! Started logfile: J1733-1304_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:49:10 2006
obs J1733-1304_S_2005_07_09_yyk_uve.fits
! Reading UV FITS file: J1733-1304_S_2005_07_09_yyk_uve.fits
! AN table 1: 3 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1733-1304
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1601 lines of history.
! 
! Reading 540 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1733-1304_S_2005_07_09_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 2.50074 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.578 mas, bmaj=6.513 mas, bpa=-1.472 degrees
! Estimated noise=2.44611 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.93094 Jy
! Component: 100  -  total flux cleaned = 2.53442 Jy
! Total flux subtracted in 100 components = 2.53442 Jy
! Clean residual min=-0.125358 max=0.291955 Jy/beam
! Clean residual mean=0.000084 rms=0.053514 Jy/beam
! Combined flux in latest and established models = 2.53442 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 2.53442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.674293Jy  sigma=11.039210
! Fit after  self-cal, rms=0.671894Jy  sigma=10.985828
! Inverting map and beam 
! Estimated beam: bmin=2.578 mas, bmaj=6.513 mas, bpa=-1.472 degrees
! Estimated noise=2.44611 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.972 mas, bmaj=7.932 mas, bpa=-3.273 degrees
! Estimated noise=1.9877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.4059 Jy
! Component: 100  -  total flux cleaned = 0.590922 Jy
! Component: 150  -  total flux cleaned = 0.679878 Jy
! Component: 200  -  total flux cleaned = 0.70622 Jy
! Total flux subtracted in 200 components = 0.70622 Jy
! Clean residual min=-0.118681 max=0.347280 Jy/beam
! Clean residual mean=0.000921 rms=0.050665 Jy/beam
! Combined flux in latest and established models = 3.24064 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 54 components and 3.24064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.489892Jy  sigma=8.015393
! Fit after  self-cal, rms=0.489294Jy  sigma=8.002614
! Inverting map 
! Added new window around map position (0, 22.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.356816 Jy
! Component: 100  -  total flux cleaned = 0.483017 Jy
! Component: 150  -  total flux cleaned = 0.538406 Jy
! Component: 200  -  total flux cleaned = 0.569142 Jy
! Total flux subtracted in 200 components = 0.569142 Jy
! Clean residual min=-0.085707 max=0.080444 Jy/beam
! Clean residual mean=-0.000359 rms=0.021318 Jy/beam
! Combined flux in latest and established models = 3.80978 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 53 model components to the UV plane model.
! The established model now contains 107 components and 3.80978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.285460Jy  sigma=4.514804
! Fit after  self-cal, rms=0.260738Jy  sigma=4.119132
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.972 x 7.932 at -3.273 degrees (North through East)
! Clean map  min=-0.06835  max=2.192 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01937
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.01     KP        0.93     
!   LA        1.03     MK        0.87     NL        0.95     OV        1.01     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.990233
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.05     HN        1.04     KP        0.96     
!   LA        1.00     MK        0.93     NL        0.97     OV        1.06     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.994329
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     HN        1.02     KP        0.96     
!   LA        0.91     MK        1.01     NL        1.05     OV        1.07     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.03544
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.90     KP        0.85     
!   LA        1.00*    MK        1.02     NL        0.98     OV        0.90     
!   PT        0.95     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.260738Jy  sigma=4.119132
! Fit after  self-cal, rms=0.183262Jy  sigma=2.903511
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183262Jy  sigma=2.903511
! Fit after  self-cal, rms=0.183373Jy  sigma=2.903270
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.939 mas, bmaj=7.944 mas, bpa=-4.088 degrees
! Estimated noise=1.9884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0743618 Jy
! Component: 100  -  total flux cleaned = 0.116823 Jy
! Component: 150  -  total flux cleaned = 0.145726 Jy
! Component: 200  -  total flux cleaned = 0.157815 Jy
! Total flux subtracted in 200 components = 0.157815 Jy
! Clean residual min=-0.030436 max=0.041444 Jy/beam
! Clean residual mean=-0.000055 rms=0.010529 Jy/beam
! Combined flux in latest and established models = 3.96759 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 140 components and 3.96759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160220Jy  sigma=2.480528
! Fit after  self-cal, rms=0.154313Jy  sigma=2.403997
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154313Jy  sigma=2.403997
! Fit after  self-cal, rms=0.152166Jy  sigma=2.378170
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0327774 Jy
! Component: 100  -  total flux cleaned = 0.0429188 Jy
! Component: 150  -  total flux cleaned = 0.0476911 Jy
! Component: 200  -  total flux cleaned = 0.0482019 Jy
! Total flux subtracted in 200 components = 0.0482019 Jy
! Clean residual min=-0.028830 max=0.033978 Jy/beam
! Clean residual mean=-0.000158 rms=0.009157 Jy/beam
! Combined flux in latest and established models = 4.0158 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 164 components and 4.0158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146308Jy  sigma=2.275477
! Fit after  self-cal, rms=0.144443Jy  sigma=2.253514
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.939 x 7.944 at -4.088 degrees (North through East)
! Clean map  min=-0.028038  max=2.194 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144443Jy  sigma=2.253514
! Fit after  self-cal, rms=0.107403Jy  sigma=1.642159
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107403Jy  sigma=1.642159
! Fit after  self-cal, rms=0.107383Jy  sigma=1.642011
! Inverting map and beam 
! Estimated beam: bmin=2.943 mas, bmaj=7.939 mas, bpa=-4.168 degrees
! Estimated noise=1.97893 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.027003 Jy
! Component: 100  -  total flux cleaned = 0.0331382 Jy
! Component: 150  -  total flux cleaned = 0.0349203 Jy
! Component: 200  -  total flux cleaned = 0.0363515 Jy
! Total flux subtracted in 200 components = 0.0363515 Jy
! Clean residual min=-0.024943 max=0.026428 Jy/beam
! Clean residual mean=0.000029 rms=0.006988 Jy/beam
! Combined flux in latest and established models = 4.05215 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 179 components and 4.05215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099978Jy  sigma=1.501560
! Fit after  self-cal, rms=0.097848Jy  sigma=1.473976
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097848Jy  sigma=1.473976
! Fit after  self-cal, rms=0.095731Jy  sigma=1.450840
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095731Jy  sigma=1.450840
! Fit after  self-cal, rms=0.095721Jy  sigma=1.450831
! Inverting map and beam 
! Estimated beam: bmin=2.947 mas, bmaj=7.94 mas, bpa=-4.157 degrees
! Estimated noise=1.97754 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162646 Jy
! Component: 100  -  total flux cleaned = 0.020095 Jy
! Component: 150  -  total flux cleaned = 0.020983 Jy
! Component: 200  -  total flux cleaned = 0.0224645 Jy
! Total flux subtracted in 200 components = 0.0224645 Jy
! Clean residual min=-0.022845 max=0.024597 Jy/beam
! Clean residual mean=0.000025 rms=0.006143 Jy/beam
! Combined flux in latest and established models = 4.07461 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 190 components and 4.07461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091792Jy  sigma=1.373946
! Fit after  self-cal, rms=0.090682Jy  sigma=1.360070
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.524 mas, bmaj=15.62 mas, bpa=0.004559 degrees
! Estimated noise=2.60698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175023 Jy
! Component: 100  -  total flux cleaned = 0.022554 Jy
! Component: 150  -  total flux cleaned = 0.0251048 Jy
! Component: 200  -  total flux cleaned = 0.0263322 Jy
! Total flux subtracted in 200 components = 0.0263322 Jy
! Clean residual min=-0.023545 max=0.026785 Jy/beam
! Clean residual mean=-0.000040 rms=0.007395 Jy/beam
! Combined flux in latest and established models = 4.10094 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 205 components and 4.10094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090960Jy  sigma=1.351662
! Fit after  self-cal, rms=0.090112Jy  sigma=1.339370
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.568 mas, bmaj=6.513 mas, bpa=-2.002 degrees
! Estimated noise=2.4209 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.91985 Jy
! Component: 100  -  total flux cleaned = 2.53097 Jy
! Component: 150  -  total flux cleaned = 2.9088 Jy
! Component: 200  -  total flux cleaned = 3.16803 Jy
! Total flux subtracted in 200 components = 3.16803 Jy
! Clean residual min=-0.065768 max=0.111359 Jy/beam
! Clean residual mean=0.000306 rms=0.028823 Jy/beam
! Combined flux in latest and established models = 3.16803 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 48 model components to the UV plane model.
! The established model now contains 48 components and 3.16803 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.947 mas, bmaj=7.94 mas, bpa=-4.157 degrees
! Estimated noise=1.97754 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.27556 Jy
! Component: 100  -  total flux cleaned = 0.453887 Jy
! Component: 150  -  total flux cleaned = 0.576896 Jy
! Component: 200  -  total flux cleaned = 0.665042 Jy
! Total flux subtracted in 200 components = 0.665042 Jy
! Clean residual min=-0.029899 max=0.041218 Jy/beam
! Clean residual mean=0.000219 rms=0.012868 Jy/beam
! Combined flux in latest and established models = 3.83307 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 127 components and 3.83307 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.524 mas, bmaj=15.62 mas, bpa=0.004559 degrees
! Estimated noise=2.60698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.10946 Jy
! Component: 100  -  total flux cleaned = 0.170169 Jy
! Component: 150  -  total flux cleaned = 0.207249 Jy
! Component: 200  -  total flux cleaned = 0.230273 Jy
! Total flux subtracted in 200 components = 0.230273 Jy
! Clean residual min=-0.020938 max=0.027186 Jy/beam
! Clean residual mean=0.000036 rms=0.007400 Jy/beam
! Combined flux in latest and established models = 4.06334 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 183 components and 4.06334 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.947 mas, bmaj=7.94 mas, bpa=-4.157 degrees
! Estimated noise=1.97754 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220456 Jy
! Component: 100  -  total flux cleaned = 0.00139072 Jy
! Component: 150  -  total flux cleaned = 0.0034921 Jy
! Component: 200  -  total flux cleaned = 0.00525275 Jy
! Total flux subtracted in 200 components = 0.00525275 Jy
! Clean residual min=-0.017783 max=0.026063 Jy/beam
! Clean residual mean=0.000002 rms=0.006064 Jy/beam
! Combined flux in latest and established models = 4.0686 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 197 components and 4.0686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093881Jy  sigma=1.405080
! Fit after  self-cal, rms=0.092565Jy  sigma=1.381594
wmodel J1733-1304_S_2005_07_09_yyk\_map.mod
! Writing 197 model components to file: J1733-1304_S_2005_07_09_yyk_map.mod
wobs J1733-1304_S_2005_07_09_yyk\_uvs.fits
! Writing UV FITS file: J1733-1304_S_2005_07_09_yyk_uvs.fits
wwins J1733-1304_S_2005_07_09_yyk\_map.win
! wwins: Wrote 2 windows to J1733-1304_S_2005_07_09_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110091 Jy
! Component: 100  -  total flux cleaned = 0.0188898 Jy
! Component: 150  -  total flux cleaned = 0.0240386 Jy
! Component: 200  -  total flux cleaned = 0.0303229 Jy
! Component: 250  -  total flux cleaned = 0.0342977 Jy
! Component: 300  -  total flux cleaned = 0.0383666 Jy
! Component: 350  -  total flux cleaned = 0.0407145 Jy
! Component: 400  -  total flux cleaned = 0.0434596 Jy
! Component: 450  -  total flux cleaned = 0.044892 Jy
! Component: 500  -  total flux cleaned = 0.0465015 Jy
! Component: 550  -  total flux cleaned = 0.0473924 Jy
! Component: 600  -  total flux cleaned = 0.047824 Jy
! Component: 650  -  total flux cleaned = 0.0484459 Jy
! Component: 700  -  total flux cleaned = 0.0486467 Jy
! Component: 750  -  total flux cleaned = 0.0490267 Jy
! Component: 800  -  total flux cleaned = 0.0492095 Jy
! Component: 850  -  total flux cleaned = 0.049388 Jy
! Component: 900  -  total flux cleaned = 0.0495637 Jy
! Component: 950  -  total flux cleaned = 0.0495671 Jy
! Component: 1000  -  total flux cleaned = 0.0503993 Jy
! Component: 1050  -  total flux cleaned = 0.0505604 Jy
! Component: 1100  -  total flux cleaned = 0.051659 Jy
! Component: 1150  -  total flux cleaned = 0.0521155 Jy
! Component: 1200  -  total flux cleaned = 0.0525575 Jy
! Component: 1250  -  total flux cleaned = 0.052846 Jy
! Component: 1300  -  total flux cleaned = 0.0531336 Jy
! Component: 1350  -  total flux cleaned = 0.054095 Jy
! Component: 1400  -  total flux cleaned = 0.054627 Jy
! Component: 1450  -  total flux cleaned = 0.055146 Jy
! Component: 1500  -  total flux cleaned = 0.0556509 Jy
! Component: 1550  -  total flux cleaned = 0.0561446 Jy
! Component: 1600  -  total flux cleaned = 0.056264 Jy
! Component: 1650  -  total flux cleaned = 0.056617 Jy
! Component: 1700  -  total flux cleaned = 0.0565046 Jy
! Component: 1750  -  total flux cleaned = 0.0565094 Jy
! Component: 1800  -  total flux cleaned = 0.0567305 Jy
! Component: 1850  -  total flux cleaned = 0.0567322 Jy
! Component: 1900  -  total flux cleaned = 0.0568364 Jy
! Component: 1950  -  total flux cleaned = 0.0569395 Jy
! Component: 2000  -  total flux cleaned = 0.0569367 Jy
! Total flux subtracted in 2048 components = 0.0568399 Jy
! Clean residual min=-0.004876 max=0.005114 Jy/beam
! Clean residual mean=0.000001 rms=0.001990 Jy/beam
! Combined flux in latest and established models = 4.12544 Jy
keep
! Adding 150 model components to the UV plane model.
! The established model now contains 347 components and 4.12544 Jy
![Exited script file: muppet]
wmap "J1733-1304_S_2005_07_09_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.947 x 7.94 at -4.157 degrees (North through East)
! Clean map  min=-0.015833  max=2.2315 Jy/beam
! Writing clean map to FITS file: J1733-1304_S_2005_07_09_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.23146 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00196332 
device "J1733-1304_S_2005_07_09_yyk\_map.eps/VPS"
! Attempting to open device: 'J1733-1304_S_2005_07_09_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.26395 0.26395 0.527901 1.0558 2.1116 4.22321 8.44641 16.8928 33.7857 67.5713
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0058 
print "peak=",int(peak_flux*1000)/1000
! peak= 2.231 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.947 x 7.94 at -4.157 degrees (North through East)
! Clean map  min=-0.015833  max=2.2315 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1733-1304_S_2005_07_09_yyk\_map.gif/gif"
! Attempting to open device: 'J1733-1304_S_2005_07_09_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1733-1304_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:49:14 2006