! Started logfile: J1640-0011_S_2005_07_08_yyk_uvs.log on Fri Jan 20 10:44:32 2006 obs J1640-0011_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1640-0011_S_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1640-0011 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1640-0011_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.146747 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.573 mas, bmaj=6.866 mas, bpa=-2.175 degrees ! Estimated noise=1.23988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.106956 Jy ! Component: 100 - total flux cleaned = 0.126673 Jy ! Total flux subtracted in 100 components = 0.126673 Jy ! Clean residual min=-0.005067 max=0.005558 Jy/beam ! Clean residual mean=-0.000022 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.126673 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.126673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078315Jy sigma=1.090553 ! Fit after self-cal, rms=0.077898Jy sigma=1.084511 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.741 mas, bpa=-2.62 degrees ! Estimated noise=0.914761 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00734798 Jy ! Component: 100 - total flux cleaned = 0.00917884 Jy ! Component: 150 - total flux cleaned = 0.00951099 Jy ! Component: 200 - total flux cleaned = 0.00976466 Jy ! Total flux subtracted in 200 components = 0.00976466 Jy ! Clean residual min=-0.003488 max=0.003572 Jy/beam ! Clean residual mean=-0.000030 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.136438 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.136438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077592Jy sigma=1.073527 ! Fit after self-cal, rms=0.077564Jy sigma=1.073201 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 7.741 at -2.62 degrees (North through East) ! Clean map min=-0.0034144 max=0.1252 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.977316 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.16 KP 0.98 ! LA 0.96 MK 1.07 NL 0.99 OV 1.05 ! PT 1.08 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.077564Jy sigma=1.073201 ! Fit after self-cal, rms=0.077466Jy sigma=1.070547 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077466Jy sigma=1.070547 ! Fit after self-cal, rms=0.077455Jy sigma=1.070302 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.709 mas, bpa=-2.037 degrees ! Estimated noise=0.912394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.20859e-05 Jy ! Component: 100 - total flux cleaned = 4.82651e-05 Jy ! Component: 150 - total flux cleaned = 1.55841e-05 Jy ! Component: 200 - total flux cleaned = 1.56012e-05 Jy ! Total flux subtracted in 200 components = 1.56012e-05 Jy ! Clean residual min=-0.003565 max=0.003239 Jy/beam ! Clean residual mean=-0.000029 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.136454 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.136454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077393Jy sigma=1.069684 ! Fit after self-cal, rms=0.077382Jy sigma=1.069443 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077382Jy sigma=1.069443 ! Fit after self-cal, rms=0.073222Jy sigma=1.011562 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103563 Jy ! Component: 100 - total flux cleaned = 0.00109269 Jy ! Component: 150 - total flux cleaned = 0.00111473 Jy ! Component: 200 - total flux cleaned = 0.00111476 Jy ! Total flux subtracted in 200 components = 0.00111476 Jy ! Clean residual min=-0.003322 max=0.003219 Jy/beam ! Clean residual mean=-0.000029 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.137568 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.137568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073213Jy sigma=1.011150 ! Fit after self-cal, rms=0.072693Jy sigma=1.005759 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 7.709 at -2.037 degrees (North through East) ! Clean map min=-0.0031656 max=0.12584 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072693Jy sigma=1.005759 ! Fit after self-cal, rms=0.073408Jy sigma=0.997446 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073408Jy sigma=0.997446 ! Fit after self-cal, rms=0.073352Jy sigma=0.996544 ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=7.639 mas, bpa=-1.529 degrees ! Estimated noise=0.92306 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229026 Jy ! Component: 100 - total flux cleaned = 0.00306518 Jy ! Component: 150 - total flux cleaned = 0.00310841 Jy ! Component: 200 - total flux cleaned = 0.00310805 Jy ! Total flux subtracted in 200 components = 0.00310805 Jy ! Clean residual min=-0.002773 max=0.003184 Jy/beam ! Clean residual mean=-0.000016 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.140676 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 59 components and 0.140676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073289Jy sigma=0.995383 ! Fit after self-cal, rms=0.073287Jy sigma=0.995169 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073287Jy sigma=0.995169 ! Fit after self-cal, rms=0.072266Jy sigma=0.983596 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072266Jy sigma=0.983596 ! Fit after self-cal, rms=0.072264Jy sigma=0.983457 ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.683 mas, bpa=-1.412 degrees ! Estimated noise=0.926889 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207286 Jy ! Component: 100 - total flux cleaned = 0.000181876 Jy ! Component: 150 - total flux cleaned = 0.000213501 Jy ! Component: 200 - total flux cleaned = 0.000213748 Jy ! Total flux subtracted in 200 components = 0.000213748 Jy ! Clean residual min=-0.002845 max=0.003020 Jy/beam ! Clean residual mean=-0.000004 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.14089 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.14089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072268Jy sigma=0.983184 ! Fit after self-cal, rms=0.072273Jy sigma=0.983150 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.896 mas, bmaj=12.76 mas, bpa=6.991 degrees ! Estimated noise=1.19125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118668 Jy ! Component: 100 - total flux cleaned = 9.70776e-05 Jy ! Component: 150 - total flux cleaned = 7.99952e-05 Jy ! Component: 200 - total flux cleaned = 6.57178e-05 Jy ! Total flux subtracted in 200 components = 6.57178e-05 Jy ! Clean residual min=-0.003651 max=0.002975 Jy/beam ! Clean residual mean=-0.000003 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.140956 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 67 components and 0.140956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072255Jy sigma=0.983226 ! Fit after self-cal, rms=0.072260Jy sigma=0.983127 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.584 mas, bmaj=6.857 mas, bpa=-1.665 degrees ! Estimated noise=1.25186 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.109972 Jy ! Component: 100 - total flux cleaned = 0.129673 Jy ! Component: 150 - total flux cleaned = 0.137529 Jy ! Component: 200 - total flux cleaned = 0.141159 Jy ! Total flux subtracted in 200 components = 0.141159 Jy ! Clean residual min=-0.004586 max=0.004472 Jy/beam ! Clean residual mean=-0.000017 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.141159 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.141159 Jy ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.683 mas, bpa=-1.412 degrees ! Estimated noise=0.926889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132766 Jy ! Component: 100 - total flux cleaned = 4.71043e-05 Jy ! Component: 150 - total flux cleaned = 4.60025e-05 Jy ! Component: 200 - total flux cleaned = 1.22367e-05 Jy ! Total flux subtracted in 200 components = 1.22367e-05 Jy ! Clean residual min=-0.002779 max=0.003051 Jy/beam ! Clean residual mean=-0.000004 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.141171 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.141171 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.896 mas, bmaj=12.76 mas, bpa=6.991 degrees ! Estimated noise=1.19125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.67266e-05 Jy ! Component: 100 - total flux cleaned = -0.000180085 Jy ! Component: 150 - total flux cleaned = -0.000264364 Jy ! Component: 200 - total flux cleaned = -0.000295921 Jy ! Total flux subtracted in 200 components = -0.000295921 Jy ! Clean residual min=-0.003652 max=0.002959 Jy/beam ! Clean residual mean=-0.000002 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.140875 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.140875 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.683 mas, bpa=-1.412 degrees ! Estimated noise=0.926889 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.76413e-05 Jy ! Component: 100 - total flux cleaned = 5.96073e-05 Jy ! Component: 150 - total flux cleaned = 3.1492e-05 Jy ! Component: 200 - total flux cleaned = 7.02525e-06 Jy ! Total flux subtracted in 200 components = 7.02525e-06 Jy ! Clean residual min=-0.002771 max=0.002987 Jy/beam ! Clean residual mean=-0.000004 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.140882 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.140882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072276Jy sigma=0.983502 ! Fit after self-cal, rms=0.072270Jy sigma=0.983433 wmodel J1640-0011_S_2005_07_08_yyk\_map.mod ! Writing 45 model components to file: J1640-0011_S_2005_07_08_yyk_map.mod wobs J1640-0011_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1640-0011_S_2005_07_08_yyk_uvs.fits wwins J1640-0011_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J1640-0011_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936006 Jy ! Component: 100 - total flux cleaned = 0.00158594 Jy ! Component: 150 - total flux cleaned = 0.00201552 Jy ! Component: 200 - total flux cleaned = 0.00228922 Jy ! Component: 250 - total flux cleaned = 0.00237699 Jy ! Component: 300 - total flux cleaned = 0.00246211 Jy ! Component: 350 - total flux cleaned = 0.00250363 Jy ! Component: 400 - total flux cleaned = 0.0026243 Jy ! Component: 450 - total flux cleaned = 0.00262501 Jy ! Component: 500 - total flux cleaned = 0.00262587 Jy ! Component: 550 - total flux cleaned = 0.0026635 Jy ! Component: 600 - total flux cleaned = 0.00269979 Jy ! Component: 650 - total flux cleaned = 0.00280719 Jy ! Component: 700 - total flux cleaned = 0.0028426 Jy ! Component: 750 - total flux cleaned = 0.0029475 Jy ! Component: 800 - total flux cleaned = 0.00308476 Jy ! Component: 850 - total flux cleaned = 0.00315194 Jy ! Component: 900 - total flux cleaned = 0.00315221 Jy ! Component: 950 - total flux cleaned = 0.00328214 Jy ! Component: 1000 - total flux cleaned = 0.00321866 Jy ! Component: 1050 - total flux cleaned = 0.00337613 Jy ! Component: 1100 - total flux cleaned = 0.00331361 Jy ! Component: 1150 - total flux cleaned = 0.0032831 Jy ! Component: 1200 - total flux cleaned = 0.00331353 Jy ! Component: 1250 - total flux cleaned = 0.00331385 Jy ! Component: 1300 - total flux cleaned = 0.00348914 Jy ! Component: 1350 - total flux cleaned = 0.00337355 Jy ! Component: 1400 - total flux cleaned = 0.00340265 Jy ! Component: 1450 - total flux cleaned = 0.00345888 Jy ! Component: 1500 - total flux cleaned = 0.0035426 Jy ! Component: 1550 - total flux cleaned = 0.0035435 Jy ! Component: 1600 - total flux cleaned = 0.00362487 Jy ! Component: 1650 - total flux cleaned = 0.00367885 Jy ! Component: 1700 - total flux cleaned = 0.0037847 Jy ! Component: 1750 - total flux cleaned = 0.00383698 Jy ! Component: 1800 - total flux cleaned = 0.00386291 Jy ! Component: 1850 - total flux cleaned = 0.00386273 Jy ! Component: 1900 - total flux cleaned = 0.00381241 Jy ! Component: 1950 - total flux cleaned = 0.00388761 Jy ! Component: 2000 - total flux cleaned = 0.00383781 Jy ! Total flux subtracted in 2048 components = 0.00378891 Jy ! Clean residual min=-0.001341 max=0.001433 Jy/beam ! Clean residual mean=0.000003 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.144671 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 187 components and 0.144671 Jy ![Exited script file: muppet] wmap "J1640-0011_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.683 at -1.412 degrees (North through East) ! Clean map min=-0.0024879 max=0.12844 Jy/beam ! Writing clean map to FITS file: J1640-0011_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128439 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000512462 device "J1640-0011_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1640-0011_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19698 1.19698 2.39395 4.7879 9.57581 19.1516 38.3032 76.6065 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.683 at -1.412 degrees (North through East) ! Clean map min=-0.0024879 max=0.12844 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1640-0011_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1640-0011_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1640-0011_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:44:36 2006