! Started logfile: J1718-2850_S_2005_07_20_yyk_uvs.log on Fri Jan 20 10:47:48 2006 obs J1718-2850_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J1718-2850_S_2005_07_20_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.937778 visibilities/baseline/integration-bin. ! Found source: J1718-2850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1527 lines of history. ! ! Reading 1688 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1718-2850_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.194949 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=7.446 mas, bpa=9.728 degrees ! Estimated noise=2.60901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.105799 Jy ! Component: 100 - total flux cleaned = 0.151531 Jy ! Total flux subtracted in 100 components = 0.151531 Jy ! Clean residual min=-0.013557 max=0.025476 Jy/beam ! Clean residual mean=-0.000323 rms=0.004631 Jy/beam ! Combined flux in latest and established models = 0.151531 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.151531 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.126555Jy sigma=1.349882 ! Fit after self-cal, rms=0.125968Jy sigma=1.342687 ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=7.446 mas, bpa=9.728 degrees ! Estimated noise=2.60901 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.354 mas, bmaj=13.49 mas, bpa=15.07 degrees ! Estimated noise=1.45881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441632 Jy ! Component: 100 - total flux cleaned = 0.0583952 Jy ! Component: 150 - total flux cleaned = 0.0625427 Jy ! Component: 200 - total flux cleaned = 0.0631704 Jy ! Total flux subtracted in 200 components = 0.0631704 Jy ! Clean residual min=-0.008555 max=0.012240 Jy/beam ! Clean residual mean=-0.000073 rms=0.002913 Jy/beam ! Combined flux in latest and established models = 0.214701 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 73 components and 0.214701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118117Jy sigma=1.171279 ! Fit after self-cal, rms=0.118117Jy sigma=1.170919 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.354 x 13.49 at 15.07 degrees (North through East) ! Clean map min=-0.0085289 max=0.13344 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.118117Jy sigma=1.170919 ! Fit after self-cal, rms=0.118117Jy sigma=1.170919 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118117Jy sigma=1.170919 ! Fit after self-cal, rms=0.118118Jy sigma=1.170918 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.354 mas, bmaj=13.49 mas, bpa=15.07 degrees ! Estimated noise=1.45881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327284 Jy ! Component: 100 - total flux cleaned = 0.000897838 Jy ! Component: 150 - total flux cleaned = 0.00142351 Jy ! Component: 200 - total flux cleaned = 0.0019163 Jy ! Total flux subtracted in 200 components = 0.0019163 Jy ! Clean residual min=-0.008565 max=0.011724 Jy/beam ! Clean residual mean=-0.000078 rms=0.002804 Jy/beam ! Combined flux in latest and established models = 0.216618 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.216618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117669Jy sigma=1.167220 ! Fit after self-cal, rms=0.117675Jy sigma=1.167112 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117675Jy sigma=1.167112 ! Fit after self-cal, rms=0.111942Jy sigma=1.103311 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.002958 Jy ! Component: 100 - total flux cleaned = 0.00330975 Jy ! Component: 150 - total flux cleaned = 0.00373198 Jy ! Component: 200 - total flux cleaned = 0.00402231 Jy ! Total flux subtracted in 200 components = 0.00402231 Jy ! Clean residual min=-0.007136 max=0.009999 Jy/beam ! Clean residual mean=-0.000093 rms=0.002565 Jy/beam ! Combined flux in latest and established models = 0.22064 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.22064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111693Jy sigma=1.100074 ! Fit after self-cal, rms=0.111091Jy sigma=1.094187 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.354 x 13.49 at 15.07 degrees (North through East) ! Clean map min=-0.0068634 max=0.1312 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111091Jy sigma=1.094187 ! Fit after self-cal, rms=0.111091Jy sigma=1.094187 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111091Jy sigma=1.094187 ! Fit after self-cal, rms=0.111031Jy sigma=1.093546 ! Inverting map and beam ! Estimated beam: bmin=4.354 mas, bmaj=13.49 mas, bpa=15.07 degrees ! Estimated noise=1.45881 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423034 Jy ! Component: 100 - total flux cleaned = 0.000701683 Jy ! Component: 150 - total flux cleaned = 0.000875559 Jy ! Component: 200 - total flux cleaned = 0.00103412 Jy ! Total flux subtracted in 200 components = 0.00103412 Jy ! Clean residual min=-0.006983 max=0.009247 Jy/beam ! Clean residual mean=-0.000096 rms=0.002499 Jy/beam ! Combined flux in latest and established models = 0.221674 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 80 components and 0.221674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110893Jy sigma=1.091745 ! Fit after self-cal, rms=0.110833Jy sigma=1.091428 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110833Jy sigma=1.091428 ! Fit after self-cal, rms=0.111027Jy sigma=1.087589 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111027Jy sigma=1.087589 ! Fit after self-cal, rms=0.111030Jy sigma=1.087496 ! Inverting map and beam ! Estimated beam: bmin=4.4 mas, bmaj=13.56 mas, bpa=15.05 degrees ! Estimated noise=1.45102 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152865 Jy ! Component: 100 - total flux cleaned = -0.00146124 Jy ! Component: 150 - total flux cleaned = -0.00132993 Jy ! Component: 200 - total flux cleaned = -0.0011438 Jy ! Total flux subtracted in 200 components = -0.0011438 Jy ! Clean residual min=-0.007089 max=0.007998 Jy/beam ! Clean residual mean=-0.000118 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 0.22053 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.22053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110935Jy sigma=1.086139 ! Fit after self-cal, rms=0.110912Jy sigma=1.085961 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.603 mas, bmaj=26.58 mas, bpa=7.556 degrees ! Estimated noise=1.62754 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174498 Jy ! Component: 100 - total flux cleaned = 0.00191435 Jy ! Component: 150 - total flux cleaned = 0.0020741 Jy ! Component: 200 - total flux cleaned = 0.00230165 Jy ! Total flux subtracted in 200 components = 0.00230165 Jy ! Clean residual min=-0.006980 max=0.007753 Jy/beam ! Clean residual mean=-0.000187 rms=0.002705 Jy/beam ! Combined flux in latest and established models = 0.222832 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 85 components and 0.222832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110873Jy sigma=1.085468 ! Fit after self-cal, rms=0.110860Jy sigma=1.085306 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.451 mas, bpa=9.671 degrees ! Estimated noise=2.60969 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.112181 Jy ! Component: 100 - total flux cleaned = 0.160202 Jy ! Component: 150 - total flux cleaned = 0.185683 Jy ! Component: 200 - total flux cleaned = 0.199804 Jy ! Total flux subtracted in 200 components = 0.199804 Jy ! Clean residual min=-0.010964 max=0.013738 Jy/beam ! Clean residual mean=-0.000207 rms=0.003439 Jy/beam ! Combined flux in latest and established models = 0.199804 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.199804 Jy ! Inverting map and beam ! Estimated beam: bmin=4.4 mas, bmaj=13.56 mas, bpa=15.05 degrees ! Estimated noise=1.45102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128484 Jy ! Component: 100 - total flux cleaned = 0.0165139 Jy ! Component: 150 - total flux cleaned = 0.0170164 Jy ! Component: 200 - total flux cleaned = 0.0174863 Jy ! Total flux subtracted in 200 components = 0.0174863 Jy ! Clean residual min=-0.007055 max=0.008659 Jy/beam ! Clean residual mean=-0.000109 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 0.21729 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.21729 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.603 mas, bmaj=26.58 mas, bpa=7.556 degrees ! Estimated noise=1.62754 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298915 Jy ! Component: 100 - total flux cleaned = 0.00320147 Jy ! Component: 150 - total flux cleaned = 0.00339838 Jy ! Component: 200 - total flux cleaned = 0.00369014 Jy ! Total flux subtracted in 200 components = 0.00369014 Jy ! Clean residual min=-0.007213 max=0.008401 Jy/beam ! Clean residual mean=-0.000177 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 0.220981 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 65 components and 0.220981 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.4 mas, bmaj=13.56 mas, bpa=15.05 degrees ! Estimated noise=1.45102 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166058 Jy ! Component: 100 - total flux cleaned = -0.00130014 Jy ! Component: 150 - total flux cleaned = -0.00105186 Jy ! Component: 200 - total flux cleaned = -0.000751741 Jy ! Total flux subtracted in 200 components = -0.000751741 Jy ! Clean residual min=-0.007058 max=0.007851 Jy/beam ! Clean residual mean=-0.000117 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 0.220229 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.220229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110983Jy sigma=1.086012 ! Fit after self-cal, rms=0.110987Jy sigma=1.085835 wmodel J1718-2850_S_2005_07_20_yyk\_map.mod ! Writing 68 model components to file: J1718-2850_S_2005_07_20_yyk_map.mod wobs J1718-2850_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J1718-2850_S_2005_07_20_yyk_uvs.fits wwins J1718-2850_S_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J1718-2850_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315568 Jy ! Component: 100 - total flux cleaned = 0.00492102 Jy ! Component: 150 - total flux cleaned = 0.00653033 Jy ! Component: 200 - total flux cleaned = 0.00761289 Jy ! Component: 250 - total flux cleaned = 0.00863158 Jy ! Component: 300 - total flux cleaned = 0.00940391 Jy ! Component: 350 - total flux cleaned = 0.00986719 Jy ! Component: 400 - total flux cleaned = 0.0105719 Jy ! Component: 450 - total flux cleaned = 0.0109954 Jy ! Component: 500 - total flux cleaned = 0.011574 Jy ! Component: 550 - total flux cleaned = 0.0122945 Jy ! Component: 600 - total flux cleaned = 0.0126068 Jy ! Component: 650 - total flux cleaned = 0.0130615 Jy ! Component: 700 - total flux cleaned = 0.0133553 Jy ! Component: 750 - total flux cleaned = 0.0135704 Jy ! Component: 800 - total flux cleaned = 0.0136406 Jy ! Component: 850 - total flux cleaned = 0.0137788 Jy ! Component: 900 - total flux cleaned = 0.0139145 Jy ! Component: 950 - total flux cleaned = 0.0140457 Jy ! Component: 1000 - total flux cleaned = 0.0140461 Jy ! Component: 1050 - total flux cleaned = 0.0141087 Jy ! Component: 1100 - total flux cleaned = 0.0139841 Jy ! Component: 1150 - total flux cleaned = 0.0139844 Jy ! Component: 1200 - total flux cleaned = 0.014044 Jy ! Component: 1250 - total flux cleaned = 0.0138691 Jy ! Component: 1300 - total flux cleaned = 0.01387 Jy ! Component: 1350 - total flux cleaned = 0.0137005 Jy ! Component: 1400 - total flux cleaned = 0.0135348 Jy ! Component: 1450 - total flux cleaned = 0.0132073 Jy ! Component: 1500 - total flux cleaned = 0.0129931 Jy ! Component: 1550 - total flux cleaned = 0.0126761 Jy ! Component: 1600 - total flux cleaned = 0.0124682 Jy ! Component: 1650 - total flux cleaned = 0.01211 Jy ! Component: 1700 - total flux cleaned = 0.0120083 Jy ! Component: 1750 - total flux cleaned = 0.0117096 Jy ! Component: 1800 - total flux cleaned = 0.0112198 Jy ! Component: 1850 - total flux cleaned = 0.0108823 Jy ! Component: 1900 - total flux cleaned = 0.0105961 Jy ! Component: 1950 - total flux cleaned = 0.0102666 Jy ! Component: 2000 - total flux cleaned = 0.00984908 Jy ! Total flux subtracted in 2048 components = 0.00962068 Jy ! Clean residual min=-0.002740 max=0.002777 Jy/beam ! Clean residual mean=-0.000099 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.22985 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 194 components and 0.22985 Jy ![Exited script file: muppet] wmap "J1718-2850_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.4 x 13.56 at 15.05 degrees (North through East) ! Clean map min=-0.0048949 max=0.12918 Jy/beam ! Writing clean map to FITS file: J1718-2850_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129176 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00101836 device "J1718-2850_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J1718-2850_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.36504 2.36504 4.73008 9.46016 18.9203 37.8407 75.6813 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.4 x 13.56 at 15.05 degrees (North through East) ! Clean map min=-0.0048949 max=0.12918 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1718-2850_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J1718-2850_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1718-2850_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 10:47:52 2006