! Started logfile: J1633-2557_X_2005_07_20_yyk_uvs.log on Fri Jan 20 10:44:10 2006 obs J1633-2557_X_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J1633-2557_X_2005_07_20_yyk_uve.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.909524 visibilities/baseline/integration-bin. ! Found source: J1633-2557 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1488 lines of history. ! ! Reading 2292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1633-2557_X_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.131115 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6894 mas, bmaj=1.824 mas, bpa=0.1511 degrees ! Estimated noise=1.71146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.075906 Jy ! Component: 100 - total flux cleaned = 0.102108 Jy ! Total flux subtracted in 100 components = 0.102108 Jy ! Clean residual min=-0.008724 max=0.015840 Jy/beam ! Clean residual mean=-0.000025 rms=0.002528 Jy/beam ! Combined flux in latest and established models = 0.102108 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.102108 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.086491Jy sigma=1.170407 ! Fit after self-cal, rms=0.084497Jy sigma=1.143681 ! Inverting map and beam ! Estimated beam: bmin=0.6893 mas, bmaj=1.824 mas, bpa=0.1611 degrees ! Estimated noise=1.7111 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9764 mas, bmaj=2.471 mas, bpa=-0.6668 degrees ! Estimated noise=0.98087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220596 Jy ! Component: 100 - total flux cleaned = 0.027198 Jy ! Component: 150 - total flux cleaned = 0.0274013 Jy ! Component: 200 - total flux cleaned = 0.0274945 Jy ! Total flux subtracted in 200 components = 0.0274945 Jy ! Clean residual min=-0.005165 max=0.006268 Jy/beam ! Clean residual mean=0.000041 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.129602 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.129602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082315Jy sigma=1.065858 ! Fit after self-cal, rms=0.082301Jy sigma=1.065833 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9764 x 2.471 at -0.6668 degrees (North through East) ! Clean map min=-0.0050032 max=0.10087 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.082301Jy sigma=1.065833 ! Fit after self-cal, rms=0.082301Jy sigma=1.065833 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082301Jy sigma=1.065833 ! Fit after self-cal, rms=0.082300Jy sigma=1.065833 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9764 mas, bmaj=2.471 mas, bpa=-0.6668 degrees ! Estimated noise=0.98087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.64721e-06 Jy ! Component: 100 - total flux cleaned = 7.91393e-05 Jy ! Component: 150 - total flux cleaned = 0.000154731 Jy ! Component: 200 - total flux cleaned = 0.000231003 Jy ! Total flux subtracted in 200 components = 0.000231003 Jy ! Clean residual min=-0.005127 max=0.006074 Jy/beam ! Clean residual mean=0.000041 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 0.129833 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.129833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082177Jy sigma=1.063877 ! Fit after self-cal, rms=0.082166Jy sigma=1.063868 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082166Jy sigma=1.063868 ! Fit after self-cal, rms=0.075771Jy sigma=0.990675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188094 Jy ! Component: 100 - total flux cleaned = 0.00168005 Jy ! Component: 150 - total flux cleaned = 0.00166934 Jy ! Component: 200 - total flux cleaned = 0.00166231 Jy ! Total flux subtracted in 200 components = 0.00166231 Jy ! Clean residual min=-0.005068 max=0.005772 Jy/beam ! Clean residual mean=0.000041 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.131496 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.131496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075739Jy sigma=0.986532 ! Fit after self-cal, rms=0.074427Jy sigma=0.978553 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9764 x 2.471 at -0.6668 degrees (North through East) ! Clean map min=-0.0048592 max=0.10527 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074427Jy sigma=0.978553 ! Fit after self-cal, rms=0.073673Jy sigma=0.974226 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073673Jy sigma=0.974226 ! Fit after self-cal, rms=0.073442Jy sigma=0.972760 ! Inverting map and beam ! Estimated beam: bmin=0.975 mas, bmaj=2.475 mas, bpa=-0.7136 degrees ! Estimated noise=0.978975 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160913 Jy ! Component: 100 - total flux cleaned = 0.00022521 Jy ! Component: 150 - total flux cleaned = 0.000283529 Jy ! Component: 200 - total flux cleaned = 0.000335962 Jy ! Total flux subtracted in 200 components = 0.000335962 Jy ! Clean residual min=-0.004596 max=0.005418 Jy/beam ! Clean residual mean=0.000039 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.131832 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.131832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073360Jy sigma=0.971480 ! Fit after self-cal, rms=0.073326Jy sigma=0.971119 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073326Jy sigma=0.971119 ! Fit after self-cal, rms=0.073030Jy sigma=0.966760 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073030Jy sigma=0.966760 ! Fit after self-cal, rms=0.073040Jy sigma=0.966431 ! Inverting map and beam ! Estimated beam: bmin=0.9688 mas, bmaj=2.445 mas, bpa=-1.274 degrees ! Estimated noise=0.968008 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000470895 Jy ! Component: 100 - total flux cleaned = -0.000472223 Jy ! Component: 150 - total flux cleaned = -0.000514755 Jy ! Component: 200 - total flux cleaned = -0.000515594 Jy ! Total flux subtracted in 200 components = -0.000515594 Jy ! Clean residual min=-0.004122 max=0.004838 Jy/beam ! Clean residual mean=0.000026 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.131316 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.131316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072981Jy sigma=0.965768 ! Fit after self-cal, rms=0.072985Jy sigma=0.965712 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=6.171 mas, bpa=5.413 degrees ! Estimated noise=1.16921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157285 Jy ! Component: 100 - total flux cleaned = 0.000158664 Jy ! Component: 150 - total flux cleaned = 0.000155234 Jy ! Component: 200 - total flux cleaned = 0.000151465 Jy ! Total flux subtracted in 200 components = 0.000151465 Jy ! Clean residual min=-0.004165 max=0.005617 Jy/beam ! Clean residual mean=0.000048 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.131468 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.131468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072974Jy sigma=0.965556 ! Fit after self-cal, rms=0.072967Jy sigma=0.965487 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6876 mas, bmaj=1.818 mas, bpa=-0.04619 degrees ! Estimated noise=1.69122 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0854079 Jy ! Component: 100 - total flux cleaned = 0.109223 Jy ! Component: 150 - total flux cleaned = 0.119496 Jy ! Component: 200 - total flux cleaned = 0.12478 Jy ! Total flux subtracted in 200 components = 0.12478 Jy ! Clean residual min=-0.007256 max=0.007490 Jy/beam ! Clean residual mean=-0.000000 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 0.12478 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.12478 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9688 mas, bmaj=2.445 mas, bpa=-1.274 degrees ! Estimated noise=0.968008 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.2, 11.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00714262 Jy ! Component: 100 - total flux cleaned = 0.00917198 Jy ! Component: 150 - total flux cleaned = 0.00969048 Jy ! Component: 200 - total flux cleaned = 0.00983611 Jy ! Total flux subtracted in 200 components = 0.00983611 Jy ! Clean residual min=-0.004112 max=0.005145 Jy/beam ! Clean residual mean=0.000014 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.134616 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 55 components and 0.134616 Jy ! Inverting map ! Added new window around map position (13.2, 9.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555115 Jy ! Component: 100 - total flux cleaned = 0.00713608 Jy ! Component: 150 - total flux cleaned = 0.00812131 Jy ! Component: 200 - total flux cleaned = 0.00876238 Jy ! Total flux subtracted in 200 components = 0.00876238 Jy ! Clean residual min=-0.004459 max=0.003791 Jy/beam ! Clean residual mean=0.000012 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.143379 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 75 components and 0.143379 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=6.171 mas, bpa=5.413 degrees ! Estimated noise=1.16921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152344 Jy ! Component: 100 - total flux cleaned = 0.00187771 Jy ! Component: 150 - total flux cleaned = 0.00213807 Jy ! Component: 200 - total flux cleaned = 0.00236968 Jy ! Total flux subtracted in 200 components = 0.00236968 Jy ! Clean residual min=-0.003551 max=0.004128 Jy/beam ! Clean residual mean=0.000025 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.145748 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.145748 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9688 mas, bmaj=2.445 mas, bpa=-1.274 degrees ! Estimated noise=0.968008 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00087521 Jy ! Component: 100 - total flux cleaned = -0.000880308 Jy ! Component: 150 - total flux cleaned = -0.000993512 Jy ! Component: 200 - total flux cleaned = -0.000943268 Jy ! Total flux subtracted in 200 components = -0.000943268 Jy ! Clean residual min=-0.004378 max=0.003777 Jy/beam ! Clean residual mean=0.000013 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.144805 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 95 components and 0.144805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072536Jy sigma=0.954326 ! Fit after self-cal, rms=0.072519Jy sigma=0.952983 wmodel J1633-2557_X_2005_07_20_yyk\_map.mod ! Writing 95 model components to file: J1633-2557_X_2005_07_20_yyk_map.mod wobs J1633-2557_X_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J1633-2557_X_2005_07_20_yyk_uvs.fits wwins J1633-2557_X_2005_07_20_yyk\_map.win ! wwins: Wrote 3 windows to J1633-2557_X_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000558448 Jy ! Component: 100 - total flux cleaned = -0.000616421 Jy ! Component: 150 - total flux cleaned = -0.000788639 Jy ! Component: 200 - total flux cleaned = -0.000954089 Jy ! Component: 250 - total flux cleaned = -0.000742526 Jy ! Component: 300 - total flux cleaned = -0.0006411 Jy ! Component: 350 - total flux cleaned = -0.000642399 Jy ! Component: 400 - total flux cleaned = -0.000446978 Jy ! Component: 450 - total flux cleaned = -0.000254881 Jy ! Component: 500 - total flux cleaned = -0.00016063 Jy ! Component: 550 - total flux cleaned = -6.95237e-05 Jy ! Component: 600 - total flux cleaned = -0.000158855 Jy ! Component: 650 - total flux cleaned = -0.000114323 Jy ! Component: 700 - total flux cleaned = -2.80931e-05 Jy ! Component: 750 - total flux cleaned = 1.45774e-05 Jy ! Component: 800 - total flux cleaned = 9.76183e-05 Jy ! Component: 850 - total flux cleaned = 9.72024e-05 Jy ! Component: 900 - total flux cleaned = 9.70357e-05 Jy ! Component: 950 - total flux cleaned = 1.7896e-05 Jy ! Component: 1000 - total flux cleaned = 5.72737e-05 Jy ! Component: 1050 - total flux cleaned = 0.000171863 Jy ! Component: 1100 - total flux cleaned = 5.8255e-05 Jy ! Component: 1150 - total flux cleaned = 2.09932e-05 Jy ! Component: 1200 - total flux cleaned = -5.23724e-05 Jy ! Component: 1250 - total flux cleaned = -1.62493e-05 Jy ! Component: 1300 - total flux cleaned = -8.84665e-05 Jy ! Component: 1350 - total flux cleaned = -1.74411e-05 Jy ! Component: 1400 - total flux cleaned = -1.77692e-05 Jy ! Component: 1450 - total flux cleaned = -5.22063e-05 Jy ! Component: 1500 - total flux cleaned = 5.08388e-05 Jy ! Component: 1550 - total flux cleaned = 5.01098e-05 Jy ! Component: 1600 - total flux cleaned = 1.60753e-05 Jy ! Component: 1650 - total flux cleaned = 4.93259e-05 Jy ! Component: 1700 - total flux cleaned = 0.00021409 Jy ! Component: 1750 - total flux cleaned = 0.000214234 Jy ! Component: 1800 - total flux cleaned = 0.000311184 Jy ! Component: 1850 - total flux cleaned = 0.000279165 Jy ! Component: 1900 - total flux cleaned = 0.000342627 Jy ! Component: 1950 - total flux cleaned = 0.000499829 Jy ! Component: 2000 - total flux cleaned = 0.000592993 Jy ! Total flux subtracted in 2048 components = 0.000562085 Jy ! Clean residual min=-0.001656 max=0.001767 Jy/beam ! Clean residual mean=0.000001 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.145367 Jy keep ! Adding 110 model components to the UV plane model. ! The established model now contains 205 components and 0.145367 Jy ![Exited script file: muppet] wmap "J1633-2557_X_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9688 x 2.445 at -1.274 degrees (North through East) ! Clean map min=-0.003526 max=0.10327 Jy/beam ! Writing clean map to FITS file: J1633-2557_X_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.103265 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000578057 device "J1633-2557_X_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J1633-2557_X_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.67933 1.67933 3.35867 6.71734 13.4347 26.8694 53.7387 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9688 x 2.445 at -1.274 degrees (North through East) ! Clean map min=-0.003526 max=0.10327 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1633-2557_X_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J1633-2557_X_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1633-2557_X_2005_07_20_yyk_uvs.log closed on Fri Jan 20 10:44:15 2006