! Started logfile: J1254-1317_X_2005_07_08_yyk_uvs.log on Fri Jan 20 10:28:37 2006 obs J1254-1317_X_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1254-1317_X_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.874747 visibilities/baseline/integration-bin. ! Found source: J1254-1317 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1407 lines of history. ! ! Reading 1732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1254-1317_X_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.143958 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6932 mas, bmaj=1.709 mas, bpa=2.933 degrees ! Estimated noise=1.40978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.105511 Jy ! Component: 100 - total flux cleaned = 0.126928 Jy ! Total flux subtracted in 100 components = 0.126928 Jy ! Clean residual min=-0.005736 max=0.007674 Jy/beam ! Clean residual mean=0.000047 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.126928 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.126928 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.066826Jy sigma=1.079016 ! Fit after self-cal, rms=0.066095Jy sigma=1.070313 ! Inverting map and beam ! Estimated beam: bmin=0.6933 mas, bmaj=1.71 mas, bpa=2.933 degrees ! Estimated noise=1.40948 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=2.115 mas, bpa=2.15 degrees ! Estimated noise=1.03793 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122135 Jy ! Component: 100 - total flux cleaned = 0.0161459 Jy ! Component: 150 - total flux cleaned = 0.017564 Jy ! Component: 200 - total flux cleaned = 0.0180053 Jy ! Total flux subtracted in 200 components = 0.0180053 Jy ! Clean residual min=-0.004653 max=0.004650 Jy/beam ! Clean residual mean=0.000041 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.144934 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 38 components and 0.144934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064788Jy sigma=1.039251 ! Fit after self-cal, rms=0.064785Jy sigma=1.039077 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8808 x 2.115 at 2.15 degrees (North through East) ! Clean map min=-0.0042133 max=0.12779 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01698 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.00* KP 0.92 ! LA 0.94 MK 0.95 NL 1.02 OV 1.03 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.03137 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.00* KP 0.87 ! LA 1.00 MK 0.88 NL 0.98 OV 0.95 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.989385 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.00* KP 0.89 ! LA 1.04 MK 1.13 NL 1.00 OV 1.00 ! PT 1.04 SC 0.92 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.064785Jy sigma=1.039077 ! Fit after self-cal, rms=0.064043Jy sigma=1.025723 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064043Jy sigma=1.025723 ! Fit after self-cal, rms=0.064042Jy sigma=1.025678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8626 mas, bmaj=2.094 mas, bpa=2.397 degrees ! Estimated noise=1.02785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789029 Jy ! Component: 100 - total flux cleaned = 0.000970472 Jy ! Component: 150 - total flux cleaned = 0.00100153 Jy ! Component: 200 - total flux cleaned = 0.00100435 Jy ! Total flux subtracted in 200 components = 0.00100435 Jy ! Clean residual min=-0.003742 max=0.004504 Jy/beam ! Clean residual mean=0.000029 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.145938 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.145938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063964Jy sigma=1.024797 ! Fit after self-cal, rms=0.063963Jy sigma=1.024745 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063963Jy sigma=1.024745 ! Fit after self-cal, rms=0.059274Jy sigma=0.949221 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607906 Jy ! Component: 100 - total flux cleaned = 0.000662106 Jy ! Component: 150 - total flux cleaned = 0.000624225 Jy ! Component: 200 - total flux cleaned = 0.000567082 Jy ! Total flux subtracted in 200 components = 0.000567082 Jy ! Clean residual min=-0.003270 max=0.004055 Jy/beam ! Clean residual mean=0.000031 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.146505 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.146505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059256Jy sigma=0.947944 ! Fit after self-cal, rms=0.058815Jy sigma=0.939911 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8626 x 2.094 at 2.397 degrees (North through East) ! Clean map min=-0.0029288 max=0.12859 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058815Jy sigma=0.939911 ! Fit after self-cal, rms=0.057563Jy sigma=0.927883 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057563Jy sigma=0.927883 ! Fit after self-cal, rms=0.057547Jy sigma=0.926856 ! Inverting map and beam ! Estimated beam: bmin=0.8539 mas, bmaj=2.069 mas, bpa=2.277 degrees ! Estimated noise=1.00721 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141085 Jy ! Component: 100 - total flux cleaned = -0.00152873 Jy ! Component: 150 - total flux cleaned = -0.00159062 Jy ! Component: 200 - total flux cleaned = -0.00160808 Jy ! Total flux subtracted in 200 components = -0.00160808 Jy ! Clean residual min=-0.002965 max=0.003110 Jy/beam ! Clean residual mean=0.000017 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.144897 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.144897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057498Jy sigma=0.925982 ! Fit after self-cal, rms=0.057508Jy sigma=0.925776 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057508Jy sigma=0.925776 ! Fit after self-cal, rms=0.058001Jy sigma=0.911867 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058001Jy sigma=0.911867 ! Fit after self-cal, rms=0.058012Jy sigma=0.911774 ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=2.064 mas, bpa=2.004 degrees ! Estimated noise=1.01067 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866362 Jy ! Component: 100 - total flux cleaned = 0.000961982 Jy ! Component: 150 - total flux cleaned = 0.000981157 Jy ! Component: 200 - total flux cleaned = 0.000997487 Jy ! Total flux subtracted in 200 components = 0.000997487 Jy ! Clean residual min=-0.002985 max=0.003279 Jy/beam ! Clean residual mean=0.000012 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.145895 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 0.145895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057981Jy sigma=0.911390 ! Fit after self-cal, rms=0.057983Jy sigma=0.911347 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=4.423 mas, bpa=1.559 degrees ! Estimated noise=1.3101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.71715e-05 Jy ! Component: 100 - total flux cleaned = 5.27869e-05 Jy ! Component: 150 - total flux cleaned = 4.97712e-05 Jy ! Component: 200 - total flux cleaned = 4.71549e-05 Jy ! Total flux subtracted in 200 components = 4.71549e-05 Jy ! Clean residual min=-0.003361 max=0.004107 Jy/beam ! Clean residual mean=0.000022 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.145942 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.145942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057983Jy sigma=0.911493 ! Fit after self-cal, rms=0.057977Jy sigma=0.911274 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6888 mas, bmaj=1.705 mas, bpa=2.953 degrees ! Estimated noise=1.38241 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.106334 Jy ! Component: 100 - total flux cleaned = 0.127106 Jy ! Component: 150 - total flux cleaned = 0.136814 Jy ! Component: 200 - total flux cleaned = 0.141735 Jy ! Total flux subtracted in 200 components = 0.141735 Jy ! Clean residual min=-0.004305 max=0.004041 Jy/beam ! Clean residual mean=0.000017 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.141735 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.141735 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=2.064 mas, bpa=2.004 degrees ! Estimated noise=1.01067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332189 Jy ! Component: 100 - total flux cleaned = 0.00423915 Jy ! Component: 150 - total flux cleaned = 0.00438057 Jy ! Component: 200 - total flux cleaned = 0.00442348 Jy ! Total flux subtracted in 200 components = 0.00442348 Jy ! Clean residual min=-0.002965 max=0.003236 Jy/beam ! Clean residual mean=0.000011 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.146158 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.146158 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=4.423 mas, bpa=1.559 degrees ! Estimated noise=1.3101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.22561e-05 Jy ! Component: 100 - total flux cleaned = 8.5712e-06 Jy ! Component: 150 - total flux cleaned = 8.93831e-06 Jy ! Component: 200 - total flux cleaned = 9.3494e-06 Jy ! Total flux subtracted in 200 components = 9.3494e-06 Jy ! Clean residual min=-0.003351 max=0.004135 Jy/beam ! Clean residual mean=0.000021 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.146168 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.146168 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=2.064 mas, bpa=2.004 degrees ! Estimated noise=1.01067 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144642 Jy ! Component: 100 - total flux cleaned = -9.5728e-05 Jy ! Component: 150 - total flux cleaned = -0.000115688 Jy ! Component: 200 - total flux cleaned = -0.000132027 Jy ! Total flux subtracted in 200 components = -0.000132027 Jy ! Clean residual min=-0.002968 max=0.003242 Jy/beam ! Clean residual mean=0.000011 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.146035 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.146035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057947Jy sigma=0.911049 ! Fit after self-cal, rms=0.057946Jy sigma=0.911005 wmodel J1254-1317_X_2005_07_08_yyk\_map.mod ! Writing 45 model components to file: J1254-1317_X_2005_07_08_yyk_map.mod wobs J1254-1317_X_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1254-1317_X_2005_07_08_yyk_uvs.fits wwins J1254-1317_X_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J1254-1317_X_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118721 Jy ! Component: 100 - total flux cleaned = 0.00140313 Jy ! Component: 150 - total flux cleaned = 0.00160606 Jy ! Component: 200 - total flux cleaned = 0.0017035 Jy ! Component: 250 - total flux cleaned = 0.00161212 Jy ! Component: 300 - total flux cleaned = 0.00147914 Jy ! Component: 350 - total flux cleaned = 0.00139351 Jy ! Component: 400 - total flux cleaned = 0.00130978 Jy ! Component: 450 - total flux cleaned = 0.00102588 Jy ! Component: 500 - total flux cleaned = 0.000908607 Jy ! Component: 550 - total flux cleaned = 0.000754873 Jy ! Component: 600 - total flux cleaned = 0.000717847 Jy ! Component: 650 - total flux cleaned = 0.000645187 Jy ! Component: 700 - total flux cleaned = 0.000396988 Jy ! Component: 750 - total flux cleaned = 0.000224402 Jy ! Component: 800 - total flux cleaned = -4.76241e-05 Jy ! Component: 850 - total flux cleaned = -0.000280071 Jy ! Component: 900 - total flux cleaned = -0.000377849 Jy ! Component: 950 - total flux cleaned = -0.000571091 Jy ! Component: 1000 - total flux cleaned = -0.000791782 Jy ! Component: 1050 - total flux cleaned = -0.000915975 Jy ! Component: 1100 - total flux cleaned = -0.0011599 Jy ! Component: 1150 - total flux cleaned = -0.00127937 Jy ! Component: 1200 - total flux cleaned = -0.00133875 Jy ! Component: 1250 - total flux cleaned = -0.00142572 Jy ! Component: 1300 - total flux cleaned = -0.00148328 Jy ! Component: 1350 - total flux cleaned = -0.00162489 Jy ! Component: 1400 - total flux cleaned = -0.00173686 Jy ! Component: 1450 - total flux cleaned = -0.00184681 Jy ! Component: 1500 - total flux cleaned = -0.00200965 Jy ! Component: 1550 - total flux cleaned = -0.00214356 Jy ! Component: 1600 - total flux cleaned = -0.00227586 Jy ! Component: 1650 - total flux cleaned = -0.00238004 Jy ! Component: 1700 - total flux cleaned = -0.00253479 Jy ! Component: 1750 - total flux cleaned = -0.00271278 Jy ! Component: 1800 - total flux cleaned = -0.00281364 Jy ! Component: 1850 - total flux cleaned = -0.00291269 Jy ! Component: 1900 - total flux cleaned = -0.0030354 Jy ! Component: 1950 - total flux cleaned = -0.00315724 Jy ! Component: 2000 - total flux cleaned = -0.003326 Jy ! Total flux subtracted in 2048 components = -0.0033735 Jy ! Clean residual min=-0.001571 max=0.001427 Jy/beam ! Clean residual mean=0.000004 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.142662 Jy keep ! Adding 156 model components to the UV plane model. ! The established model now contains 201 components and 0.142662 Jy ![Exited script file: muppet] wmap "J1254-1317_X_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8551 x 2.064 at 2.004 degrees (North through East) ! Clean map min=-0.0022876 max=0.12614 Jy/beam ! Writing clean map to FITS file: J1254-1317_X_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.126139 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00045289 device "J1254-1317_X_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1254-1317_X_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07712 1.07712 2.15424 4.30847 8.61695 17.2339 34.4678 68.9356 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.126 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8551 x 2.064 at 2.004 degrees (North through East) ! Clean map min=-0.0022876 max=0.12614 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1254-1317_X_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1254-1317_X_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1254-1317_X_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:28:41 2006