! Started logfile: J1701-1903_X_2005_07_08_yyk_uvs.log on Fri Jan 20 10:46:31 2006 obs J1701-1903_X_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1701-1903_X_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.947475 visibilities/baseline/integration-bin. ! Found source: J1701-1903 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1407 lines of history. ! ! Reading 1876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1701-1903_X_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.161688 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6546 mas, bmaj=1.675 mas, bpa=0.4302 degrees ! Estimated noise=1.56672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115082 Jy ! Component: 100 - total flux cleaned = 0.134158 Jy ! Total flux subtracted in 100 components = 0.134158 Jy ! Clean residual min=-0.009421 max=0.009458 Jy/beam ! Clean residual mean=-0.000032 rms=0.002272 Jy/beam ! Combined flux in latest and established models = 0.134158 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.134158 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.091351Jy sigma=1.592474 ! Fit after self-cal, rms=0.074599Jy sigma=1.237355 ! Inverting map and beam ! Estimated beam: bmin=0.6545 mas, bmaj=1.674 mas, bpa=0.3628 degrees ! Estimated noise=1.56635 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.905 mas, bmaj=2.212 mas, bpa=-0.6721 degrees ! Estimated noise=1.0524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.017772 Jy ! Component: 100 - total flux cleaned = 0.0228044 Jy ! Component: 150 - total flux cleaned = 0.0244774 Jy ! Component: 200 - total flux cleaned = 0.024676 Jy ! Total flux subtracted in 200 components = 0.024676 Jy ! Clean residual min=-0.004584 max=0.005260 Jy/beam ! Clean residual mean=0.000019 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.158834 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.158834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072362Jy sigma=1.177980 ! Fit after self-cal, rms=0.072362Jy sigma=1.177877 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.905 x 2.212 at -0.6721 degrees (North through East) ! Clean map min=-0.0040263 max=0.14385 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03209 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.00* KP 0.95 ! LA 0.99 MK 0.92 NL 0.97 OV 1.05 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02043 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00* KP 0.89 ! LA 0.99 MK 0.99 NL 1.00 OV 0.98 ! PT 1.06 SC 0.88 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.072362Jy sigma=1.177877 ! Fit after self-cal, rms=0.071702Jy sigma=1.170319 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071702Jy sigma=1.170319 ! Fit after self-cal, rms=0.071695Jy sigma=1.170254 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8849 mas, bmaj=2.167 mas, bpa=0.05625 degrees ! Estimated noise=1.0517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177488 Jy ! Component: 100 - total flux cleaned = 0.00200688 Jy ! Component: 150 - total flux cleaned = 0.00219399 Jy ! Component: 200 - total flux cleaned = 0.00238301 Jy ! Total flux subtracted in 200 components = 0.00238301 Jy ! Clean residual min=-0.004174 max=0.004675 Jy/beam ! Clean residual mean=0.000017 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.161217 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.161217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071517Jy sigma=1.168637 ! Fit after self-cal, rms=0.071506Jy sigma=1.168598 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071506Jy sigma=1.168598 ! Fit after self-cal, rms=0.058340Jy sigma=0.984283 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223748 Jy ! Component: 100 - total flux cleaned = 0.00195755 Jy ! Component: 150 - total flux cleaned = 0.00185965 Jy ! Component: 200 - total flux cleaned = 0.00178494 Jy ! Total flux subtracted in 200 components = 0.00178494 Jy ! Clean residual min=-0.003679 max=0.004023 Jy/beam ! Clean residual mean=0.000022 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.163002 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.163002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058238Jy sigma=0.980797 ! Fit after self-cal, rms=0.056364Jy sigma=0.963390 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8849 x 2.167 at 0.05625 degrees (North through East) ! Clean map min=-0.0033738 max=0.14741 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056364Jy sigma=0.963390 ! Fit after self-cal, rms=0.054550Jy sigma=0.935313 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054550Jy sigma=0.935313 ! Fit after self-cal, rms=0.054243Jy sigma=0.932674 ! Inverting map and beam ! Estimated beam: bmin=0.8852 mas, bmaj=2.159 mas, bpa=0.6275 degrees ! Estimated noise=1.03642 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137615 Jy ! Component: 100 - total flux cleaned = -0.00152893 Jy ! Component: 150 - total flux cleaned = -0.00155972 Jy ! Component: 200 - total flux cleaned = -0.00157382 Jy ! Total flux subtracted in 200 components = -0.00157382 Jy ! Clean residual min=-0.003224 max=0.003761 Jy/beam ! Clean residual mean=-0.000009 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.161428 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.161428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054215Jy sigma=0.932130 ! Fit after self-cal, rms=0.054132Jy sigma=0.931405 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054132Jy sigma=0.931405 ! Fit after self-cal, rms=0.053554Jy sigma=0.912601 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053554Jy sigma=0.912601 ! Fit after self-cal, rms=0.053548Jy sigma=0.912294 ! Inverting map and beam ! Estimated beam: bmin=0.8899 mas, bmaj=2.165 mas, bpa=0.9786 degrees ! Estimated noise=1.03195 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000754557 Jy ! Component: 100 - total flux cleaned = -0.00078971 Jy ! Component: 150 - total flux cleaned = -0.000815207 Jy ! Component: 200 - total flux cleaned = -0.000815237 Jy ! Total flux subtracted in 200 components = -0.000815237 Jy ! Clean residual min=-0.003234 max=0.003578 Jy/beam ! Clean residual mean=-0.000007 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.160613 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.160613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053531Jy sigma=0.911964 ! Fit after self-cal, rms=0.053523Jy sigma=0.911831 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.536 mas, bmaj=5.171 mas, bpa=6.896 degrees ! Estimated noise=1.29408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163037 Jy ! Component: 100 - total flux cleaned = -0.000164407 Jy ! Component: 150 - total flux cleaned = -0.000191135 Jy ! Component: 200 - total flux cleaned = -0.000192264 Jy ! Total flux subtracted in 200 components = -0.000192264 Jy ! Clean residual min=-0.002948 max=0.003550 Jy/beam ! Clean residual mean=-0.000013 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.160421 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 48 components and 0.160421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053537Jy sigma=0.911996 ! Fit after self-cal, rms=0.053532Jy sigma=0.911915 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6503 mas, bmaj=1.665 mas, bpa=1.024 degrees ! Estimated noise=1.53228 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.1235 Jy ! Component: 100 - total flux cleaned = 0.143985 Jy ! Component: 150 - total flux cleaned = 0.152777 Jy ! Component: 200 - total flux cleaned = 0.15741 Jy ! Total flux subtracted in 200 components = 0.15741 Jy ! Clean residual min=-0.004949 max=0.005501 Jy/beam ! Clean residual mean=-0.000010 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.157411 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.157411 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8899 mas, bmaj=2.165 mas, bpa=0.9786 degrees ! Estimated noise=1.03195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236926 Jy ! Component: 100 - total flux cleaned = 0.00280521 Jy ! Component: 150 - total flux cleaned = 0.00286852 Jy ! Component: 200 - total flux cleaned = 0.00288628 Jy ! Total flux subtracted in 200 components = 0.00288628 Jy ! Clean residual min=-0.003319 max=0.003468 Jy/beam ! Clean residual mean=-0.000008 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.160297 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.160297 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.536 mas, bmaj=5.171 mas, bpa=6.896 degrees ! Estimated noise=1.29408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.46635e-05 Jy ! Component: 100 - total flux cleaned = -6.5477e-05 Jy ! Component: 150 - total flux cleaned = -6.63316e-05 Jy ! Component: 200 - total flux cleaned = -6.70073e-05 Jy ! Total flux subtracted in 200 components = -6.70073e-05 Jy ! Clean residual min=-0.002982 max=0.003561 Jy/beam ! Clean residual mean=-0.000013 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.16023 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 30 components and 0.16023 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8899 mas, bmaj=2.165 mas, bpa=0.9786 degrees ! Estimated noise=1.03195 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.2456e-05 Jy ! Component: 100 - total flux cleaned = 1.30041e-05 Jy ! Component: 150 - total flux cleaned = 3.08284e-05 Jy ! Component: 200 - total flux cleaned = 4.82171e-05 Jy ! Total flux subtracted in 200 components = 4.82171e-05 Jy ! Clean residual min=-0.003282 max=0.003508 Jy/beam ! Clean residual mean=-0.000008 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.160278 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.160278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053543Jy sigma=0.912026 ! Fit after self-cal, rms=0.053535Jy sigma=0.911971 wmodel J1701-1903_X_2005_07_08_yyk\_map.mod ! Writing 34 model components to file: J1701-1903_X_2005_07_08_yyk_map.mod wobs J1701-1903_X_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1701-1903_X_2005_07_08_yyk_uvs.fits wwins J1701-1903_X_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J1701-1903_X_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000876381 Jy ! Component: 100 - total flux cleaned = 0.00148888 Jy ! Component: 150 - total flux cleaned = 0.00185292 Jy ! Component: 200 - total flux cleaned = 0.0022497 Jy ! Component: 250 - total flux cleaned = 0.00258351 Jy ! Component: 300 - total flux cleaned = 0.00304505 Jy ! Component: 350 - total flux cleaned = 0.00340287 Jy ! Component: 400 - total flux cleaned = 0.00370471 Jy ! Component: 450 - total flux cleaned = 0.00395665 Jy ! Component: 500 - total flux cleaned = 0.00424304 Jy ! Component: 550 - total flux cleaned = 0.00448182 Jy ! Component: 600 - total flux cleaned = 0.00471452 Jy ! Component: 650 - total flux cleaned = 0.00482748 Jy ! Component: 700 - total flux cleaned = 0.00486459 Jy ! Component: 750 - total flux cleaned = 0.00497425 Jy ! Component: 800 - total flux cleaned = 0.00504534 Jy ! Component: 850 - total flux cleaned = 0.00497576 Jy ! Component: 900 - total flux cleaned = 0.00490755 Jy ! Component: 950 - total flux cleaned = 0.00467317 Jy ! Component: 1000 - total flux cleaned = 0.00473901 Jy ! Component: 1050 - total flux cleaned = 0.00460907 Jy ! Component: 1100 - total flux cleaned = 0.00451302 Jy ! Component: 1150 - total flux cleaned = 0.00445023 Jy ! Component: 1200 - total flux cleaned = 0.00451271 Jy ! Component: 1250 - total flux cleaned = 0.00445135 Jy ! Component: 1300 - total flux cleaned = 0.00454259 Jy ! Component: 1350 - total flux cleaned = 0.00454286 Jy ! Component: 1400 - total flux cleaned = 0.00463153 Jy ! Component: 1450 - total flux cleaned = 0.00469015 Jy ! Component: 1500 - total flux cleaned = 0.00477625 Jy ! Component: 1550 - total flux cleaned = 0.00480494 Jy ! Component: 1600 - total flux cleaned = 0.00480507 Jy ! Component: 1650 - total flux cleaned = 0.00491596 Jy ! Component: 1700 - total flux cleaned = 0.00494386 Jy ! Component: 1750 - total flux cleaned = 0.00510652 Jy ! Component: 1800 - total flux cleaned = 0.00518638 Jy ! Component: 1850 - total flux cleaned = 0.00521297 Jy ! Component: 1900 - total flux cleaned = 0.00534361 Jy ! Component: 1950 - total flux cleaned = 0.00542123 Jy ! Component: 2000 - total flux cleaned = 0.00547233 Jy ! Total flux subtracted in 2048 components = 0.00559886 Jy ! Clean residual min=-0.001271 max=0.001396 Jy/beam ! Clean residual mean=-0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.165877 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 171 components and 0.165877 Jy ![Exited script file: muppet] wmap "J1701-1903_X_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8899 x 2.165 at 0.9786 degrees (North through East) ! Clean map min=-0.0022153 max=0.1464 Jy/beam ! Writing clean map to FITS file: J1701-1903_X_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.1464 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00047882 device "J1701-1903_X_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1701-1903_X_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.98119 0.98119 1.96238 3.92476 7.84952 15.699 31.3981 62.7962 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.146 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8899 x 2.165 at 0.9786 degrees (North through East) ! Clean map min=-0.0022153 max=0.1464 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1701-1903_X_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1701-1903_X_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1701-1903_X_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:46:35 2006