! Started logfile: J1625-2527_S_2005_07_08_yyk_uvs.log on Fri Jan 20 10:43:08 2006 obs J1625-2527_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1625-2527_S_2005_07_08_yyk_uve.fits ! AN table 1: 3 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.822222 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1411 lines of history. ! ! Reading 444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1625-2527_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.13353 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.509 mas, bmaj=6.851 mas, bpa=-7.72 degrees ! Estimated noise=3.23567 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.92859 Jy ! Component: 100 - total flux cleaned = 1.12556 Jy ! Total flux subtracted in 100 components = 1.12556 Jy ! Clean residual min=-0.029492 max=0.061431 Jy/beam ! Clean residual mean=-0.000760 rms=0.011266 Jy/beam ! Combined flux in latest and established models = 1.12556 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.12556 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.181035Jy sigma=2.546351 ! Fit after self-cal, rms=0.180617Jy sigma=2.544048 ! Inverting map and beam ! Estimated beam: bmin=2.507 mas, bmaj=6.847 mas, bpa=-7.785 degrees ! Estimated noise=3.24333 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=8.129 mas, bpa=-7.424 degrees ! Estimated noise=2.51607 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.110377 Jy ! Component: 100 - total flux cleaned = 0.15238 Jy ! Component: 150 - total flux cleaned = 0.171256 Jy ! Component: 200 - total flux cleaned = 0.177675 Jy ! Total flux subtracted in 200 components = 0.177675 Jy ! Clean residual min=-0.022206 max=0.026021 Jy/beam ! Clean residual mean=-0.000186 rms=0.006432 Jy/beam ! Combined flux in latest and established models = 1.30324 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 51 components and 1.30324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135565Jy sigma=1.767088 ! Fit after self-cal, rms=0.135253Jy sigma=1.765475 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.033 x 8.129 at -7.424 degrees (North through East) ! Clean map min=-0.021002 max=1.0922 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00683 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.16 KP 0.94 ! LA 1.05 MK 0.88 NL 0.92 OV 0.98 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.98523 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.14 KP 1.00 ! LA 1.02 MK 0.99 NL 0.97 OV 1.03 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.974958 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.15 KP 0.98 ! LA 0.94 MK 1.08 NL 1.00 OV 1.02 ! PT 1.10 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01476 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.97 KP 0.89 ! LA 1.00* MK 1.09 NL 0.94 OV 0.86 ! PT 0.99 SC 1.09 ! ! ! Fit before self-cal, rms=0.135253Jy sigma=1.765475 ! Fit after self-cal, rms=0.093565Jy sigma=1.165574 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093565Jy sigma=1.165574 ! Fit after self-cal, rms=0.093575Jy sigma=1.165506 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=8.153 mas, bpa=-7.283 degrees ! Estimated noise=2.49519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0125747 Jy ! Component: 100 - total flux cleaned = -0.0134205 Jy ! Component: 150 - total flux cleaned = -0.0140815 Jy ! Component: 200 - total flux cleaned = -0.0144952 Jy ! Total flux subtracted in 200 components = -0.0144952 Jy ! Clean residual min=-0.009250 max=0.014830 Jy/beam ! Clean residual mean=0.000051 rms=0.002865 Jy/beam ! Combined flux in latest and established models = 1.28874 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 1.28874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092154Jy sigma=1.142991 ! Fit after self-cal, rms=0.092093Jy sigma=1.142687 ! Inverting map ! Added new window around map position (-18, 38). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00926776 Jy ! Component: 100 - total flux cleaned = 0.0090406 Jy ! Component: 150 - total flux cleaned = 0.00903659 Jy ! Component: 200 - total flux cleaned = 0.00917834 Jy ! Total flux subtracted in 200 components = 0.00917834 Jy ! Clean residual min=-0.008023 max=0.007962 Jy/beam ! Clean residual mean=-0.000005 rms=0.002363 Jy/beam ! Combined flux in latest and established models = 1.29792 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 1.29792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089976Jy sigma=1.112079 ! Fit after self-cal, rms=0.089972Jy sigma=1.111955 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089972Jy sigma=1.111955 ! Fit after self-cal, rms=0.084658Jy sigma=1.067129 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.54473e-05 Jy ! Component: 100 - total flux cleaned = 0.000348899 Jy ! Component: 150 - total flux cleaned = 0.000587063 Jy ! Component: 200 - total flux cleaned = 0.000698816 Jy ! Total flux subtracted in 200 components = 0.000698816 Jy ! Clean residual min=-0.007689 max=0.007755 Jy/beam ! Clean residual mean=-0.000000 rms=0.002286 Jy/beam ! Combined flux in latest and established models = 1.29862 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 1.29862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084294Jy sigma=1.063078 ! Fit after self-cal, rms=0.082232Jy sigma=1.054433 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.094 x 8.153 at -7.283 degrees (North through East) ! Clean map min=-0.0076254 max=1.091 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082232Jy sigma=1.054433 ! Fit after self-cal, rms=0.073685Jy sigma=0.912019 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073685Jy sigma=0.912019 ! Fit after self-cal, rms=0.072711Jy sigma=0.908644 ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=8.138 mas, bpa=-7.257 degrees ! Estimated noise=2.491 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109317 Jy ! Component: 100 - total flux cleaned = -0.00132965 Jy ! Component: 150 - total flux cleaned = -0.00143284 Jy ! Component: 200 - total flux cleaned = -0.00114781 Jy ! Total flux subtracted in 200 components = -0.00114781 Jy ! Clean residual min=-0.007867 max=0.007097 Jy/beam ! Clean residual mean=0.000008 rms=0.002054 Jy/beam ! Combined flux in latest and established models = 1.29747 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 1.29747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072425Jy sigma=0.904323 ! Fit after self-cal, rms=0.071904Jy sigma=0.902646 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071904Jy sigma=0.902646 ! Fit after self-cal, rms=0.070271Jy sigma=0.883228 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070271Jy sigma=0.883228 ! Fit after self-cal, rms=0.070005Jy sigma=0.882493 ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.132 mas, bpa=-7.22 degrees ! Estimated noise=2.4871 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152884 Jy ! Component: 100 - total flux cleaned = -0.00162889 Jy ! Component: 150 - total flux cleaned = -0.00145091 Jy ! Component: 200 - total flux cleaned = -0.00119723 Jy ! Total flux subtracted in 200 components = -0.00119723 Jy ! Clean residual min=-0.007423 max=0.006719 Jy/beam ! Clean residual mean=0.000006 rms=0.002003 Jy/beam ! Combined flux in latest and established models = 1.29627 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 125 components and 1.29627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069806Jy sigma=0.879550 ! Fit after self-cal, rms=0.069651Jy sigma=0.879063 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.909 mas, bmaj=19.44 mas, bpa=-4.67 degrees ! Estimated noise=3.23748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103252 Jy ! Component: 100 - total flux cleaned = 0.000915537 Jy ! Component: 150 - total flux cleaned = 0.00101555 Jy ! Component: 200 - total flux cleaned = 0.00110718 Jy ! Total flux subtracted in 200 components = 0.00110718 Jy ! Clean residual min=-0.008039 max=0.009042 Jy/beam ! Clean residual mean=0.000019 rms=0.002577 Jy/beam ! Combined flux in latest and established models = 1.29738 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 133 components and 1.29738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069649Jy sigma=0.878689 ! Fit after self-cal, rms=0.069490Jy sigma=0.878157 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.521 mas, bmaj=6.832 mas, bpa=-7.701 degrees ! Estimated noise=3.21182 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.918869 Jy ! Component: 100 - total flux cleaned = 1.10936 Jy ! Component: 150 - total flux cleaned = 1.19271 Jy ! Component: 200 - total flux cleaned = 1.2334 Jy ! Total flux subtracted in 200 components = 1.2334 Jy ! Clean residual min=-0.011261 max=0.015421 Jy/beam ! Clean residual mean=-0.000161 rms=0.003716 Jy/beam ! Combined flux in latest and established models = 1.2334 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 1.2334 Jy ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.132 mas, bpa=-7.22 degrees ! Estimated noise=2.4871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297808 Jy ! Component: 100 - total flux cleaned = 0.0411988 Jy ! Component: 150 - total flux cleaned = 0.0449911 Jy ! Component: 200 - total flux cleaned = 0.047734 Jy ! Total flux subtracted in 200 components = 0.047734 Jy ! Clean residual min=-0.007679 max=0.007757 Jy/beam ! Clean residual mean=-0.000045 rms=0.002250 Jy/beam ! Combined flux in latest and established models = 1.28113 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 71 components and 1.28113 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.909 mas, bmaj=19.44 mas, bpa=-4.67 degrees ! Estimated noise=3.23748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00742474 Jy ! Component: 100 - total flux cleaned = 0.00863443 Jy ! Component: 150 - total flux cleaned = 0.00939963 Jy ! Component: 200 - total flux cleaned = 0.0102312 Jy ! Total flux subtracted in 200 components = 0.0102312 Jy ! Clean residual min=-0.008188 max=0.009167 Jy/beam ! Clean residual mean=-0.000018 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 1.29136 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 1.29136 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.132 mas, bpa=-7.22 degrees ! Estimated noise=2.4871 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000657226 Jy ! Component: 100 - total flux cleaned = -0.000175346 Jy ! Component: 150 - total flux cleaned = 9.81618e-05 Jy ! Component: 200 - total flux cleaned = 0.000221892 Jy ! Total flux subtracted in 200 components = 0.000221892 Jy ! Clean residual min=-0.007211 max=0.007206 Jy/beam ! Clean residual mean=-0.000006 rms=0.002033 Jy/beam ! Combined flux in latest and established models = 1.29159 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 1.29159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069948Jy sigma=0.881843 ! Fit after self-cal, rms=0.069823Jy sigma=0.881467 wmodel J1625-2527_S_2005_07_08_yyk\_map.mod ! Writing 109 model components to file: J1625-2527_S_2005_07_08_yyk_map.mod wobs J1625-2527_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1625-2527_S_2005_07_08_yyk_uvs.fits wwins J1625-2527_S_2005_07_08_yyk\_map.win ! wwins: Wrote 2 windows to J1625-2527_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038167 Jy ! Component: 100 - total flux cleaned = 0.00120431 Jy ! Component: 150 - total flux cleaned = 0.00252269 Jy ! Component: 200 - total flux cleaned = 0.00262972 Jy ! Component: 250 - total flux cleaned = 0.00302741 Jy ! Component: 300 - total flux cleaned = 0.0033088 Jy ! Component: 350 - total flux cleaned = 0.00366574 Jy ! Component: 400 - total flux cleaned = 0.00400802 Jy ! Component: 450 - total flux cleaned = 0.00425744 Jy ! Component: 500 - total flux cleaned = 0.00457572 Jy ! Component: 550 - total flux cleaned = 0.0046497 Jy ! Component: 600 - total flux cleaned = 0.00487339 Jy ! Component: 650 - total flux cleaned = 0.00480098 Jy ! Component: 700 - total flux cleaned = 0.0049437 Jy ! Component: 750 - total flux cleaned = 0.00494386 Jy ! Component: 800 - total flux cleaned = 0.00481093 Jy ! Component: 850 - total flux cleaned = 0.00474672 Jy ! Component: 900 - total flux cleaned = 0.0045568 Jy ! Component: 950 - total flux cleaned = 0.00474441 Jy ! Component: 1000 - total flux cleaned = 0.00499006 Jy ! Component: 1050 - total flux cleaned = 0.0055263 Jy ! Component: 1100 - total flux cleaned = 0.00605011 Jy ! Component: 1150 - total flux cleaned = 0.00622301 Jy ! Component: 1200 - total flux cleaned = 0.00672735 Jy ! Component: 1250 - total flux cleaned = 0.00721946 Jy ! Component: 1300 - total flux cleaned = 0.00738005 Jy ! Component: 1350 - total flux cleaned = 0.00780192 Jy ! Component: 1400 - total flux cleaned = 0.00805927 Jy ! Component: 1450 - total flux cleaned = 0.00810959 Jy ! Component: 1500 - total flux cleaned = 0.00840886 Jy ! Component: 1550 - total flux cleaned = 0.00865357 Jy ! Component: 1600 - total flux cleaned = 0.0088936 Jy ! Component: 1650 - total flux cleaned = 0.00898909 Jy ! Component: 1700 - total flux cleaned = 0.00917546 Jy ! Component: 1750 - total flux cleaned = 0.00922025 Jy ! Component: 1800 - total flux cleaned = 0.00917419 Jy ! Component: 1850 - total flux cleaned = 0.00921831 Jy ! Component: 1900 - total flux cleaned = 0.00921801 Jy ! Component: 1950 - total flux cleaned = 0.00917442 Jy ! Component: 2000 - total flux cleaned = 0.0091747 Jy ! Total flux subtracted in 2048 components = 0.0091742 Jy ! Clean residual min=-0.002318 max=0.002748 Jy/beam ! Clean residual mean=-0.000007 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 1.30076 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 240 components and 1.30076 Jy ![Exited script file: muppet] wmap "J1625-2527_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 8.132 at -7.22 degrees (North through East) ! Clean map min=-0.010881 max=1.0918 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.09179 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000870315 device "J1625-2527_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1625-2527_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.239144 0.239144 0.478287 0.956575 1.91315 3.8263 7.6526 15.3052 30.6104 61.2208 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 8.132 at -7.22 degrees (North through East) ! Clean map min=-0.010881 max=1.0918 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1625-2527_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1625-2527_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1625-2527_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:43:12 2006