ! Total flux subtracted in 2048 components = -0.005851 Jy ! Clean residual min=-0.002380 max=0.001676 Jy/beam ! Clean residual mean=-0.000057 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.163104 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 176 components and 0.163104 Jy ![Exited script file: muppet] wmap "J1938-1749_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.294 x 8.635 at -5.253 degrees (North through East) ! Clean map min=-0.0030713 max=0.14253 Jy/beam ! Writing clean map to FITS file: J1938-1749_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142528 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000689651 device "J1938-1749_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1938-1749_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.45161 1.45161 2.90322 5.80644 11.6129 23.2258 46.4515 92.9031 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.294 x 8.635 at -5.253 degrees (North through East) ! Clean map min=-0.0030713 max=0.14253 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1938-1749_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1938-1749_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1938-1749_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:55:59 2006