! Started logfile: J1256-2155_X_2005_07_09_yyk_uvs.log on Fri Jan 20 10:28:46 2006 obs J1256-2155_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J1256-2155_X_2005_07_09_yyk_uve.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.951852 visibilities/baseline/integration-bin. ! Found source: J1256-2155 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1480 lines of history. ! ! Reading 1028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1256-2155_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.136889 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8945 mas, bmaj=4.469 mas, bpa=17.61 degrees ! Estimated noise=2.71955 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0821576 Jy ! Component: 100 - total flux cleaned = 0.107725 Jy ! Total flux subtracted in 100 components = 0.107725 Jy ! Clean residual min=-0.016899 max=0.035788 Jy/beam ! Clean residual mean=-0.000200 rms=0.006377 Jy/beam ! Combined flux in latest and established models = 0.107725 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.107725 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.095419Jy sigma=1.618711 ! Fit after self-cal, rms=0.090674Jy sigma=1.586073 ! Inverting map and beam ! Estimated beam: bmin=0.8945 mas, bmaj=4.463 mas, bpa=17.62 degrees ! Estimated noise=2.65332 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.125 mas, bmaj=4.837 mas, bpa=15.95 degrees ! Estimated noise=1.58654 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.4, -3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451033 Jy ! Component: 100 - total flux cleaned = 0.0659587 Jy ! Component: 150 - total flux cleaned = 0.0777543 Jy ! Component: 200 - total flux cleaned = 0.0824038 Jy ! Total flux subtracted in 200 components = 0.0824038 Jy ! Clean residual min=-0.008974 max=0.010426 Jy/beam ! Clean residual mean=0.000010 rms=0.002601 Jy/beam ! Combined flux in latest and established models = 0.190128 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 59 components and 0.190128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075738Jy sigma=1.239038 ! Fit after self-cal, rms=0.074992Jy sigma=1.222926 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.125 x 4.837 at 15.95 degrees (North through East) ! Clean map min=-0.0074889 max=0.099713 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00736 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 HN 1.00* KP 1.05 ! LA 0.88 MK 1.00* NL 0.90 OV 1.11 ! PT 1.11 SC 0.98 ! ! ! Fit before self-cal, rms=0.074992Jy sigma=1.222926 ! Fit after self-cal, rms=0.074405Jy sigma=1.218730 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074405Jy sigma=1.218730 ! Fit after self-cal, rms=0.074412Jy sigma=1.218720 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.125 mas, bmaj=4.767 mas, bpa=16.02 degrees ! Estimated noise=1.58661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783595 Jy ! Component: 100 - total flux cleaned = 0.0116929 Jy ! Component: 150 - total flux cleaned = 0.0121523 Jy ! Component: 200 - total flux cleaned = 0.0118931 Jy ! Total flux subtracted in 200 components = 0.0118931 Jy ! Clean residual min=-0.007985 max=0.007435 Jy/beam ! Clean residual mean=0.000047 rms=0.002095 Jy/beam ! Combined flux in latest and established models = 0.202022 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 93 components and 0.202022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073850Jy sigma=1.203186 ! Fit after self-cal, rms=0.073847Jy sigma=1.202269 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073847Jy sigma=1.202269 ! Fit after self-cal, rms=0.064482Jy sigma=1.033501 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613814 Jy ! Component: 100 - total flux cleaned = 0.00650198 Jy ! Component: 150 - total flux cleaned = 0.00624131 Jy ! Component: 200 - total flux cleaned = 0.00577361 Jy ! Total flux subtracted in 200 components = 0.00577361 Jy ! Clean residual min=-0.007109 max=0.007083 Jy/beam ! Clean residual mean=0.000071 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 0.207795 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 113 components and 0.207795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064096Jy sigma=1.020899 ! Fit after self-cal, rms=0.063717Jy sigma=1.015192 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.125 x 4.767 at 16.02 degrees (North through East) ! Clean map min=-0.0064365 max=0.10459 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063717Jy sigma=1.015192 ! Fit after self-cal, rms=0.063458Jy sigma=1.013941 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063458Jy sigma=1.013941 ! Fit after self-cal, rms=0.063440Jy sigma=1.013483 ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=4.77 mas, bpa=16.07 degrees ! Estimated noise=1.58786 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491054 Jy ! Component: 100 - total flux cleaned = -3.3808e-05 Jy ! Component: 150 - total flux cleaned = -0.00050219 Jy ! Component: 200 - total flux cleaned = -0.000583573 Jy ! Total flux subtracted in 200 components = -0.000583573 Jy ! Clean residual min=-0.006575 max=0.006492 Jy/beam ! Clean residual mean=0.000063 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.207212 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 126 components and 0.207212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063315Jy sigma=1.008945 ! Fit after self-cal, rms=0.063309Jy sigma=1.008708 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063309Jy sigma=1.008708 ! Fit after self-cal, rms=0.062539Jy sigma=1.006394 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062539Jy sigma=1.006394 ! Fit after self-cal, rms=0.062535Jy sigma=1.006220 ! Inverting map and beam ! Estimated beam: bmin=1.102 mas, bmaj=4.721 mas, bpa=16.22 degrees ! Estimated noise=1.53246 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00369356 Jy ! Component: 100 - total flux cleaned = -0.00422204 Jy ! Component: 150 - total flux cleaned = -0.00421667 Jy ! Component: 200 - total flux cleaned = -0.0043349 Jy ! Total flux subtracted in 200 components = -0.0043349 Jy ! Clean residual min=-0.005185 max=0.004965 Jy/beam ! Clean residual mean=0.000046 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.202877 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 147 components and 0.202877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062235Jy sigma=1.001948 ! Fit after self-cal, rms=0.062227Jy sigma=1.001872 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.659 mas, bmaj=5.94 mas, bpa=-0.126 degrees ! Estimated noise=1.76521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.78481e-05 Jy ! Component: 100 - total flux cleaned = 5.29778e-06 Jy ! Component: 150 - total flux cleaned = -9.30445e-05 Jy ! Component: 200 - total flux cleaned = -0.000214191 Jy ! Total flux subtracted in 200 components = -0.000214191 Jy ! Clean residual min=-0.004130 max=0.003801 Jy/beam ! Clean residual mean=0.000071 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.202663 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 171 components and 0.202663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062198Jy sigma=1.001390 ! Fit after self-cal, rms=0.062194Jy sigma=1.001364 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=4.439 mas, bpa=17.69 degrees ! Estimated noise=2.53516 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0955488 Jy ! Component: 100 - total flux cleaned = 0.134942 Jy ! Component: 150 - total flux cleaned = 0.15759 Jy ! Component: 200 - total flux cleaned = 0.171663 Jy ! Total flux subtracted in 200 components = 0.171663 Jy ! Clean residual min=-0.008922 max=0.012062 Jy/beam ! Clean residual mean=-0.000070 rms=0.002855 Jy/beam ! Combined flux in latest and established models = 0.171663 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.171663 Jy ! Inverting map and beam ! Estimated beam: bmin=1.102 mas, bmaj=4.721 mas, bpa=16.22 degrees ! Estimated noise=1.53246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.2, -19.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140953 Jy ! Component: 100 - total flux cleaned = 0.0220888 Jy ! Component: 150 - total flux cleaned = 0.0274201 Jy ! Component: 200 - total flux cleaned = 0.0295385 Jy ! Total flux subtracted in 200 components = 0.0295385 Jy ! Clean residual min=-0.004917 max=0.005169 Jy/beam ! Clean residual mean=0.000016 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.201202 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 82 components and 0.201202 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.659 mas, bmaj=5.94 mas, bpa=-0.126 degrees ! Estimated noise=1.76521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247407 Jy ! Component: 100 - total flux cleaned = 0.00258843 Jy ! Component: 150 - total flux cleaned = 0.00250047 Jy ! Component: 200 - total flux cleaned = 0.00242675 Jy ! Total flux subtracted in 200 components = 0.00242675 Jy ! Clean residual min=-0.004324 max=0.004603 Jy/beam ! Clean residual mean=0.000053 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.203628 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 115 components and 0.203628 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.102 mas, bmaj=4.721 mas, bpa=16.22 degrees ! Estimated noise=1.53246 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113386 Jy ! Component: 100 - total flux cleaned = -0.00145074 Jy ! Component: 150 - total flux cleaned = -0.00145319 Jy ! Component: 200 - total flux cleaned = -0.00153768 Jy ! Total flux subtracted in 200 components = -0.00153768 Jy ! Clean residual min=-0.004397 max=0.004288 Jy/beam ! Clean residual mean=0.000032 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.202091 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 143 components and 0.202091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061379Jy sigma=0.992675 ! Fit after self-cal, rms=0.061381Jy sigma=0.991193 wmodel J1256-2155_X_2005_07_09_yyk\_map.mod ! Writing 143 model components to file: J1256-2155_X_2005_07_09_yyk_map.mod wobs J1256-2155_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J1256-2155_X_2005_07_09_yyk_uvs.fits wwins J1256-2155_X_2005_07_09_yyk\_map.win ! wwins: Wrote 3 windows to J1256-2155_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018428 Jy ! Component: 100 - total flux cleaned = 0.00219891 Jy ! Component: 150 - total flux cleaned = 0.00246268 Jy ! Component: 200 - total flux cleaned = 0.00258396 Jy ! Component: 250 - total flux cleaned = 0.00281652 Jy ! Component: 300 - total flux cleaned = 0.00303883 Jy ! Component: 350 - total flux cleaned = 0.00341259 Jy ! Component: 400 - total flux cleaned = 0.0037217 Jy ! Component: 450 - total flux cleaned = 0.00392295 Jy ! Component: 500 - total flux cleaned = 0.00406923 Jy ! Component: 550 - total flux cleaned = 0.00402195 Jy ! Component: 600 - total flux cleaned = 0.00411606 Jy ! Component: 650 - total flux cleaned = 0.00420757 Jy ! Component: 700 - total flux cleaned = 0.00429596 Jy ! Component: 750 - total flux cleaned = 0.00442702 Jy ! Component: 800 - total flux cleaned = 0.00446971 Jy ! Component: 850 - total flux cleaned = 0.00455406 Jy ! Component: 900 - total flux cleaned = 0.00467805 Jy ! Component: 950 - total flux cleaned = 0.00463771 Jy ! Component: 1000 - total flux cleaned = 0.00463841 Jy ! Component: 1050 - total flux cleaned = 0.00463846 Jy ! Component: 1100 - total flux cleaned = 0.00455945 Jy ! Component: 1150 - total flux cleaned = 0.00452043 Jy ! Component: 1200 - total flux cleaned = 0.0043665 Jy ! Component: 1250 - total flux cleaned = 0.00428959 Jy ! Component: 1300 - total flux cleaned = 0.00413831 Jy ! Component: 1350 - total flux cleaned = 0.0040256 Jy ! Component: 1400 - total flux cleaned = 0.00383988 Jy ! Component: 1450 - total flux cleaned = 0.00369312 Jy ! Component: 1500 - total flux cleaned = 0.00369304 Jy ! Component: 1550 - total flux cleaned = 0.00358425 Jy ! Component: 1600 - total flux cleaned = 0.00351265 Jy ! Component: 1650 - total flux cleaned = 0.00347697 Jy ! Component: 1700 - total flux cleaned = 0.00344153 Jy ! Component: 1750 - total flux cleaned = 0.00340644 Jy ! Component: 1800 - total flux cleaned = 0.00337121 Jy ! Component: 1850 - total flux cleaned = 0.00337113 Jy ! Component: 1900 - total flux cleaned = 0.00326681 Jy ! Component: 1950 - total flux cleaned = 0.00316238 Jy ! Component: 2000 - total flux cleaned = 0.00302337 Jy ! Total flux subtracted in 2048 components = 0.00288411 Jy ! Clean residual min=-0.002707 max=0.001955 Jy/beam ! Clean residual mean=0.000008 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.204975 Jy keep ! Adding 102 model components to the UV plane model. ! The established model now contains 245 components and 0.204975 Jy ![Exited script file: muppet] wmap "J1256-2155_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.102 x 4.721 at 16.22 degrees (North through East) ! Clean map min=-0.0038994 max=0.10429 Jy/beam ! Writing clean map to FITS file: J1256-2155_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10429 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00064789 device "J1256-2155_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J1256-2155_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.86371 1.86371 3.72742 7.45484 14.9097 29.8194 59.6387 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.102 x 4.721 at 16.22 degrees (North through East) ! Clean map min=-0.0038994 max=0.10429 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1256-2155_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J1256-2155_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1256-2155_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:28:50 2006