! Started logfile: J1244-2633_S_2005_07_08_yyk_uvs.log on Fri Jan 20 10:27:24 2006 obs J1244-2633_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1244-2633_S_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.915152 visibilities/baseline/integration-bin. ! Found source: J1244-2633 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1244-2633_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.252197 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.491 mas, bmaj=6.542 mas, bpa=-5.803 degrees ! Estimated noise=1.70312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.19842 Jy ! Component: 100 - total flux cleaned = 0.226736 Jy ! Total flux subtracted in 100 components = 0.226736 Jy ! Clean residual min=-0.007935 max=0.008573 Jy/beam ! Clean residual mean=-0.000010 rms=0.002286 Jy/beam ! Combined flux in latest and established models = 0.226736 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.226736 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.094587Jy sigma=1.102081 ! Fit after self-cal, rms=0.094141Jy sigma=1.095222 ! Inverting map and beam ! Estimated beam: bmin=2.491 mas, bmaj=6.542 mas, bpa=-5.803 degrees ! Estimated noise=1.70312 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=8.14 mas, bpa=-4.765 degrees ! Estimated noise=1.15642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112599 Jy ! Component: 100 - total flux cleaned = 0.0152538 Jy ! Component: 150 - total flux cleaned = 0.0163281 Jy ! Component: 200 - total flux cleaned = 0.0165295 Jy ! Total flux subtracted in 200 components = 0.0165295 Jy ! Clean residual min=-0.005812 max=0.006289 Jy/beam ! Clean residual mean=-0.000017 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.243265 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 41 components and 0.243265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093052Jy sigma=1.079550 ! Fit after self-cal, rms=0.093058Jy sigma=1.079507 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.127 x 8.14 at -4.765 degrees (North through East) ! Clean map min=-0.0055296 max=0.23049 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01382 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.11 KP 0.95 ! LA 1.07 MK 0.87 NL 0.95 OV 0.97 ! PT 1.06 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.975861 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.23 KP 0.96 ! LA 1.07 MK 0.96 NL 0.99 OV 1.01 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.966471 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.95 HN 1.16 KP 0.98 ! LA 0.94 MK 1.05 NL 1.04 OV 0.99 ! PT 1.10 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01941 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 1.06 KP 0.91 ! LA 0.78 MK 1.11 NL 0.93 OV 0.89 ! PT 0.97 SC 1.09 ! ! ! Fit before self-cal, rms=0.093058Jy sigma=1.079507 ! Fit after self-cal, rms=0.088237Jy sigma=1.026682 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088237Jy sigma=1.026682 ! Fit after self-cal, rms=0.088239Jy sigma=1.026634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=8.128 mas, bpa=-4.292 degrees ! Estimated noise=1.13608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00302555 Jy ! Component: 100 - total flux cleaned = -0.00325061 Jy ! Component: 150 - total flux cleaned = -0.00343637 Jy ! Component: 200 - total flux cleaned = -0.00347634 Jy ! Total flux subtracted in 200 components = -0.00347634 Jy ! Clean residual min=-0.004008 max=0.003929 Jy/beam ! Clean residual mean=0.000048 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.239789 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.239789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088167Jy sigma=1.024919 ! Fit after self-cal, rms=0.088170Jy sigma=1.024894 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088170Jy sigma=1.024894 ! Fit after self-cal, rms=0.085851Jy sigma=0.986242 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349235 Jy ! Component: 100 - total flux cleaned = 0.000353107 Jy ! Component: 150 - total flux cleaned = 0.00037617 Jy ! Component: 200 - total flux cleaned = 0.000375963 Jy ! Total flux subtracted in 200 components = 0.000375963 Jy ! Clean residual min=-0.003962 max=0.003866 Jy/beam ! Clean residual mean=0.000050 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.240165 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.240165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085845Jy sigma=0.986022 ! Fit after self-cal, rms=0.085875Jy sigma=0.983345 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.144 x 8.128 at -4.292 degrees (North through East) ! Clean map min=-0.003724 max=0.22944 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085875Jy sigma=0.983345 ! Fit after self-cal, rms=0.083520Jy sigma=0.953277 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083520Jy sigma=0.953277 ! Fit after self-cal, rms=0.083609Jy sigma=0.952937 ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=8.123 mas, bpa=-4.241 degrees ! Estimated noise=1.13205 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148128 Jy ! Component: 100 - total flux cleaned = -0.000146649 Jy ! Component: 150 - total flux cleaned = -0.000145981 Jy ! Component: 200 - total flux cleaned = -0.000145295 Jy ! Total flux subtracted in 200 components = -0.000145295 Jy ! Clean residual min=-0.003824 max=0.003341 Jy/beam ! Clean residual mean=0.000036 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.240019 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.240019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083603Jy sigma=0.952845 ! Fit after self-cal, rms=0.083650Jy sigma=0.952794 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083650Jy sigma=0.952794 ! Fit after self-cal, rms=0.082277Jy sigma=0.933275 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082277Jy sigma=0.933275 ! Fit after self-cal, rms=0.082288Jy sigma=0.933246 ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=8.127 mas, bpa=-4.176 degrees ! Estimated noise=1.13241 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219027 Jy ! Component: 100 - total flux cleaned = 0.000220288 Jy ! Component: 150 - total flux cleaned = 0.000219333 Jy ! Component: 200 - total flux cleaned = 0.000207466 Jy ! Total flux subtracted in 200 components = 0.000207466 Jy ! Clean residual min=-0.003715 max=0.003355 Jy/beam ! Clean residual mean=0.000029 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.240227 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.240227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082283Jy sigma=0.933164 ! Fit after self-cal, rms=0.082286Jy sigma=0.933159 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.454 mas, bmaj=20.39 mas, bpa=-0.5076 degrees ! Estimated noise=1.45206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.23056e-05 Jy ! Component: 100 - total flux cleaned = -5.00201e-06 Jy ! Component: 150 - total flux cleaned = 3.31237e-05 Jy ! Component: 200 - total flux cleaned = 6.48613e-05 Jy ! Total flux subtracted in 200 components = 6.48613e-05 Jy ! Clean residual min=-0.003265 max=0.003743 Jy/beam ! Clean residual mean=0.000055 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.240292 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 60 components and 0.240292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082297Jy sigma=0.933303 ! Fit after self-cal, rms=0.082285Jy sigma=0.933230 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=6.504 mas, bpa=-5.518 degrees ! Estimated noise=1.68053 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.196739 Jy ! Component: 100 - total flux cleaned = 0.224666 Jy ! Component: 150 - total flux cleaned = 0.234223 Jy ! Component: 200 - total flux cleaned = 0.238747 Jy ! Total flux subtracted in 200 components = 0.238747 Jy ! Clean residual min=-0.006608 max=0.005719 Jy/beam ! Clean residual mean=0.000024 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.238747 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.238747 Jy ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=8.127 mas, bpa=-4.176 degrees ! Estimated noise=1.13241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144029 Jy ! Component: 100 - total flux cleaned = 0.0013324 Jy ! Component: 150 - total flux cleaned = 0.00136913 Jy ! Component: 200 - total flux cleaned = 0.00139417 Jy ! Total flux subtracted in 200 components = 0.00139417 Jy ! Clean residual min=-0.003591 max=0.003394 Jy/beam ! Clean residual mean=0.000029 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.240141 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.240141 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.454 mas, bmaj=20.39 mas, bpa=-0.5076 degrees ! Estimated noise=1.45206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001155 Jy ! Component: 100 - total flux cleaned = -1.63043e-05 Jy ! Component: 150 - total flux cleaned = 3.52106e-05 Jy ! Component: 200 - total flux cleaned = 7.83716e-05 Jy ! Total flux subtracted in 200 components = 7.83716e-05 Jy ! Clean residual min=-0.003212 max=0.003737 Jy/beam ! Clean residual mean=0.000055 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.24022 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 31 components and 0.24022 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=8.127 mas, bpa=-4.176 degrees ! Estimated noise=1.13241 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182411 Jy ! Component: 100 - total flux cleaned = -0.000182799 Jy ! Component: 150 - total flux cleaned = -0.00018555 Jy ! Component: 200 - total flux cleaned = -0.000184647 Jy ! Total flux subtracted in 200 components = -0.000184647 Jy ! Clean residual min=-0.003650 max=0.003415 Jy/beam ! Clean residual mean=0.000029 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.240035 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.240035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082274Jy sigma=0.933336 ! Fit after self-cal, rms=0.082271Jy sigma=0.933320 wmodel J1244-2633_S_2005_07_08_yyk\_map.mod ! Writing 41 model components to file: J1244-2633_S_2005_07_08_yyk_map.mod wobs J1244-2633_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1244-2633_S_2005_07_08_yyk_uvs.fits wwins J1244-2633_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J1244-2633_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000283844 Jy ! Component: 100 - total flux cleaned = -0.000225244 Jy ! Component: 150 - total flux cleaned = -0.000336969 Jy ! Component: 200 - total flux cleaned = -0.000443955 Jy ! Component: 250 - total flux cleaned = -0.000549824 Jy ! Component: 300 - total flux cleaned = -0.000500022 Jy ! Component: 350 - total flux cleaned = -0.000501254 Jy ! Component: 400 - total flux cleaned = -0.00054964 Jy ! Component: 450 - total flux cleaned = -0.000595454 Jy ! Component: 500 - total flux cleaned = -0.000456359 Jy ! Component: 550 - total flux cleaned = -0.000233716 Jy ! Component: 600 - total flux cleaned = -0.000102388 Jy ! Component: 650 - total flux cleaned = 6.89334e-05 Jy ! Component: 700 - total flux cleaned = 0.000362156 Jy ! Component: 750 - total flux cleaned = 0.000565643 Jy ! Component: 800 - total flux cleaned = 0.000765227 Jy ! Component: 850 - total flux cleaned = 0.000923021 Jy ! Component: 900 - total flux cleaned = 0.00115582 Jy ! Component: 950 - total flux cleaned = 0.00138463 Jy ! Component: 1000 - total flux cleaned = 0.00164691 Jy ! Component: 1050 - total flux cleaned = 0.00179506 Jy ! Component: 1100 - total flux cleaned = 0.00208632 Jy ! Component: 1150 - total flux cleaned = 0.00230224 Jy ! Component: 1200 - total flux cleaned = 0.00262024 Jy ! Component: 1250 - total flux cleaned = 0.00282896 Jy ! Component: 1300 - total flux cleaned = 0.00303504 Jy ! Component: 1350 - total flux cleaned = 0.00320467 Jy ! Component: 1400 - total flux cleaned = 0.00347228 Jy ! Component: 1450 - total flux cleaned = 0.00373603 Jy ! Component: 1500 - total flux cleaned = 0.00393151 Jy ! Component: 1550 - total flux cleaned = 0.00412468 Jy ! Component: 1600 - total flux cleaned = 0.00425227 Jy ! Component: 1650 - total flux cleaned = 0.00450417 Jy ! Component: 1700 - total flux cleaned = 0.0046905 Jy ! Component: 1750 - total flux cleaned = 0.00490532 Jy ! Component: 1800 - total flux cleaned = 0.00505703 Jy ! Component: 1850 - total flux cleaned = 0.00523777 Jy ! Component: 1900 - total flux cleaned = 0.00541684 Jy ! Component: 1950 - total flux cleaned = 0.00553485 Jy ! Component: 2000 - total flux cleaned = 0.0057392 Jy ! Total flux subtracted in 2048 components = 0.00585464 Jy ! Clean residual min=-0.001600 max=0.001579 Jy/beam ! Clean residual mean=0.000039 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.24589 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 172 components and 0.24589 Jy ![Exited script file: muppet] wmap "J1244-2633_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 8.127 at -4.176 degrees (North through East) ! Clean map min=-0.0032314 max=0.23014 Jy/beam ! Writing clean map to FITS file: J1244-2633_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.230138 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000588311 device "J1244-2633_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1244-2633_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.766901 0.766901 1.5338 3.06761 6.13521 12.2704 24.5408 49.0817 98.1634 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.23 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 8.127 at -4.176 degrees (North through East) ! Clean map min=-0.0032314 max=0.23014 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1244-2633_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1244-2633_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1244-2633_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:27:28 2006