! Started logfile: J1534-2218_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:38:42 2006 obs J1534-2218_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J1534-2218_S_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1534-2218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1534-2218_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.183558 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=6.446 mas, bpa=-0.8497 degrees ! Estimated noise=1.55595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.134293 Jy ! Component: 100 - total flux cleaned = 0.165366 Jy ! Total flux subtracted in 100 components = 0.165366 Jy ! Clean residual min=-0.007672 max=0.010907 Jy/beam ! Clean residual mean=0.000015 rms=0.002325 Jy/beam ! Combined flux in latest and established models = 0.165366 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.165366 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.076884Jy sigma=1.121159 ! Fit after self-cal, rms=0.076797Jy sigma=1.116954 ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=6.446 mas, bpa=-0.8497 degrees ! Estimated noise=1.55595 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.928 mas, bpa=-1.303 degrees ! Estimated noise=1.08726 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171484 Jy ! Component: 100 - total flux cleaned = 0.0238265 Jy ! Component: 150 - total flux cleaned = 0.0267598 Jy ! Component: 200 - total flux cleaned = 0.0276186 Jy ! Total flux subtracted in 200 components = 0.0276186 Jy ! Clean residual min=-0.005138 max=0.005907 Jy/beam ! Clean residual mean=-0.000051 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.192984 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 0.192984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073515Jy sigma=1.069946 ! Fit after self-cal, rms=0.073530Jy sigma=1.069828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 7.928 at -1.303 degrees (North through East) ! Clean map min=-0.004963 max=0.15649 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04171 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.97 KP 0.96 ! LA 1.02 MK 0.88 NL 0.95 OV 0.88 ! PT 1.08 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.073530Jy sigma=1.069828 ! Fit after self-cal, rms=0.072927Jy sigma=1.065294 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072927Jy sigma=1.065294 ! Fit after self-cal, rms=0.072928Jy sigma=1.065286 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=7.826 mas, bpa=-1.323 degrees ! Estimated noise=1.08888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247766 Jy ! Component: 100 - total flux cleaned = 0.00286302 Jy ! Component: 150 - total flux cleaned = 0.00325147 Jy ! Component: 200 - total flux cleaned = 0.00358496 Jy ! Total flux subtracted in 200 components = 0.00358496 Jy ! Clean residual min=-0.005062 max=0.006366 Jy/beam ! Clean residual mean=-0.000007 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.196569 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.196569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072766Jy sigma=1.063548 ! Fit after self-cal, rms=0.072774Jy sigma=1.063504 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072774Jy sigma=1.063504 ! Fit after self-cal, rms=0.068574Jy sigma=1.010555 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013112 Jy ! Component: 100 - total flux cleaned = 0.00154825 Jy ! Component: 150 - total flux cleaned = 0.0016722 Jy ! Component: 200 - total flux cleaned = 0.00178789 Jy ! Total flux subtracted in 200 components = 0.00178789 Jy ! Clean residual min=-0.005140 max=0.006268 Jy/beam ! Clean residual mean=-0.000017 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.198357 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.198357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068484Jy sigma=1.009672 ! Fit after self-cal, rms=0.068123Jy sigma=1.006839 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.095 x 7.826 at -1.323 degrees (North through East) ! Clean map min=-0.0049233 max=0.15566 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068123Jy sigma=1.006839 ! Fit after self-cal, rms=0.066321Jy sigma=0.992779 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066321Jy sigma=0.992779 ! Fit after self-cal, rms=0.066282Jy sigma=0.992471 ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=7.726 mas, bpa=-1.648 degrees ! Estimated noise=1.06674 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169445 Jy ! Component: 100 - total flux cleaned = -0.00164881 Jy ! Component: 150 - total flux cleaned = -0.00155772 Jy ! Component: 200 - total flux cleaned = -0.00143514 Jy ! Total flux subtracted in 200 components = -0.00143514 Jy ! Clean residual min=-0.004847 max=0.005085 Jy/beam ! Clean residual mean=-0.000027 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.196922 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.196922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066351Jy sigma=0.990829 ! Fit after self-cal, rms=0.066348Jy sigma=0.990757 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066348Jy sigma=0.990757 ! Fit after self-cal, rms=0.064667Jy sigma=0.985636 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064667Jy sigma=0.985636 ! Fit after self-cal, rms=0.064661Jy sigma=0.985585 ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.619 mas, bpa=-1.066 degrees ! Estimated noise=1.04138 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0025655 Jy ! Component: 100 - total flux cleaned = -0.00239173 Jy ! Component: 150 - total flux cleaned = -0.0022556 Jy ! Component: 200 - total flux cleaned = -0.00217791 Jy ! Total flux subtracted in 200 components = -0.00217791 Jy ! Clean residual min=-0.004914 max=0.005165 Jy/beam ! Clean residual mean=-0.000030 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.194744 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.194744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064735Jy sigma=0.982641 ! Fit after self-cal, rms=0.064733Jy sigma=0.982615 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.183 mas, bmaj=17.62 mas, bpa=8.881 degrees ! Estimated noise=1.35542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125953 Jy ! Component: 100 - total flux cleaned = 0.00152384 Jy ! Component: 150 - total flux cleaned = 0.00167671 Jy ! Component: 200 - total flux cleaned = 0.0018743 Jy ! Total flux subtracted in 200 components = 0.0018743 Jy ! Clean residual min=-0.005243 max=0.005550 Jy/beam ! Clean residual mean=-0.000073 rms=0.002068 Jy/beam ! Combined flux in latest and established models = 0.196618 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 67 components and 0.196618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064801Jy sigma=0.984113 ! Fit after self-cal, rms=0.064795Jy sigma=0.984050 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=6.368 mas, bpa=-0.9121 degrees ! Estimated noise=1.46065 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.127989 Jy ! Component: 100 - total flux cleaned = 0.159125 Jy ! Component: 150 - total flux cleaned = 0.174339 Jy ! Component: 200 - total flux cleaned = 0.182789 Jy ! Total flux subtracted in 200 components = 0.182789 Jy ! Clean residual min=-0.006487 max=0.006770 Jy/beam ! Clean residual mean=0.000008 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.182789 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.182789 Jy ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.619 mas, bpa=-1.066 degrees ! Estimated noise=1.04138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, -10). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00855699 Jy ! Component: 100 - total flux cleaned = 0.0122553 Jy ! Component: 150 - total flux cleaned = 0.013609 Jy ! Component: 200 - total flux cleaned = 0.0144353 Jy ! Total flux subtracted in 200 components = 0.0144353 Jy ! Clean residual min=-0.004692 max=0.005235 Jy/beam ! Clean residual mean=-0.000035 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.197224 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 74 components and 0.197224 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.183 mas, bmaj=17.62 mas, bpa=8.881 degrees ! Estimated noise=1.35542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020304 Jy ! Component: 100 - total flux cleaned = 0.00228532 Jy ! Component: 150 - total flux cleaned = 0.00243304 Jy ! Component: 200 - total flux cleaned = 0.00243481 Jy ! Total flux subtracted in 200 components = 0.00243481 Jy ! Clean residual min=-0.005309 max=0.004795 Jy/beam ! Clean residual mean=-0.000085 rms=0.001934 Jy/beam ! Combined flux in latest and established models = 0.199659 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.199659 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.619 mas, bpa=-1.066 degrees ! Estimated noise=1.04138 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132947 Jy ! Component: 100 - total flux cleaned = -0.00121011 Jy ! Component: 150 - total flux cleaned = -0.00111818 Jy ! Component: 200 - total flux cleaned = -0.00111925 Jy ! Total flux subtracted in 200 components = -0.00111925 Jy ! Clean residual min=-0.004722 max=0.005156 Jy/beam ! Clean residual mean=-0.000036 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.19854 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.19854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064612Jy sigma=0.974100 ! Fit after self-cal, rms=0.064561Jy sigma=0.973530 wmodel J1534-2218_S_2005_07_09_yyk\_map.mod ! Writing 105 model components to file: J1534-2218_S_2005_07_09_yyk_map.mod wobs J1534-2218_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J1534-2218_S_2005_07_09_yyk_uvs.fits wwins J1534-2218_S_2005_07_09_yyk\_map.win ! wwins: Wrote 2 windows to J1534-2218_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.18375e-06 Jy ! Component: 100 - total flux cleaned = -0.000387897 Jy ! Component: 150 - total flux cleaned = -0.000954355 Jy ! Component: 200 - total flux cleaned = -0.00129332 Jy ! Component: 250 - total flux cleaned = -0.00167719 Jy ! Component: 300 - total flux cleaned = -0.00198493 Jy ! Component: 350 - total flux cleaned = -0.00245799 Jy ! Component: 400 - total flux cleaned = -0.00245708 Jy ! Component: 450 - total flux cleaned = -0.00256831 Jy ! Component: 500 - total flux cleaned = -0.00272801 Jy ! Component: 550 - total flux cleaned = -0.00267517 Jy ! Component: 600 - total flux cleaned = -0.00277633 Jy ! Component: 650 - total flux cleaned = -0.00292362 Jy ! Component: 700 - total flux cleaned = -0.00301978 Jy ! Component: 750 - total flux cleaned = -0.00306856 Jy ! Component: 800 - total flux cleaned = -0.00325205 Jy ! Component: 850 - total flux cleaned = -0.00334146 Jy ! Component: 900 - total flux cleaned = -0.00347201 Jy ! Component: 950 - total flux cleaned = -0.00351355 Jy ! Component: 1000 - total flux cleaned = -0.0034307 Jy ! Component: 1050 - total flux cleaned = -0.00343133 Jy ! Component: 1100 - total flux cleaned = -0.00343075 Jy ! Component: 1150 - total flux cleaned = -0.00327272 Jy ! Component: 1200 - total flux cleaned = -0.0031173 Jy ! Component: 1250 - total flux cleaned = -0.00296469 Jy ! Component: 1300 - total flux cleaned = -0.0027387 Jy ! Component: 1350 - total flux cleaned = -0.00259075 Jy ! Component: 1400 - total flux cleaned = -0.00237177 Jy ! Component: 1450 - total flux cleaned = -0.00219184 Jy ! Component: 1500 - total flux cleaned = -0.00197876 Jy ! Component: 1550 - total flux cleaned = -0.00173411 Jy ! Component: 1600 - total flux cleaned = -0.00163022 Jy ! Component: 1650 - total flux cleaned = -0.00125636 Jy ! Component: 1700 - total flux cleaned = -0.000954823 Jy ! Component: 1750 - total flux cleaned = -0.000723096 Jy ! Component: 1800 - total flux cleaned = -0.00052759 Jy ! Component: 1850 - total flux cleaned = -0.0004306 Jy ! Component: 1900 - total flux cleaned = -0.00017507 Jy ! Component: 1950 - total flux cleaned = 1.41198e-05 Jy ! Component: 2000 - total flux cleaned = 0.000294466 Jy ! Total flux subtracted in 2048 components = 0.000479124 Jy ! Clean residual min=-0.002022 max=0.001661 Jy/beam ! Clean residual mean=-0.000013 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.199019 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 246 components and 0.199019 Jy ![Exited script file: muppet] wmap "J1534-2218_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.028 x 7.619 at -1.066 degrees (North through East) ! Clean map min=-0.0032897 max=0.14934 Jy/beam ! Writing clean map to FITS file: J1534-2218_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.149337 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000641864 device "J1534-2218_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J1534-2218_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28943 1.28943 2.57886 5.15772 10.3154 20.6309 41.2618 82.5235 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.149 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.028 x 7.619 at -1.066 degrees (North through East) ! Clean map min=-0.0032897 max=0.14934 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1534-2218_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J1534-2218_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1534-2218_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:38:46 2006