! Started logfile: J1424-1407_X_2005_07_08_yyk_uvs.log on Fri Jan 20 10:35:03 2006 obs J1424-1407_X_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1424-1407_X_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1424-1407 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1407 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1424-1407_X_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.163675 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.673 mas, bmaj=1.729 mas, bpa=-1.869 degrees ! Estimated noise=1.46991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.114276 Jy ! Component: 100 - total flux cleaned = 0.140256 Jy ! Total flux subtracted in 100 components = 0.140256 Jy ! Clean residual min=-0.009256 max=0.011507 Jy/beam ! Clean residual mean=0.000009 rms=0.002553 Jy/beam ! Combined flux in latest and established models = 0.140256 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.140256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.083282Jy sigma=1.149324 ! Fit after self-cal, rms=0.078933Jy sigma=1.116453 ! Inverting map and beam ! Estimated beam: bmin=0.6731 mas, bmaj=1.729 mas, bpa=-1.868 degrees ! Estimated noise=1.47962 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8883 mas, bmaj=2.151 mas, bpa=-1.31 degrees ! Estimated noise=0.989063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181671 Jy ! Component: 100 - total flux cleaned = 0.0236106 Jy ! Component: 150 - total flux cleaned = 0.0256308 Jy ! Component: 200 - total flux cleaned = 0.0259401 Jy ! Total flux subtracted in 200 components = 0.0259401 Jy ! Clean residual min=-0.004688 max=0.004315 Jy/beam ! Clean residual mean=0.000014 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.166196 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.166196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077106Jy sigma=1.059069 ! Fit after self-cal, rms=0.077110Jy sigma=1.058854 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8883 x 2.151 at -1.31 degrees (North through East) ! Clean map min=-0.0042447 max=0.14447 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00414 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 1.13 KP 0.95 ! LA 1.05 MK 1.00 NL 0.99 OV 1.00 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00534 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.18 KP 0.94 ! LA 1.01 MK 0.91 NL 0.96 OV 0.99 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.077110Jy sigma=1.058854 ! Fit after self-cal, rms=0.076878Jy sigma=1.049057 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076878Jy sigma=1.049057 ! Fit after self-cal, rms=0.076881Jy sigma=1.049044 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8782 mas, bmaj=2.122 mas, bpa=-1.058 degrees ! Estimated noise=0.976436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000241613 Jy ! Component: 100 - total flux cleaned = -0.00010355 Jy ! Component: 150 - total flux cleaned = -0.00010475 Jy ! Component: 200 - total flux cleaned = -0.000104813 Jy ! Total flux subtracted in 200 components = -0.000104813 Jy ! Clean residual min=-0.004069 max=0.004101 Jy/beam ! Clean residual mean=0.000015 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.166091 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.166091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076810Jy sigma=1.048157 ! Fit after self-cal, rms=0.076812Jy sigma=1.048138 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076812Jy sigma=1.048138 ! Fit after self-cal, rms=0.071365Jy sigma=0.990721 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000967153 Jy ! Component: 100 - total flux cleaned = 0.0010321 Jy ! Component: 150 - total flux cleaned = 0.00105952 Jy ! Component: 200 - total flux cleaned = 0.00110719 Jy ! Total flux subtracted in 200 components = 0.00110719 Jy ! Clean residual min=-0.004057 max=0.003842 Jy/beam ! Clean residual mean=0.000014 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.167199 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.167199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071362Jy sigma=0.990230 ! Fit after self-cal, rms=0.071060Jy sigma=0.986758 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8782 x 2.122 at -1.058 degrees (North through East) ! Clean map min=-0.0038268 max=0.14406 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071060Jy sigma=0.986758 ! Fit after self-cal, rms=0.069878Jy sigma=0.977288 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069878Jy sigma=0.977288 ! Fit after self-cal, rms=0.069871Jy sigma=0.976920 ! Inverting map and beam ! Estimated beam: bmin=0.8682 mas, bmaj=2.116 mas, bpa=-0.8319 degrees ! Estimated noise=0.961302 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010002 Jy ! Component: 100 - total flux cleaned = -0.000972625 Jy ! Component: 150 - total flux cleaned = -0.000925056 Jy ! Component: 200 - total flux cleaned = -0.000857885 Jy ! Total flux subtracted in 200 components = -0.000857885 Jy ! Clean residual min=-0.003372 max=0.003795 Jy/beam ! Clean residual mean=0.000011 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.166341 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.166341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069842Jy sigma=0.976315 ! Fit after self-cal, rms=0.069846Jy sigma=0.976264 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069846Jy sigma=0.976264 ! Fit after self-cal, rms=0.069214Jy sigma=0.971901 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069214Jy sigma=0.971901 ! Fit after self-cal, rms=0.069227Jy sigma=0.971868 ! Inverting map and beam ! Estimated beam: bmin=0.8573 mas, bmaj=2.109 mas, bpa=-1.134 degrees ! Estimated noise=0.955009 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149832 Jy ! Component: 100 - total flux cleaned = -5.79335e-06 Jy ! Component: 150 - total flux cleaned = 7.38272e-05 Jy ! Component: 200 - total flux cleaned = 0.000140236 Jy ! Total flux subtracted in 200 components = 0.000140236 Jy ! Clean residual min=-0.003290 max=0.003772 Jy/beam ! Clean residual mean=0.000006 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.166481 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.166481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069201Jy sigma=0.971355 ! Fit after self-cal, rms=0.069205Jy sigma=0.971341 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.349 mas, bmaj=4.459 mas, bpa=2.176 degrees ! Estimated noise=1.2359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136626 Jy ! Component: 100 - total flux cleaned = 8.98365e-05 Jy ! Component: 150 - total flux cleaned = 5.22395e-05 Jy ! Component: 200 - total flux cleaned = 2.00498e-05 Jy ! Total flux subtracted in 200 components = 2.00498e-05 Jy ! Clean residual min=-0.003511 max=0.004055 Jy/beam ! Clean residual mean=0.000011 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.166501 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.166501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069232Jy sigma=0.971578 ! Fit after self-cal, rms=0.069230Jy sigma=0.971478 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6675 mas, bmaj=1.72 mas, bpa=-1.561 degrees ! Estimated noise=1.42572 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115748 Jy ! Component: 100 - total flux cleaned = 0.141828 Jy ! Component: 150 - total flux cleaned = 0.153353 Jy ! Component: 200 - total flux cleaned = 0.159333 Jy ! Total flux subtracted in 200 components = 0.159333 Jy ! Clean residual min=-0.005953 max=0.006751 Jy/beam ! Clean residual mean=0.000003 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.159333 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.159333 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8573 mas, bmaj=2.109 mas, bpa=-1.134 degrees ! Estimated noise=0.955009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 0.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520589 Jy ! Component: 100 - total flux cleaned = 0.00609715 Jy ! Component: 150 - total flux cleaned = 0.00628159 Jy ! Component: 200 - total flux cleaned = 0.00644526 Jy ! Total flux subtracted in 200 components = 0.00644526 Jy ! Clean residual min=-0.003465 max=0.003961 Jy/beam ! Clean residual mean=0.000007 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.165778 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 46 components and 0.165778 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.349 mas, bmaj=4.459 mas, bpa=2.176 degrees ! Estimated noise=1.2359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.66673e-05 Jy ! Component: 100 - total flux cleaned = -3.81171e-05 Jy ! Component: 150 - total flux cleaned = -0.000127689 Jy ! Component: 200 - total flux cleaned = -0.000181973 Jy ! Total flux subtracted in 200 components = -0.000181973 Jy ! Clean residual min=-0.003716 max=0.003914 Jy/beam ! Clean residual mean=0.000013 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.165596 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.165596 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8573 mas, bmaj=2.109 mas, bpa=-1.134 degrees ! Estimated noise=0.955009 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124046 Jy ! Component: 100 - total flux cleaned = 0.000176729 Jy ! Component: 150 - total flux cleaned = 0.000223829 Jy ! Component: 200 - total flux cleaned = 0.00022282 Jy ! Total flux subtracted in 200 components = 0.00022282 Jy ! Clean residual min=-0.003430 max=0.003819 Jy/beam ! Clean residual mean=0.000007 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.165819 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.165819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068974Jy sigma=0.968934 ! Fit after self-cal, rms=0.068956Jy sigma=0.968553 wmodel J1424-1407_X_2005_07_08_yyk\_map.mod ! Writing 68 model components to file: J1424-1407_X_2005_07_08_yyk_map.mod wobs J1424-1407_X_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1424-1407_X_2005_07_08_yyk_uvs.fits wwins J1424-1407_X_2005_07_08_yyk\_map.win ! wwins: Wrote 2 windows to J1424-1407_X_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170263 Jy ! Component: 100 - total flux cleaned = 0.00243666 Jy ! Component: 150 - total flux cleaned = 0.00300286 Jy ! Component: 200 - total flux cleaned = 0.00359311 Jy ! Component: 250 - total flux cleaned = 0.00415989 Jy ! Component: 300 - total flux cleaned = 0.0047549 Jy ! Component: 350 - total flux cleaned = 0.00504236 Jy ! Component: 400 - total flux cleaned = 0.00513624 Jy ! Component: 450 - total flux cleaned = 0.00531987 Jy ! Component: 500 - total flux cleaned = 0.00554416 Jy ! Component: 550 - total flux cleaned = 0.00571981 Jy ! Component: 600 - total flux cleaned = 0.00584955 Jy ! Component: 650 - total flux cleaned = 0.00606003 Jy ! Component: 700 - total flux cleaned = 0.00618285 Jy ! Component: 750 - total flux cleaned = 0.00626336 Jy ! Component: 800 - total flux cleaned = 0.00634364 Jy ! Component: 850 - total flux cleaned = 0.00646139 Jy ! Component: 900 - total flux cleaned = 0.00661565 Jy ! Component: 950 - total flux cleaned = 0.00665364 Jy ! Component: 1000 - total flux cleaned = 0.00680324 Jy ! Component: 1050 - total flux cleaned = 0.00691365 Jy ! Component: 1100 - total flux cleaned = 0.00698559 Jy ! Component: 1150 - total flux cleaned = 0.00702141 Jy ! Component: 1200 - total flux cleaned = 0.00709184 Jy ! Component: 1250 - total flux cleaned = 0.00730006 Jy ! Component: 1300 - total flux cleaned = 0.00729992 Jy ! Component: 1350 - total flux cleaned = 0.00726583 Jy ! Component: 1400 - total flux cleaned = 0.00726615 Jy ! Component: 1450 - total flux cleaned = 0.00736541 Jy ! Component: 1500 - total flux cleaned = 0.00746332 Jy ! Component: 1550 - total flux cleaned = 0.00746326 Jy ! Component: 1600 - total flux cleaned = 0.00755829 Jy ! Component: 1650 - total flux cleaned = 0.0076523 Jy ! Component: 1700 - total flux cleaned = 0.00762127 Jy ! Component: 1750 - total flux cleaned = 0.00768317 Jy ! Component: 1800 - total flux cleaned = 0.00780466 Jy ! Component: 1850 - total flux cleaned = 0.00786458 Jy ! Component: 1900 - total flux cleaned = 0.00783452 Jy ! Component: 1950 - total flux cleaned = 0.00789328 Jy ! Component: 2000 - total flux cleaned = 0.00792234 Jy ! Total flux subtracted in 2048 components = 0.0078935 Jy ! Clean residual min=-0.001531 max=0.001700 Jy/beam ! Clean residual mean=0.000004 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.173712 Jy keep ! Adding 154 model components to the UV plane model. ! The established model now contains 222 components and 0.173712 Jy ![Exited script file: muppet] wmap "J1424-1407_X_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8573 x 2.109 at -1.134 degrees (North through East) ! Clean map min=-0.0026015 max=0.14066 Jy/beam ! Writing clean map to FITS file: J1424-1407_X_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140661 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000552229 device "J1424-1407_X_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1424-1407_X_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17779 1.17779 2.35558 4.71116 9.42232 18.8446 37.6893 75.3785 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8573 x 2.109 at -1.134 degrees (North through East) ! Clean map min=-0.0026015 max=0.14066 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1424-1407_X_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1424-1407_X_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1424-1407_X_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:35:07 2006