! Started logfile: J1609-2205_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:42:03 2006 obs J1609-2205_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J1609-2205_S_2005_07_09_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.931313 visibilities/baseline/integration-bin. ! Found source: J1609-2205 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1609-2205_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.159785 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.503 mas, bmaj=6.948 mas, bpa=-3.148 degrees ! Estimated noise=1.88199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101464 Jy ! Component: 100 - total flux cleaned = 0.13214 Jy ! Total flux subtracted in 100 components = 0.13214 Jy ! Clean residual min=-0.009410 max=0.011342 Jy/beam ! Clean residual mean=-0.000003 rms=0.002673 Jy/beam ! Combined flux in latest and established models = 0.13214 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.13214 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.086573Jy sigma=1.266770 ! Fit after self-cal, rms=0.083999Jy sigma=1.214678 ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=6.942 mas, bpa=-3.126 degrees ! Estimated noise=1.88919 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=10.29 mas, bpa=-8.619 degrees ! Estimated noise=1.08287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261988 Jy ! Component: 100 - total flux cleaned = 0.0347898 Jy ! Component: 150 - total flux cleaned = 0.0381935 Jy ! Component: 200 - total flux cleaned = 0.0392567 Jy ! Total flux subtracted in 200 components = 0.0392567 Jy ! Clean residual min=-0.005107 max=0.005454 Jy/beam ! Clean residual mean=-0.000179 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.171396 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 62 components and 0.171396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079084Jy sigma=1.110291 ! Fit after self-cal, rms=0.079032Jy sigma=1.109653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.355 x 10.29 at -8.619 degrees (North through East) ! Clean map min=-0.0048301 max=0.13168 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00074 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.15 KP 0.95 ! LA 1.09 MK 0.94 NL 0.97 OV 0.99 ! PT 1.02 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.969093 ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.90 HN 1.05 KP 1.02 ! LA 0.96 MK 1.04 NL 1.07 OV 1.06 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.079032Jy sigma=1.109653 ! Fit after self-cal, rms=0.078816Jy sigma=1.102285 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078816Jy sigma=1.102285 ! Fit after self-cal, rms=0.078756Jy sigma=1.101864 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=10.12 mas, bpa=-8.3 degrees ! Estimated noise=1.07778 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194475 Jy ! Component: 100 - total flux cleaned = 0.000317893 Jy ! Component: 150 - total flux cleaned = 0.00041751 Jy ! Component: 200 - total flux cleaned = 0.000534615 Jy ! Total flux subtracted in 200 components = 0.000534615 Jy ! Clean residual min=-0.005273 max=0.005603 Jy/beam ! Clean residual mean=-0.000100 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.171931 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 66 components and 0.171931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078702Jy sigma=1.101318 ! Fit after self-cal, rms=0.078666Jy sigma=1.100914 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078666Jy sigma=1.100914 ! Fit after self-cal, rms=0.071153Jy sigma=0.995648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244128 Jy ! Component: 100 - total flux cleaned = 0.00249903 Jy ! Component: 150 - total flux cleaned = 0.00250175 Jy ! Component: 200 - total flux cleaned = 0.00250237 Jy ! Total flux subtracted in 200 components = 0.00250237 Jy ! Clean residual min=-0.004520 max=0.004478 Jy/beam ! Clean residual mean=-0.000102 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.174433 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.174433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071061Jy sigma=0.993927 ! Fit after self-cal, rms=0.070541Jy sigma=0.987191 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.331 x 10.12 at -8.3 degrees (North through East) ! Clean map min=-0.0043862 max=0.133 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070541Jy sigma=0.987191 ! Fit after self-cal, rms=0.070218Jy sigma=0.982487 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070218Jy sigma=0.982487 ! Fit after self-cal, rms=0.070116Jy sigma=0.981586 ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=10.07 mas, bpa=-7.888 degrees ! Estimated noise=1.0829 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014473 Jy ! Component: 100 - total flux cleaned = 0.00152982 Jy ! Component: 150 - total flux cleaned = 0.00153167 Jy ! Component: 200 - total flux cleaned = 0.00155294 Jy ! Total flux subtracted in 200 components = 0.00155294 Jy ! Clean residual min=-0.004520 max=0.004226 Jy/beam ! Clean residual mean=-0.000106 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.175986 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 82 components and 0.175986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070069Jy sigma=0.981037 ! Fit after self-cal, rms=0.070034Jy sigma=0.980765 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070034Jy sigma=0.980765 ! Fit after self-cal, rms=0.070461Jy sigma=0.980022 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070461Jy sigma=0.980022 ! Fit after self-cal, rms=0.070450Jy sigma=0.979884 ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=10.22 mas, bpa=-8.339 degrees ! Estimated noise=1.09252 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145644 Jy ! Component: 100 - total flux cleaned = 0.00172156 Jy ! Component: 150 - total flux cleaned = 0.00178194 Jy ! Component: 200 - total flux cleaned = 0.0018011 Jy ! Total flux subtracted in 200 components = 0.0018011 Jy ! Clean residual min=-0.004717 max=0.004340 Jy/beam ! Clean residual mean=-0.000096 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.177787 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 86 components and 0.177787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070387Jy sigma=0.979437 ! Fit after self-cal, rms=0.070390Jy sigma=0.979360 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.482 mas, bmaj=20.99 mas, bpa=4.201 degrees ! Estimated noise=1.34124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -8.03422e-05 Jy ! Component: 100 - total flux cleaned = -7.85284e-05 Jy ! Component: 150 - total flux cleaned = -2.07566e-05 Jy ! Component: 200 - total flux cleaned = -1.77851e-05 Jy ! Total flux subtracted in 200 components = -1.77851e-05 Jy ! Clean residual min=-0.003351 max=0.003642 Jy/beam ! Clean residual mean=-0.000177 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.17777 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 90 components and 0.17777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070393Jy sigma=0.979909 ! Fit after self-cal, rms=0.070386Jy sigma=0.979602 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.497 mas, bmaj=6.91 mas, bpa=-2.95 degrees ! Estimated noise=1.89531 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.109249 Jy ! Component: 100 - total flux cleaned = 0.142787 Jy ! Component: 150 - total flux cleaned = 0.158423 Jy ! Component: 200 - total flux cleaned = 0.167446 Jy ! Total flux subtracted in 200 components = 0.167446 Jy ! Clean residual min=-0.007981 max=0.007326 Jy/beam ! Clean residual mean=0.000005 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 0.167446 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.167446 Jy ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=10.22 mas, bpa=-8.339 degrees ! Estimated noise=1.09252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00699482 Jy ! Component: 100 - total flux cleaned = 0.0091379 Jy ! Component: 150 - total flux cleaned = 0.00970025 Jy ! Component: 200 - total flux cleaned = 0.00978005 Jy ! Total flux subtracted in 200 components = 0.00978005 Jy ! Clean residual min=-0.004929 max=0.004201 Jy/beam ! Clean residual mean=-0.000091 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.177226 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.177226 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.482 mas, bmaj=20.99 mas, bpa=4.201 degrees ! Estimated noise=1.34124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295467 Jy ! Component: 100 - total flux cleaned = 0.000303424 Jy ! Component: 150 - total flux cleaned = 0.000306974 Jy ! Component: 200 - total flux cleaned = 0.000328481 Jy ! Total flux subtracted in 200 components = 0.000328481 Jy ! Clean residual min=-0.003354 max=0.003607 Jy/beam ! Clean residual mean=-0.000173 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.177555 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.177555 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=10.22 mas, bpa=-8.339 degrees ! Estimated noise=1.09252 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.39559e-05 Jy ! Component: 100 - total flux cleaned = -5.66025e-05 Jy ! Component: 150 - total flux cleaned = -5.98399e-05 Jy ! Component: 200 - total flux cleaned = -3.52994e-05 Jy ! Total flux subtracted in 200 components = -3.52994e-05 Jy ! Clean residual min=-0.004862 max=0.004214 Jy/beam ! Clean residual mean=-0.000093 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.17752 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.17752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070409Jy sigma=0.979537 ! Fit after self-cal, rms=0.070412Jy sigma=0.979443 wmodel J1609-2205_S_2005_07_09_yyk\_map.mod ! Writing 70 model components to file: J1609-2205_S_2005_07_09_yyk_map.mod wobs J1609-2205_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J1609-2205_S_2005_07_09_yyk_uvs.fits wwins J1609-2205_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J1609-2205_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000738364 Jy ! Component: 100 - total flux cleaned = -0.000733292 Jy ! Component: 150 - total flux cleaned = -0.000667286 Jy ! Component: 200 - total flux cleaned = -0.000483189 Jy ! Component: 250 - total flux cleaned = -0.000248746 Jy ! Component: 300 - total flux cleaned = 3.48049e-05 Jy ! Component: 350 - total flux cleaned = 0.000200089 Jy ! Component: 400 - total flux cleaned = 0.000253728 Jy ! Component: 450 - total flux cleaned = 0.000254189 Jy ! Component: 500 - total flux cleaned = 0.000253736 Jy ! Component: 550 - total flux cleaned = 0.000253898 Jy ! Component: 600 - total flux cleaned = 0.000489341 Jy ! Component: 650 - total flux cleaned = 0.000763775 Jy ! Component: 700 - total flux cleaned = 0.000943306 Jy ! Component: 750 - total flux cleaned = 0.00125028 Jy ! Component: 800 - total flux cleaned = 0.00137931 Jy ! Component: 850 - total flux cleaned = 0.00163258 Jy ! Component: 900 - total flux cleaned = 0.00179889 Jy ! Component: 950 - total flux cleaned = 0.00208367 Jy ! Component: 1000 - total flux cleaned = 0.00240231 Jy ! Component: 1050 - total flux cleaned = 0.00259796 Jy ! Component: 1100 - total flux cleaned = 0.00282785 Jy ! Component: 1150 - total flux cleaned = 0.00282802 Jy ! Component: 1200 - total flux cleaned = 0.0028652 Jy ! Component: 1250 - total flux cleaned = 0.00286515 Jy ! Component: 1300 - total flux cleaned = 0.00279271 Jy ! Component: 1350 - total flux cleaned = 0.00275705 Jy ! Component: 1400 - total flux cleaned = 0.00268683 Jy ! Component: 1450 - total flux cleaned = 0.00265241 Jy ! Component: 1500 - total flux cleaned = 0.00258367 Jy ! Component: 1550 - total flux cleaned = 0.00251599 Jy ! Component: 1600 - total flux cleaned = 0.00241603 Jy ! Component: 1650 - total flux cleaned = 0.00228509 Jy ! Component: 1700 - total flux cleaned = 0.0023503 Jy ! Component: 1750 - total flux cleaned = 0.00238271 Jy ! Component: 1800 - total flux cleaned = 0.00241424 Jy ! Component: 1850 - total flux cleaned = 0.00241411 Jy ! Component: 1900 - total flux cleaned = 0.00241369 Jy ! Component: 1950 - total flux cleaned = 0.00244451 Jy ! Component: 2000 - total flux cleaned = 0.00256451 Jy ! Total flux subtracted in 2048 components = 0.00253461 Jy ! Clean residual min=-0.001698 max=0.001578 Jy/beam ! Clean residual mean=-0.000039 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.180054 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 210 components and 0.180054 Jy ![Exited script file: muppet] wmap "J1609-2205_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.335 x 10.22 at -8.339 degrees (North through East) ! Clean map min=-0.0030798 max=0.13334 Jy/beam ! Writing clean map to FITS file: J1609-2205_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133336 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000595406 device "J1609-2205_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J1609-2205_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.33963 1.33963 2.67927 5.35854 10.7171 21.4342 42.8683 85.7366 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.133 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.335 x 10.22 at -8.339 degrees (North through East) ! Clean map min=-0.0030798 max=0.13334 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1609-2205_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J1609-2205_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1609-2205_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:42:07 2006