! Started logfile: J1356-1101_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:32:23 2006 obs J1356-1101_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J1356-1101_S_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.946667 visibilities/baseline/integration-bin. ! Found source: J1356-1101 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1356-1101_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.167565 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=6.634 mas, bpa=0.5881 degrees ! Estimated noise=1.45759 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.113104 Jy ! Component: 100 - total flux cleaned = 0.155718 Jy ! Total flux subtracted in 100 components = 0.155718 Jy ! Clean residual min=-0.008904 max=0.019514 Jy/beam ! Clean residual mean=0.000087 rms=0.002634 Jy/beam ! Combined flux in latest and established models = 0.155718 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.155718 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.075789Jy sigma=1.229014 ! Fit after self-cal, rms=0.075143Jy sigma=1.220979 ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=6.634 mas, bpa=0.5827 degrees ! Estimated noise=1.45745 mJy/beam. ! Added new window around map position (3, 1.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226514 Jy ! Component: 100 - total flux cleaned = 0.0332112 Jy ! Total flux subtracted in 100 components = 0.0332112 Jy ! Clean residual min=-0.006727 max=0.008509 Jy/beam ! Clean residual mean=0.000026 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.188929 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.188929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068844Jy sigma=1.096126 ! Fit after self-cal, rms=0.068696Jy sigma=1.092801 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=8.94 mas, bpa=4.447 degrees ! Estimated noise=0.986976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520449 Jy ! Component: 100 - total flux cleaned = 0.00571637 Jy ! Component: 150 - total flux cleaned = 0.00612528 Jy ! Component: 200 - total flux cleaned = 0.00652487 Jy ! Total flux subtracted in 200 components = 0.00652487 Jy ! Clean residual min=-0.005109 max=0.008710 Jy/beam ! Clean residual mean=0.000082 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.195454 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.195454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068056Jy sigma=1.084169 ! Fit after self-cal, rms=0.068024Jy sigma=1.083816 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.696 x 8.94 at 4.447 degrees (North through East) ! Clean map min=-0.0049426 max=0.1363 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.068024Jy sigma=1.083816 ! Fit after self-cal, rms=0.068024Jy sigma=1.083816 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068024Jy sigma=1.083816 ! Fit after self-cal, rms=0.068012Jy sigma=1.083660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=8.94 mas, bpa=4.447 degrees ! Estimated noise=0.986976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00868596 Jy ! Component: 100 - total flux cleaned = 0.00989513 Jy ! Component: 150 - total flux cleaned = 0.0102653 Jy ! Component: 200 - total flux cleaned = 0.0103717 Jy ! Total flux subtracted in 200 components = 0.0103717 Jy ! Clean residual min=-0.004294 max=0.004750 Jy/beam ! Clean residual mean=0.000029 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.205825 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 84 components and 0.205825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067245Jy sigma=1.063055 ! Fit after self-cal, rms=0.067143Jy sigma=1.061842 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067143Jy sigma=1.061842 ! Fit after self-cal, rms=0.064371Jy sigma=1.018572 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188252 Jy ! Component: 100 - total flux cleaned = 0.00188622 Jy ! Component: 150 - total flux cleaned = 0.0017937 Jy ! Component: 200 - total flux cleaned = 0.00171756 Jy ! Total flux subtracted in 200 components = 0.00171756 Jy ! Clean residual min=-0.003979 max=0.004347 Jy/beam ! Clean residual mean=0.000023 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.207543 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 0.207543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064121Jy sigma=1.014589 ! Fit after self-cal, rms=0.063839Jy sigma=1.011029 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.696 x 8.94 at 4.447 degrees (North through East) ! Clean map min=-0.003817 max=0.13865 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063839Jy sigma=1.011029 ! Fit after self-cal, rms=0.061732Jy sigma=0.974453 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061732Jy sigma=0.974453 ! Fit after self-cal, rms=0.061703Jy sigma=0.973941 ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=8.893 mas, bpa=4.202 degrees ! Estimated noise=0.986659 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167401 Jy ! Component: 100 - total flux cleaned = 0.00141786 Jy ! Component: 150 - total flux cleaned = 0.00141881 Jy ! Component: 200 - total flux cleaned = 0.00127616 Jy ! Total flux subtracted in 200 components = 0.00127616 Jy ! Clean residual min=-0.003984 max=0.003515 Jy/beam ! Clean residual mean=0.000049 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.208819 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.208819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061501Jy sigma=0.970585 ! Fit after self-cal, rms=0.061446Jy sigma=0.970208 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061446Jy sigma=0.970208 ! Fit after self-cal, rms=0.061700Jy sigma=0.969059 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061700Jy sigma=0.969059 ! Fit after self-cal, rms=0.061684Jy sigma=0.968959 ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=8.828 mas, bpa=4.582 degrees ! Estimated noise=0.989624 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251583 Jy ! Component: 100 - total flux cleaned = 0.00252188 Jy ! Component: 150 - total flux cleaned = 0.00245793 Jy ! Component: 200 - total flux cleaned = 0.00227212 Jy ! Total flux subtracted in 200 components = 0.00227212 Jy ! Clean residual min=-0.003985 max=0.003282 Jy/beam ! Clean residual mean=0.000037 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.211091 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 132 components and 0.211091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061497Jy sigma=0.966090 ! Fit after self-cal, rms=0.061447Jy sigma=0.965849 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.121 mas, bmaj=15.33 mas, bpa=6.895 degrees ! Estimated noise=1.19429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159654 Jy ! Component: 100 - total flux cleaned = -3.47292e-05 Jy ! Component: 150 - total flux cleaned = -0.000190252 Jy ! Component: 200 - total flux cleaned = -0.000244473 Jy ! Total flux subtracted in 200 components = -0.000244473 Jy ! Clean residual min=-0.004127 max=0.003549 Jy/beam ! Clean residual mean=0.000070 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.210847 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 145 components and 0.210847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061435Jy sigma=0.965529 ! Fit after self-cal, rms=0.061416Jy sigma=0.965406 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=6.607 mas, bpa=0.6429 degrees ! Estimated noise=1.44307 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.113333 Jy ! Component: 100 - total flux cleaned = 0.157292 Jy ! Component: 150 - total flux cleaned = 0.179997 Jy ! Component: 200 - total flux cleaned = 0.193566 Jy ! Total flux subtracted in 200 components = 0.193566 Jy ! Clean residual min=-0.006287 max=0.006844 Jy/beam ! Clean residual mean=0.000036 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.193566 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.193566 Jy ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=8.828 mas, bpa=4.582 degrees ! Estimated noise=0.989624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110961 Jy ! Component: 100 - total flux cleaned = 0.0148183 Jy ! Component: 150 - total flux cleaned = 0.0162384 Jy ! Component: 200 - total flux cleaned = 0.016667 Jy ! Total flux subtracted in 200 components = 0.016667 Jy ! Clean residual min=-0.004263 max=0.003344 Jy/beam ! Clean residual mean=0.000039 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.210233 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 71 components and 0.210233 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.121 mas, bmaj=15.33 mas, bpa=6.895 degrees ! Estimated noise=1.19429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108442 Jy ! Component: 100 - total flux cleaned = 0.00123139 Jy ! Component: 150 - total flux cleaned = 0.00105567 Jy ! Component: 200 - total flux cleaned = 0.00100426 Jy ! Total flux subtracted in 200 components = 0.00100426 Jy ! Clean residual min=-0.004128 max=0.003700 Jy/beam ! Clean residual mean=0.000065 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.211237 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 0.211237 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=8.828 mas, bpa=4.582 degrees ! Estimated noise=0.989624 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849973 Jy ! Component: 100 - total flux cleaned = -0.00125057 Jy ! Component: 150 - total flux cleaned = -0.00134019 Jy ! Component: 200 - total flux cleaned = -0.00134612 Jy ! Total flux subtracted in 200 components = -0.00134612 Jy ! Clean residual min=-0.004040 max=0.003592 Jy/beam ! Clean residual mean=0.000040 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.209891 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 113 components and 0.209891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061347Jy sigma=0.962730 ! Fit after self-cal, rms=0.061120Jy sigma=0.960944 wmodel J1356-1101_S_2005_07_09_yyk\_map.mod ! Writing 113 model components to file: J1356-1101_S_2005_07_09_yyk_map.mod wobs J1356-1101_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J1356-1101_S_2005_07_09_yyk_uvs.fits wwins J1356-1101_S_2005_07_09_yyk\_map.win ! wwins: Wrote 4 windows to J1356-1101_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133563 Jy ! Component: 100 - total flux cleaned = -0.00211504 Jy ! Component: 150 - total flux cleaned = -0.00244983 Jy ! Component: 200 - total flux cleaned = -0.00244977 Jy ! Component: 250 - total flux cleaned = -0.00249993 Jy ! Component: 300 - total flux cleaned = -0.00240219 Jy ! Component: 350 - total flux cleaned = -0.00259279 Jy ! Component: 400 - total flux cleaned = -0.00282363 Jy ! Component: 450 - total flux cleaned = -0.00304811 Jy ! Component: 500 - total flux cleaned = -0.00326655 Jy ! Component: 550 - total flux cleaned = -0.00330922 Jy ! Component: 600 - total flux cleaned = -0.00347559 Jy ! Component: 650 - total flux cleaned = -0.0035971 Jy ! Component: 700 - total flux cleaned = -0.00387494 Jy ! Component: 750 - total flux cleaned = -0.00410789 Jy ! Component: 800 - total flux cleaned = -0.00418348 Jy ! Component: 850 - total flux cleaned = -0.00433378 Jy ! Component: 900 - total flux cleaned = -0.00459124 Jy ! Component: 950 - total flux cleaned = -0.00469885 Jy ! Component: 1000 - total flux cleaned = -0.00484121 Jy ! Component: 1050 - total flux cleaned = -0.00505199 Jy ! Component: 1100 - total flux cleaned = -0.00512185 Jy ! Component: 1150 - total flux cleaned = -0.00539548 Jy ! Component: 1200 - total flux cleaned = -0.00563093 Jy ! Component: 1250 - total flux cleaned = -0.00583063 Jy ! Component: 1300 - total flux cleaned = -0.00599535 Jy ! Component: 1350 - total flux cleaned = -0.0061579 Jy ! Component: 1400 - total flux cleaned = -0.00625409 Jy ! Component: 1450 - total flux cleaned = -0.00641263 Jy ! Component: 1500 - total flux cleaned = -0.00656954 Jy ! Component: 1550 - total flux cleaned = -0.00669296 Jy ! Component: 1600 - total flux cleaned = -0.00681528 Jy ! Component: 1650 - total flux cleaned = -0.00690602 Jy ! Component: 1700 - total flux cleaned = -0.00690636 Jy ! Component: 1750 - total flux cleaned = -0.00702566 Jy ! Component: 1800 - total flux cleaned = -0.0071727 Jy ! Component: 1850 - total flux cleaned = -0.00728892 Jy ! Component: 1900 - total flux cleaned = -0.00737491 Jy ! Component: 1950 - total flux cleaned = -0.0073187 Jy ! Component: 2000 - total flux cleaned = -0.00740362 Jy ! Total flux subtracted in 2048 components = -0.00743162 Jy ! Clean residual min=-0.001760 max=0.001419 Jy/beam ! Clean residual mean=-0.000001 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.20246 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 250 components and 0.20246 Jy ![Exited script file: muppet] wmap "J1356-1101_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.628 x 8.828 at 4.582 degrees (North through East) ! Clean map min=-0.0032107 max=0.13949 Jy/beam ! Writing clean map to FITS file: J1356-1101_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.139487 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00058004 device "J1356-1101_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J1356-1101_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24751 1.24751 2.49502 4.99004 9.98007 19.9601 39.9203 79.8406 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.139 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.628 x 8.828 at 4.582 degrees (North through East) ! Clean map min=-0.0032107 max=0.13949 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1356-1101_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J1356-1101_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1356-1101_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:32:27 2006