! Started logfile: J1526-0425_X_2005_07_09_yyk_uvs.log on Fri Jan 20 10:38:20 2006 obs J1526-0425_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J1526-0425_X_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98 visibilities/baseline/integration-bin. ! Found source: J1526-0425 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1480 lines of history. ! ! Reading 1764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1526-0425_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.126995 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7755 mas, bmaj=1.914 mas, bpa=4.549 degrees ! Estimated noise=1.36174 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0828757 Jy ! Component: 100 - total flux cleaned = 0.105894 Jy ! Total flux subtracted in 100 components = 0.105894 Jy ! Clean residual min=-0.007595 max=0.008069 Jy/beam ! Clean residual mean=-0.000007 rms=0.001903 Jy/beam ! Combined flux in latest and established models = 0.105894 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.105894 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.078937Jy sigma=1.126646 ! Fit after self-cal, rms=0.078368Jy sigma=1.116354 ! Inverting map and beam ! Estimated beam: bmin=0.7755 mas, bmaj=1.914 mas, bpa=4.549 degrees ! Estimated noise=1.36174 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.041 mas, bmaj=2.522 mas, bpa=10.34 degrees ! Estimated noise=0.959338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013055 Jy ! Component: 100 - total flux cleaned = 0.017185 Jy ! Component: 150 - total flux cleaned = 0.0184311 Jy ! Component: 200 - total flux cleaned = 0.0184711 Jy ! Total flux subtracted in 200 components = 0.0184711 Jy ! Clean residual min=-0.004972 max=0.005938 Jy/beam ! Clean residual mean=0.000000 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.124365 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 0.124365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077467Jy sigma=1.082959 ! Fit after self-cal, rms=0.077443Jy sigma=1.082848 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.041 x 2.522 at 10.34 degrees (North through East) ! Clean map min=-0.0046724 max=0.10026 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01409 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.00 KP 0.99 ! LA 1.02 MK 1.00* NL 1.06 OV 0.99 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.077443Jy sigma=1.082848 ! Fit after self-cal, rms=0.077356Jy sigma=1.081379 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077356Jy sigma=1.081379 ! Fit after self-cal, rms=0.077358Jy sigma=1.081376 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.032 mas, bmaj=2.515 mas, bpa=10.86 degrees ! Estimated noise=0.957556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00056137 Jy ! Component: 100 - total flux cleaned = 0.000559682 Jy ! Component: 150 - total flux cleaned = 0.00062308 Jy ! Component: 200 - total flux cleaned = 0.000682857 Jy ! Total flux subtracted in 200 components = 0.000682857 Jy ! Clean residual min=-0.004974 max=0.005505 Jy/beam ! Clean residual mean=-0.000000 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.125048 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.125048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077301Jy sigma=1.080774 ! Fit after self-cal, rms=0.077296Jy sigma=1.080738 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077296Jy sigma=1.080738 ! Fit after self-cal, rms=0.073622Jy sigma=1.011163 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 0.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427868 Jy ! Component: 100 - total flux cleaned = 0.00497454 Jy ! Component: 150 - total flux cleaned = 0.00529549 Jy ! Component: 200 - total flux cleaned = 0.00536939 Jy ! Total flux subtracted in 200 components = 0.00536939 Jy ! Clean residual min=-0.004190 max=0.004436 Jy/beam ! Clean residual mean=0.000000 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.130417 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.130417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073367Jy sigma=1.003071 ! Fit after self-cal, rms=0.072917Jy sigma=0.994925 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.032 x 2.515 at 10.86 degrees (North through East) ! Clean map min=-0.0038381 max=0.10165 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072917Jy sigma=0.994925 ! Fit after self-cal, rms=0.071173Jy sigma=0.985442 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071173Jy sigma=0.985442 ! Fit after self-cal, rms=0.071055Jy sigma=0.984157 ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.507 mas, bpa=11.47 degrees ! Estimated noise=0.938806 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126659 Jy ! Component: 100 - total flux cleaned = 0.001337 Jy ! Component: 150 - total flux cleaned = 0.00122013 Jy ! Component: 200 - total flux cleaned = 0.00112294 Jy ! Total flux subtracted in 200 components = 0.00112294 Jy ! Clean residual min=-0.003740 max=0.003806 Jy/beam ! Clean residual mean=-0.000001 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.13154 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 81 components and 0.13154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070942Jy sigma=0.981887 ! Fit after self-cal, rms=0.070880Jy sigma=0.981375 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070880Jy sigma=0.981375 ! Fit after self-cal, rms=0.070126Jy sigma=0.978406 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070126Jy sigma=0.978406 ! Fit after self-cal, rms=0.070067Jy sigma=0.978172 ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=2.514 mas, bpa=12.76 degrees ! Estimated noise=0.919518 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138867 Jy ! Component: 100 - total flux cleaned = -0.00101546 Jy ! Component: 150 - total flux cleaned = -0.000756651 Jy ! Component: 200 - total flux cleaned = -0.000670861 Jy ! Total flux subtracted in 200 components = -0.000670861 Jy ! Clean residual min=-0.003811 max=0.003655 Jy/beam ! Clean residual mean=-0.000002 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.130869 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 92 components and 0.130869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069873Jy sigma=0.975689 ! Fit after self-cal, rms=0.069841Jy sigma=0.975555 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.21 mas, bmaj=3.836 mas, bpa=6.371 degrees ! Estimated noise=1.12227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003092 Jy ! Component: 100 - total flux cleaned = -0.000363529 Jy ! Component: 150 - total flux cleaned = -0.000382166 Jy ! Component: 200 - total flux cleaned = -0.000380603 Jy ! Total flux subtracted in 200 components = -0.000380603 Jy ! Clean residual min=-0.002887 max=0.003545 Jy/beam ! Clean residual mean=-0.000004 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.130489 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.130489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069842Jy sigma=0.975317 ! Fit after self-cal, rms=0.069823Jy sigma=0.975204 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7722 mas, bmaj=1.915 mas, bpa=5.923 degrees ! Estimated noise=1.3049 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0816011 Jy ! Component: 100 - total flux cleaned = 0.103511 Jy ! Component: 150 - total flux cleaned = 0.114074 Jy ! Component: 200 - total flux cleaned = 0.120779 Jy ! Total flux subtracted in 200 components = 0.120779 Jy ! Clean residual min=-0.006472 max=0.006323 Jy/beam ! Clean residual mean=-0.000003 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.120779 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.120779 Jy ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=2.514 mas, bpa=12.76 degrees ! Estimated noise=0.919518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.8, 10.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544538 Jy ! Component: 100 - total flux cleaned = 0.00592841 Jy ! Component: 150 - total flux cleaned = 0.00645907 Jy ! Component: 200 - total flux cleaned = 0.0067957 Jy ! Total flux subtracted in 200 components = 0.0067957 Jy ! Clean residual min=-0.003708 max=0.003801 Jy/beam ! Clean residual mean=-0.000003 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.127575 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 56 components and 0.127575 Jy ! Inverting map ! Added new window around map position (-11.4, -0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360753 Jy ! Component: 100 - total flux cleaned = 0.00464039 Jy ! Component: 150 - total flux cleaned = 0.00500129 Jy ! Component: 200 - total flux cleaned = 0.00525135 Jy ! Total flux subtracted in 200 components = 0.00525135 Jy ! Clean residual min=-0.003235 max=0.002927 Jy/beam ! Clean residual mean=-0.000004 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.132826 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 82 components and 0.132826 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.21 mas, bmaj=3.836 mas, bpa=6.371 degrees ! Estimated noise=1.12227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143199 Jy ! Component: 100 - total flux cleaned = 0.0018331 Jy ! Component: 150 - total flux cleaned = 0.0018868 Jy ! Component: 200 - total flux cleaned = 0.00184107 Jy ! Total flux subtracted in 200 components = 0.00184107 Jy ! Clean residual min=-0.002546 max=0.002499 Jy/beam ! Clean residual mean=-0.000006 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.134667 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 108 components and 0.134667 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=2.514 mas, bpa=12.76 degrees ! Estimated noise=0.919518 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000990932 Jy ! Component: 100 - total flux cleaned = -0.00119842 Jy ! Component: 150 - total flux cleaned = -0.00126187 Jy ! Component: 200 - total flux cleaned = -0.00114393 Jy ! Total flux subtracted in 200 components = -0.00114393 Jy ! Clean residual min=-0.002939 max=0.002801 Jy/beam ! Clean residual mean=-0.000003 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.133523 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 127 components and 0.133523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069034Jy sigma=0.961877 ! Fit after self-cal, rms=0.069007Jy sigma=0.960781 wmodel J1526-0425_X_2005_07_09_yyk\_map.mod ! Writing 127 model components to file: J1526-0425_X_2005_07_09_yyk_map.mod wobs J1526-0425_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J1526-0425_X_2005_07_09_yyk_uvs.fits wwins J1526-0425_X_2005_07_09_yyk\_map.win ! wwins: Wrote 4 windows to J1526-0425_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000600111 Jy ! Component: 100 - total flux cleaned = -0.00084916 Jy ! Component: 150 - total flux cleaned = -0.000941879 Jy ! Component: 200 - total flux cleaned = -0.000853124 Jy ! Component: 250 - total flux cleaned = -0.000684573 Jy ! Component: 300 - total flux cleaned = -0.000521394 Jy ! Component: 350 - total flux cleaned = -0.00036357 Jy ! Component: 400 - total flux cleaned = -0.000249069 Jy ! Component: 450 - total flux cleaned = -0.00021116 Jy ! Component: 500 - total flux cleaned = -0.000137981 Jy ! Component: 550 - total flux cleaned = -0.000173245 Jy ! Component: 600 - total flux cleaned = -0.000312764 Jy ! Component: 650 - total flux cleaned = -0.000585308 Jy ! Component: 700 - total flux cleaned = -0.000785364 Jy ! Component: 750 - total flux cleaned = -0.000948493 Jy ! Component: 800 - total flux cleaned = -0.0012061 Jy ! Component: 850 - total flux cleaned = -0.00136463 Jy ! Component: 900 - total flux cleaned = -0.0015826 Jy ! Component: 950 - total flux cleaned = -0.0015829 Jy ! Component: 1000 - total flux cleaned = -0.00173506 Jy ! Component: 1050 - total flux cleaned = -0.00182472 Jy ! Component: 1100 - total flux cleaned = -0.00185423 Jy ! Component: 1150 - total flux cleaned = -0.00200021 Jy ! Component: 1200 - total flux cleaned = -0.00197171 Jy ! Component: 1250 - total flux cleaned = -0.00214299 Jy ! Component: 1300 - total flux cleaned = -0.00222747 Jy ! Component: 1350 - total flux cleaned = -0.00242228 Jy ! Component: 1400 - total flux cleaned = -0.00253208 Jy ! Component: 1450 - total flux cleaned = -0.00261339 Jy ! Component: 1500 - total flux cleaned = -0.00274721 Jy ! Component: 1550 - total flux cleaned = -0.00285306 Jy ! Component: 1600 - total flux cleaned = -0.00285258 Jy ! Component: 1650 - total flux cleaned = -0.00295652 Jy ! Component: 1700 - total flux cleaned = -0.00313617 Jy ! Component: 1750 - total flux cleaned = -0.00321229 Jy ! Component: 1800 - total flux cleaned = -0.00323761 Jy ! Component: 1850 - total flux cleaned = -0.00323759 Jy ! Component: 1900 - total flux cleaned = -0.00331203 Jy ! Component: 1950 - total flux cleaned = -0.00336115 Jy ! Component: 2000 - total flux cleaned = -0.00333725 Jy ! Total flux subtracted in 2048 components = -0.00340942 Jy ! Clean residual min=-0.001449 max=0.001752 Jy/beam ! Clean residual mean=-0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.130114 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 261 components and 0.130114 Jy ![Exited script file: muppet] wmap "J1526-0425_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.003 x 2.514 at 12.76 degrees (North through East) ! Clean map min=-0.0027827 max=0.098159 Jy/beam ! Writing clean map to FITS file: J1526-0425_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0981594 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000455723 device "J1526-0425_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J1526-0425_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.3928 1.3928 2.78561 5.57122 11.1424 22.2849 44.5697 89.1395 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.003 x 2.514 at 12.76 degrees (North through East) ! Clean map min=-0.0027827 max=0.098159 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1526-0425_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J1526-0425_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1526-0425_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:38:24 2006