! Started logfile: J1349-1110_X_2005_07_08_yyk_uvs.log on Fri Jan 20 10:31:54 2006 obs J1349-1110_X_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1349-1110_X_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1349-1110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1407 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1349-1110_X_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.139754 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6809 mas, bmaj=1.71 mas, bpa=2.015 degrees ! Estimated noise=1.32161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.105719 Jy ! Component: 100 - total flux cleaned = 0.123905 Jy ! Total flux subtracted in 100 components = 0.123905 Jy ! Clean residual min=-0.006195 max=0.006435 Jy/beam ! Clean residual mean=-0.000010 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.123905 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.123905 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.060589Jy sigma=1.127728 ! Fit after self-cal, rms=0.060626Jy sigma=1.107933 ! Inverting map and beam ! Estimated beam: bmin=0.6809 mas, bmaj=1.71 mas, bpa=2.015 degrees ! Estimated noise=1.32161 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8561 mas, bmaj=2.053 mas, bpa=2.049 degrees ! Estimated noise=0.967224 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100409 Jy ! Component: 100 - total flux cleaned = 0.013509 Jy ! Component: 150 - total flux cleaned = 0.0140303 Jy ! Component: 200 - total flux cleaned = 0.0141546 Jy ! Total flux subtracted in 200 components = 0.0141546 Jy ! Clean residual min=-0.005546 max=0.005355 Jy/beam ! Clean residual mean=-0.000001 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.138059 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.138059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060003Jy sigma=1.084811 ! Fit after self-cal, rms=0.059978Jy sigma=1.085558 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8561 x 2.053 at 2.049 degrees (North through East) ! Clean map min=-0.0050397 max=0.12418 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02032 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.98 HN 1.00* KP 0.96 ! LA 1.01 MK 1.06 NL 0.99 OV 1.00 ! PT 0.99 SC 0.92 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0039 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.00* KP 0.88 ! LA 0.99 MK 1.02 NL 1.07 OV 0.97 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.059978Jy sigma=1.085558 ! Fit after self-cal, rms=0.059573Jy sigma=1.076916 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059573Jy sigma=1.076916 ! Fit after self-cal, rms=0.059586Jy sigma=1.074860 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8574 mas, bmaj=2.05 mas, bpa=3.668 degrees ! Estimated noise=0.962422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000533381 Jy ! Component: 100 - total flux cleaned = -0.000538988 Jy ! Component: 150 - total flux cleaned = -0.000541928 Jy ! Component: 200 - total flux cleaned = -0.000543983 Jy ! Total flux subtracted in 200 components = -0.000543983 Jy ! Clean residual min=-0.004921 max=0.005231 Jy/beam ! Clean residual mean=-0.000002 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.137515 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.137516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059592Jy sigma=1.071642 ! Fit after self-cal, rms=0.059564Jy sigma=1.071962 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059564Jy sigma=1.071962 ! Fit after self-cal, rms=0.055916Jy sigma=0.989903 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000900767 Jy ! Component: 100 - total flux cleaned = 0.00101423 Jy ! Component: 150 - total flux cleaned = 0.00106078 Jy ! Component: 200 - total flux cleaned = 0.00102231 Jy ! Total flux subtracted in 200 components = 0.00102231 Jy ! Clean residual min=-0.004552 max=0.004471 Jy/beam ! Clean residual mean=-0.000002 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.138538 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.138538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055892Jy sigma=0.988010 ! Fit after self-cal, rms=0.055340Jy sigma=0.980558 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8574 x 2.05 at 3.668 degrees (North through East) ! Clean map min=-0.0041195 max=0.12584 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055340Jy sigma=0.980558 ! Fit after self-cal, rms=0.055124Jy sigma=0.969730 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055124Jy sigma=0.969730 ! Fit after self-cal, rms=0.055024Jy sigma=0.968721 ! Inverting map and beam ! Estimated beam: bmin=0.8615 mas, bmaj=2.065 mas, bpa=3.214 degrees ! Estimated noise=0.959751 mJy/beam. ! Added new window around map position (-7, -6.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289313 Jy ! Component: 100 - total flux cleaned = 0.00302637 Jy ! Component: 150 - total flux cleaned = 0.00291691 Jy ! Component: 200 - total flux cleaned = 0.00282876 Jy ! Total flux subtracted in 200 components = 0.00282876 Jy ! Clean residual min=-0.003865 max=0.003568 Jy/beam ! Clean residual mean=-0.000001 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.141367 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.141367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054776Jy sigma=0.958106 ! Fit after self-cal, rms=0.054761Jy sigma=0.957470 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054761Jy sigma=0.957470 ! Fit after self-cal, rms=0.055049Jy sigma=0.946756 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055049Jy sigma=0.946756 ! Fit after self-cal, rms=0.055052Jy sigma=0.946597 ! Inverting map and beam ! Estimated beam: bmin=0.8618 mas, bmaj=2.069 mas, bpa=3.095 degrees ! Estimated noise=0.961632 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118994 Jy ! Component: 100 - total flux cleaned = 0.00126728 Jy ! Component: 150 - total flux cleaned = 0.00133394 Jy ! Component: 200 - total flux cleaned = 0.00139622 Jy ! Total flux subtracted in 200 components = 0.00139622 Jy ! Clean residual min=-0.003605 max=0.003539 Jy/beam ! Clean residual mean=-0.000005 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.142763 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 0.142763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055004Jy sigma=0.943601 ! Fit after self-cal, rms=0.055016Jy sigma=0.943486 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=4.442 mas, bpa=5.857 degrees ! Estimated noise=1.22595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135961 Jy ! Component: 100 - total flux cleaned = -0.000197581 Jy ! Component: 150 - total flux cleaned = -0.000248656 Jy ! Component: 200 - total flux cleaned = -0.000287787 Jy ! Total flux subtracted in 200 components = -0.000287787 Jy ! Clean residual min=-0.003310 max=0.003006 Jy/beam ! Clean residual mean=-0.000011 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.142475 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.142475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055027Jy sigma=0.943621 ! Fit after self-cal, rms=0.055022Jy sigma=0.943514 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6821 mas, bmaj=1.722 mas, bpa=2.081 degrees ! Estimated noise=1.33103 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.108049 Jy ! Component: 100 - total flux cleaned = 0.126304 Jy ! Component: 150 - total flux cleaned = 0.135024 Jy ! Component: 200 - total flux cleaned = 0.138188 Jy ! Total flux subtracted in 200 components = 0.138188 Jy ! Clean residual min=-0.005537 max=0.005421 Jy/beam ! Clean residual mean=-0.000004 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 0.138188 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.138188 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8618 mas, bmaj=2.069 mas, bpa=3.095 degrees ! Estimated noise=0.961632 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407508 Jy ! Component: 100 - total flux cleaned = 0.0046058 Jy ! Component: 150 - total flux cleaned = 0.00481287 Jy ! Component: 200 - total flux cleaned = 0.0049034 Jy ! Total flux subtracted in 200 components = 0.0049034 Jy ! Clean residual min=-0.004102 max=0.003659 Jy/beam ! Clean residual mean=-0.000005 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.143092 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.143092 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=4.442 mas, bpa=5.857 degrees ! Estimated noise=1.22595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138913 Jy ! Component: 100 - total flux cleaned = -4.3272e-05 Jy ! Component: 150 - total flux cleaned = -7.53926e-05 Jy ! Component: 200 - total flux cleaned = -9.68923e-05 Jy ! Total flux subtracted in 200 components = -9.68923e-05 Jy ! Clean residual min=-0.003256 max=0.003072 Jy/beam ! Clean residual mean=-0.000010 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.142995 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.142995 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8618 mas, bmaj=2.069 mas, bpa=3.095 degrees ! Estimated noise=0.961632 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059192 Jy ! Component: 100 - total flux cleaned = 0.000661281 Jy ! Component: 150 - total flux cleaned = 0.000662016 Jy ! Component: 200 - total flux cleaned = 0.000662673 Jy ! Total flux subtracted in 200 components = 0.000662673 Jy ! Clean residual min=-0.003811 max=0.003493 Jy/beam ! Clean residual mean=-0.000004 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.143657 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.143657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055013Jy sigma=0.944427 ! Fit after self-cal, rms=0.055040Jy sigma=0.944081 wmodel J1349-1110_X_2005_07_08_yyk\_map.mod ! Writing 69 model components to file: J1349-1110_X_2005_07_08_yyk_map.mod wobs J1349-1110_X_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1349-1110_X_2005_07_08_yyk_uvs.fits wwins J1349-1110_X_2005_07_08_yyk\_map.win ! wwins: Wrote 2 windows to J1349-1110_X_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000878465 Jy ! Component: 100 - total flux cleaned = -0.0014259 Jy ! Component: 150 - total flux cleaned = -0.00177206 Jy ! Component: 200 - total flux cleaned = -0.00210057 Jy ! Component: 250 - total flux cleaned = -0.00241268 Jy ! Component: 300 - total flux cleaned = -0.0027136 Jy ! Component: 350 - total flux cleaned = -0.00309808 Jy ! Component: 400 - total flux cleaned = -0.00323786 Jy ! Component: 450 - total flux cleaned = -0.00328352 Jy ! Component: 500 - total flux cleaned = -0.00328426 Jy ! Component: 550 - total flux cleaned = -0.00332575 Jy ! Component: 600 - total flux cleaned = -0.00328411 Jy ! Component: 650 - total flux cleaned = -0.00336451 Jy ! Component: 700 - total flux cleaned = -0.0034033 Jy ! Component: 750 - total flux cleaned = -0.00344086 Jy ! Component: 800 - total flux cleaned = -0.00340334 Jy ! Component: 850 - total flux cleaned = -0.00336675 Jy ! Component: 900 - total flux cleaned = -0.00322531 Jy ! Component: 950 - total flux cleaned = -0.00315572 Jy ! Component: 1000 - total flux cleaned = -0.00295203 Jy ! Component: 1050 - total flux cleaned = -0.00288549 Jy ! Component: 1100 - total flux cleaned = -0.00268884 Jy ! Component: 1150 - total flux cleaned = -0.00249591 Jy ! Component: 1200 - total flux cleaned = -0.00246501 Jy ! Component: 1250 - total flux cleaned = -0.00249626 Jy ! Component: 1300 - total flux cleaned = -0.00240356 Jy ! Component: 1350 - total flux cleaned = -0.00237309 Jy ! Component: 1400 - total flux cleaned = -0.00234267 Jy ! Component: 1450 - total flux cleaned = -0.00228392 Jy ! Component: 1500 - total flux cleaned = -0.00222602 Jy ! Component: 1550 - total flux cleaned = -0.00222607 Jy ! Component: 1600 - total flux cleaned = -0.0021977 Jy ! Component: 1650 - total flux cleaned = -0.00216935 Jy ! Component: 1700 - total flux cleaned = -0.00214136 Jy ! Component: 1750 - total flux cleaned = -0.00216827 Jy ! Component: 1800 - total flux cleaned = -0.0021688 Jy ! Component: 1850 - total flux cleaned = -0.00224756 Jy ! Component: 1900 - total flux cleaned = -0.00222125 Jy ! Component: 1950 - total flux cleaned = -0.00222134 Jy ! Component: 2000 - total flux cleaned = -0.00229721 Jy ! Total flux subtracted in 2048 components = -0.00229739 Jy ! Clean residual min=-0.001519 max=0.001371 Jy/beam ! Clean residual mean=-0.000001 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.14136 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 211 components and 0.14136 Jy ![Exited script file: muppet] wmap "J1349-1110_X_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8618 x 2.069 at 3.095 degrees (North through East) ! Clean map min=-0.0024339 max=0.12565 Jy/beam ! Writing clean map to FITS file: J1349-1110_X_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.125647 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000446214 device "J1349-1110_X_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1349-1110_X_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0654 1.0654 2.1308 4.26161 8.52322 17.0464 34.0929 68.1857 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.125 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8618 x 2.069 at 3.095 degrees (North through East) ! Clean map min=-0.0024339 max=0.12565 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1349-1110_X_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1349-1110_X_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1349-1110_X_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:31:58 2006