! Started logfile: J1625-2527_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:43:12 2006 obs J1625-2527_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J1625-2527_S_2005_07_09_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.804444 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1625-2527_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.15175 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.102 mas, bpa=-7.486 degrees ! Estimated noise=2.51704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.94452 Jy ! Component: 100 - total flux cleaned = 1.1399 Jy ! Total flux subtracted in 100 components = 1.1399 Jy ! Clean residual min=-0.035085 max=0.059902 Jy/beam ! Clean residual mean=-0.000402 rms=0.011703 Jy/beam ! Combined flux in latest and established models = 1.13989 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.13989 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.175041Jy sigma=2.453371 ! Fit after self-cal, rms=0.174906Jy sigma=2.450002 ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.102 mas, bpa=-7.486 degrees ! Estimated noise=2.51704 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=8.134 mas, bpa=-6.74 degrees ! Estimated noise=1.89777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.103433 Jy ! Component: 100 - total flux cleaned = 0.142418 Jy ! Component: 150 - total flux cleaned = 0.157709 Jy ! Component: 200 - total flux cleaned = 0.163111 Jy ! Total flux subtracted in 200 components = 0.163111 Jy ! Clean residual min=-0.024739 max=0.022866 Jy/beam ! Clean residual mean=-0.000262 rms=0.006252 Jy/beam ! Combined flux in latest and established models = 1.30301 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 1.30301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129896Jy sigma=1.756113 ! Fit after self-cal, rms=0.129885Jy sigma=1.754855 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 8.134 at -6.74 degrees (North through East) ! Clean map min=-0.023063 max=1.1048 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01371 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.05 KP 0.95 ! LA 1.05 MK 0.91 NL 0.93 OV 0.96 ! PT 1.06 SC 0.91 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.990761 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.11 KP 0.99 ! LA 1.02 MK 0.96 NL 0.96 OV 1.02 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.981973 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.06 KP 0.96 ! LA 0.93 MK 1.10 NL 1.04 OV 1.04 ! PT 1.08 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00324 ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.97 HN 0.95 KP 0.89 ! LA 1.00* MK 1.08 NL 0.95 OV 0.87 ! PT 0.99 SC 1.09 ! ! ! Fit before self-cal, rms=0.129885Jy sigma=1.754855 ! Fit after self-cal, rms=0.086763Jy sigma=1.115469 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086763Jy sigma=1.115469 ! Fit after self-cal, rms=0.086757Jy sigma=1.115437 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=8.159 mas, bpa=-6.505 degrees ! Estimated noise=1.88884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00443178 Jy ! Component: 100 - total flux cleaned = -0.00431343 Jy ! Component: 150 - total flux cleaned = -0.00398958 Jy ! Component: 200 - total flux cleaned = -0.00370215 Jy ! Total flux subtracted in 200 components = -0.00370215 Jy ! Clean residual min=-0.007499 max=0.009441 Jy/beam ! Clean residual mean=0.000119 rms=0.002324 Jy/beam ! Combined flux in latest and established models = 1.2993 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 1.2993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086496Jy sigma=1.110001 ! Fit after self-cal, rms=0.086521Jy sigma=1.109589 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086521Jy sigma=1.109589 ! Fit after self-cal, rms=0.083136Jy sigma=1.063962 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.35977e-05 Jy ! Component: 100 - total flux cleaned = 7.89615e-05 Jy ! Component: 150 - total flux cleaned = 0.000248398 Jy ! Component: 200 - total flux cleaned = 0.000394796 Jy ! Total flux subtracted in 200 components = 0.000394796 Jy ! Clean residual min=-0.007211 max=0.009216 Jy/beam ! Clean residual mean=0.000121 rms=0.002265 Jy/beam ! Combined flux in latest and established models = 1.2997 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 1.2997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083002Jy sigma=1.061646 ! Fit after self-cal, rms=0.082905Jy sigma=1.057577 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.983 x 8.159 at -6.505 degrees (North through East) ! Clean map min=-0.0070454 max=1.1034 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082905Jy sigma=1.057577 ! Fit after self-cal, rms=0.077358Jy sigma=0.968300 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077358Jy sigma=0.968300 ! Fit after self-cal, rms=0.077428Jy sigma=0.967873 ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=8.168 mas, bpa=-6.58 degrees ! Estimated noise=1.88975 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000610835 Jy ! Component: 100 - total flux cleaned = 0.0007823 Jy ! Component: 150 - total flux cleaned = 0.000920327 Jy ! Component: 200 - total flux cleaned = 0.000986371 Jy ! Total flux subtracted in 200 components = 0.000986371 Jy ! Clean residual min=-0.007366 max=0.008977 Jy/beam ! Clean residual mean=0.000114 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 1.30068 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 1.30068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077320Jy sigma=0.965940 ! Fit after self-cal, rms=0.077352Jy sigma=0.965753 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077352Jy sigma=0.965753 ! Fit after self-cal, rms=0.076085Jy sigma=0.949376 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076085Jy sigma=0.949376 ! Fit after self-cal, rms=0.076098Jy sigma=0.949370 ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=8.177 mas, bpa=-6.652 degrees ! Estimated noise=1.89196 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936411 Jy ! Component: 100 - total flux cleaned = 0.00107189 Jy ! Component: 150 - total flux cleaned = 0.00112982 Jy ! Component: 200 - total flux cleaned = 0.00123827 Jy ! Total flux subtracted in 200 components = 0.00123827 Jy ! Clean residual min=-0.007230 max=0.008904 Jy/beam ! Clean residual mean=0.000107 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 1.30192 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 1.30192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076015Jy sigma=0.947749 ! Fit after self-cal, rms=0.076004Jy sigma=0.947593 ! Inverting map ! Added new window around map position (-16, 22.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959458 Jy ! Component: 100 - total flux cleaned = 0.0139397 Jy ! Component: 150 - total flux cleaned = 0.0164799 Jy ! Component: 200 - total flux cleaned = 0.0171839 Jy ! Total flux subtracted in 200 components = 0.0171839 Jy ! Clean residual min=-0.006404 max=0.005334 Jy/beam ! Clean residual mean=0.000064 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 1.31911 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 79 components and 1.31911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075300Jy sigma=0.932117 ! Fit after self-cal, rms=0.075268Jy sigma=0.931709 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.748 mas, bmaj=19.3 mas, bpa=-3.654 degrees ! Estimated noise=2.48957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379505 Jy ! Component: 100 - total flux cleaned = 0.00467572 Jy ! Component: 150 - total flux cleaned = 0.00487587 Jy ! Component: 200 - total flux cleaned = 0.00510765 Jy ! Total flux subtracted in 200 components = 0.00510765 Jy ! Clean residual min=-0.005938 max=0.006877 Jy/beam ! Clean residual mean=0.000126 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 1.32421 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 1.32421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075231Jy sigma=0.931971 ! Fit after self-cal, rms=0.075166Jy sigma=0.931432 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=7.132 mas, bpa=-7.456 degrees ! Estimated noise=2.50775 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.941154 Jy ! Component: 100 - total flux cleaned = 1.13511 Jy ! Component: 150 - total flux cleaned = 1.21822 Jy ! Component: 200 - total flux cleaned = 1.25727 Jy ! Total flux subtracted in 200 components = 1.25727 Jy ! Clean residual min=-0.010645 max=0.013289 Jy/beam ! Clean residual mean=-0.000006 rms=0.003160 Jy/beam ! Combined flux in latest and established models = 1.25727 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 1.25727 Jy ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=8.177 mas, bpa=-6.652 degrees ! Estimated noise=1.89196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257646 Jy ! Component: 100 - total flux cleaned = 0.0377713 Jy ! Component: 150 - total flux cleaned = 0.0454436 Jy ! Component: 200 - total flux cleaned = 0.0509013 Jy ! Total flux subtracted in 200 components = 0.0509013 Jy ! Clean residual min=-0.006561 max=0.005731 Jy/beam ! Clean residual mean=0.000058 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 1.30817 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 69 components and 1.30817 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.748 mas, bmaj=19.3 mas, bpa=-3.654 degrees ! Estimated noise=2.48957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066779 Jy ! Component: 100 - total flux cleaned = 0.0103831 Jy ! Component: 150 - total flux cleaned = 0.0125179 Jy ! Component: 200 - total flux cleaned = 0.0131846 Jy ! Total flux subtracted in 200 components = 0.0131846 Jy ! Clean residual min=-0.006327 max=0.006839 Jy/beam ! Clean residual mean=0.000121 rms=0.002360 Jy/beam ! Combined flux in latest and established models = 1.32135 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 1.32135 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=8.177 mas, bpa=-6.652 degrees ! Estimated noise=1.89196 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000815839 Jy ! Component: 100 - total flux cleaned = -0.000610911 Jy ! Component: 150 - total flux cleaned = -0.000536862 Jy ! Component: 200 - total flux cleaned = -0.000391321 Jy ! Total flux subtracted in 200 components = -0.000391321 Jy ! Clean residual min=-0.006147 max=0.005560 Jy/beam ! Clean residual mean=0.000055 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 1.32096 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 1.32096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075268Jy sigma=0.930674 ! Fit after self-cal, rms=0.075227Jy sigma=0.930212 wmodel J1625-2527_S_2005_07_09_yyk\_map.mod ! Writing 110 model components to file: J1625-2527_S_2005_07_09_yyk_map.mod wobs J1625-2527_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J1625-2527_S_2005_07_09_yyk_uvs.fits wwins J1625-2527_S_2005_07_09_yyk\_map.win ! wwins: Wrote 2 windows to J1625-2527_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193942 Jy ! Component: 100 - total flux cleaned = -0.00335255 Jy ! Component: 150 - total flux cleaned = -0.00450213 Jy ! Component: 200 - total flux cleaned = -0.00542392 Jy ! Component: 250 - total flux cleaned = -0.00614095 Jy ! Component: 300 - total flux cleaned = -0.00682386 Jy ! Component: 350 - total flux cleaned = -0.00740662 Jy ! Component: 400 - total flux cleaned = -0.00789835 Jy ! Component: 450 - total flux cleaned = -0.00823883 Jy ! Component: 500 - total flux cleaned = -0.00869821 Jy ! Component: 550 - total flux cleaned = -0.00895306 Jy ! Component: 600 - total flux cleaned = -0.00926185 Jy ! Component: 650 - total flux cleaned = -0.00950336 Jy ! Component: 700 - total flux cleaned = -0.00997066 Jy ! Component: 750 - total flux cleaned = -0.0101963 Jy ! Component: 800 - total flux cleaned = -0.0103074 Jy ! Component: 850 - total flux cleaned = -0.0105225 Jy ! Component: 900 - total flux cleaned = -0.010469 Jy ! Component: 950 - total flux cleaned = -0.0104691 Jy ! Component: 1000 - total flux cleaned = -0.0104693 Jy ! Component: 1050 - total flux cleaned = -0.0105184 Jy ! Component: 1100 - total flux cleaned = -0.0105666 Jy ! Component: 1150 - total flux cleaned = -0.0106612 Jy ! Component: 1200 - total flux cleaned = -0.010616 Jy ! Component: 1250 - total flux cleaned = -0.0105707 Jy ! Component: 1300 - total flux cleaned = -0.0104836 Jy ! Component: 1350 - total flux cleaned = -0.0105701 Jy ! Component: 1400 - total flux cleaned = -0.0104852 Jy ! Component: 1450 - total flux cleaned = -0.0104021 Jy ! Component: 1500 - total flux cleaned = -0.010484 Jy ! Component: 1550 - total flux cleaned = -0.0104036 Jy ! Component: 1600 - total flux cleaned = -0.0104839 Jy ! Component: 1650 - total flux cleaned = -0.0103667 Jy ! Component: 1700 - total flux cleaned = -0.0102892 Jy ! Component: 1750 - total flux cleaned = -0.0102518 Jy ! Component: 1800 - total flux cleaned = -0.0102514 Jy ! Component: 1850 - total flux cleaned = -0.0100664 Jy ! Component: 1900 - total flux cleaned = -0.00995731 Jy ! Component: 1950 - total flux cleaned = -0.00995715 Jy ! Component: 2000 - total flux cleaned = -0.00988597 Jy ! Total flux subtracted in 2048 components = -0.00995612 Jy ! Clean residual min=-0.001941 max=0.002129 Jy/beam ! Clean residual mean=0.000042 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 1.31101 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 259 components and 1.31101 Jy ![Exited script file: muppet] wmap "J1625-2527_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 8.177 at -6.652 degrees (North through East) ! Clean map min=-0.0044564 max=1.1067 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.10666 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000742598 device "J1625-2527_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J1625-2527_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.201308 0.201308 0.402617 0.805234 1.61047 3.22094 6.44187 12.8837 25.7675 51.535 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 8.177 at -6.652 degrees (North through East) ! Clean map min=-0.0044564 max=1.1067 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1625-2527_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J1625-2527_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1625-2527_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:43:16 2006