! Started logfile: J1155-1017_X_2005_07_20_yyk_uvs.log on Fri Jan 20 10:24:32 2006 obs J1155-1017_X_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J1155-1017_X_2005_07_20_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784444 visibilities/baseline/integration-bin. ! Found source: J1155-1017 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1492 lines of history. ! ! Reading 1412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1155-1017_X_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.131094 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8491 mas, bmaj=3.407 mas, bpa=-20.2 degrees ! Estimated noise=2.01457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0942125 Jy ! Component: 100 - total flux cleaned = 0.120692 Jy ! Total flux subtracted in 100 components = 0.120692 Jy ! Clean residual min=-0.008509 max=0.011316 Jy/beam ! Clean residual mean=0.000022 rms=0.002959 Jy/beam ! Combined flux in latest and established models = 0.120692 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.120692 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.072269Jy sigma=1.100604 ! Fit after self-cal, rms=0.067423Jy sigma=1.080795 ! Inverting map and beam ! Estimated beam: bmin=0.8486 mas, bmaj=3.413 mas, bpa=-20.22 degrees ! Estimated noise=2.01002 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.056 mas, bmaj=3.555 mas, bpa=-19.75 degrees ! Estimated noise=1.33463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150047 Jy ! Component: 100 - total flux cleaned = 0.0193945 Jy ! Component: 150 - total flux cleaned = 0.0192494 Jy ! Component: 200 - total flux cleaned = 0.0190229 Jy ! Total flux subtracted in 200 components = 0.0190229 Jy ! Clean residual min=-0.005905 max=0.007632 Jy/beam ! Clean residual mean=0.000015 rms=0.001782 Jy/beam ! Combined flux in latest and established models = 0.139715 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 29 components and 0.139715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066099Jy sigma=1.025869 ! Fit after self-cal, rms=0.066087Jy sigma=1.025680 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.056 x 3.555 at -19.75 degrees (North through East) ! Clean map min=-0.0056704 max=0.11625 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03657 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 1.00* KP 0.91 ! LA 0.89 MK 0.99 NL 0.94 OV 0.94 ! PT 1.11 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02816 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.97 HN 1.00* KP 0.96 ! LA 0.94 MK 0.86 NL 0.96 OV 0.99 ! PT 1.14 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.066087Jy sigma=1.025680 ! Fit after self-cal, rms=0.065114Jy sigma=1.012459 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065114Jy sigma=1.012459 ! Fit after self-cal, rms=0.065101Jy sigma=1.012405 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=3.492 mas, bpa=-19.95 degrees ! Estimated noise=1.33194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318565 Jy ! Component: 100 - total flux cleaned = 0.00364701 Jy ! Component: 150 - total flux cleaned = 0.00353683 Jy ! Component: 200 - total flux cleaned = 0.00343734 Jy ! Total flux subtracted in 200 components = 0.00343734 Jy ! Clean residual min=-0.005064 max=0.005249 Jy/beam ! Clean residual mean=0.000008 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.143152 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.143152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065010Jy sigma=1.009163 ! Fit after self-cal, rms=0.065004Jy sigma=1.009105 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065004Jy sigma=1.009105 ! Fit after self-cal, rms=0.057139Jy sigma=0.925046 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116787 Jy ! Component: 100 - total flux cleaned = 0.000916117 Jy ! Component: 150 - total flux cleaned = 0.000769661 Jy ! Component: 200 - total flux cleaned = 0.000682177 Jy ! Total flux subtracted in 200 components = 0.000682177 Jy ! Clean residual min=-0.004963 max=0.005108 Jy/beam ! Clean residual mean=0.000006 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.143834 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.143834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057090Jy sigma=0.922490 ! Fit after self-cal, rms=0.055461Jy sigma=0.911690 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.028 x 3.492 at -19.95 degrees (North through East) ! Clean map min=-0.0049444 max=0.11827 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055461Jy sigma=0.911690 ! Fit after self-cal, rms=0.054492Jy sigma=0.904697 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054492Jy sigma=0.904697 ! Fit after self-cal, rms=0.053872Jy sigma=0.901988 ! Inverting map and beam ! Estimated beam: bmin=0.9929 mas, bmaj=3.515 mas, bpa=-19.85 degrees ! Estimated noise=1.2927 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162497 Jy ! Component: 100 - total flux cleaned = -0.00180856 Jy ! Component: 150 - total flux cleaned = -0.00184599 Jy ! Component: 200 - total flux cleaned = -0.00187959 Jy ! Total flux subtracted in 200 components = -0.00187959 Jy ! Clean residual min=-0.004726 max=0.004829 Jy/beam ! Clean residual mean=0.000005 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.141955 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 69 components and 0.141955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053729Jy sigma=0.900379 ! Fit after self-cal, rms=0.053396Jy sigma=0.899369 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053396Jy sigma=0.899369 ! Fit after self-cal, rms=0.053845Jy sigma=0.905153 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053845Jy sigma=0.905153 ! Fit after self-cal, rms=0.053650Jy sigma=0.904543 ! Inverting map and beam ! Estimated beam: bmin=0.9991 mas, bmaj=3.532 mas, bpa=-19.56 degrees ! Estimated noise=1.27923 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197702 Jy ! Component: 100 - total flux cleaned = -0.00249724 Jy ! Component: 150 - total flux cleaned = -0.00263392 Jy ! Component: 200 - total flux cleaned = -0.00269602 Jy ! Total flux subtracted in 200 components = -0.00269602 Jy ! Clean residual min=-0.004843 max=0.005586 Jy/beam ! Clean residual mean=0.000009 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.139259 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.139259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053526Jy sigma=0.903059 ! Fit after self-cal, rms=0.053389Jy sigma=0.902756 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.389 mas, bmaj=4.098 mas, bpa=2.702 degrees ! Estimated noise=1.51123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206911 Jy ! Component: 100 - total flux cleaned = -0.00020636 Jy ! Component: 150 - total flux cleaned = -0.000232453 Jy ! Component: 200 - total flux cleaned = -0.000283077 Jy ! Total flux subtracted in 200 components = -0.000283077 Jy ! Clean residual min=-0.005851 max=0.007247 Jy/beam ! Clean residual mean=0.000015 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.138976 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 85 components and 0.138976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053406Jy sigma=0.902696 ! Fit after self-cal, rms=0.053307Jy sigma=0.902475 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8378 mas, bmaj=3.421 mas, bpa=-20.11 degrees ! Estimated noise=1.9222 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0969529 Jy ! Component: 100 - total flux cleaned = 0.124758 Jy ! Component: 150 - total flux cleaned = 0.135971 Jy ! Component: 200 - total flux cleaned = 0.138087 Jy ! Total flux subtracted in 200 components = 0.138087 Jy ! Clean residual min=-0.005772 max=0.006359 Jy/beam ! Clean residual mean=0.000018 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.138087 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.138087 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9991 mas, bmaj=3.532 mas, bpa=-19.56 degrees ! Estimated noise=1.27923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225423 Jy ! Component: 100 - total flux cleaned = 0.0022622 Jy ! Component: 150 - total flux cleaned = 0.00209949 Jy ! Component: 200 - total flux cleaned = 0.00196097 Jy ! Total flux subtracted in 200 components = 0.00196097 Jy ! Clean residual min=-0.004865 max=0.005716 Jy/beam ! Clean residual mean=0.000011 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.140048 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.140048 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.389 mas, bmaj=4.098 mas, bpa=2.702 degrees ! Estimated noise=1.51123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000797082 Jy ! Component: 100 - total flux cleaned = -0.00112496 Jy ! Component: 150 - total flux cleaned = -0.00128412 Jy ! Component: 200 - total flux cleaned = -0.00138944 Jy ! Total flux subtracted in 200 components = -0.00138944 Jy ! Clean residual min=-0.005949 max=0.007334 Jy/beam ! Clean residual mean=0.000015 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 0.138659 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.138659 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9991 mas, bmaj=3.532 mas, bpa=-19.56 degrees ! Estimated noise=1.27923 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128111 Jy ! Component: 100 - total flux cleaned = -0.000173858 Jy ! Component: 150 - total flux cleaned = -0.000136052 Jy ! Component: 200 - total flux cleaned = -0.000137772 Jy ! Total flux subtracted in 200 components = -0.000137772 Jy ! Clean residual min=-0.004837 max=0.005552 Jy/beam ! Clean residual mean=0.000009 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.138521 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.138521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053363Jy sigma=0.903496 ! Fit after self-cal, rms=0.053296Jy sigma=0.903343 wmodel J1155-1017_X_2005_07_20_yyk\_map.mod ! Writing 40 model components to file: J1155-1017_X_2005_07_20_yyk_map.mod wobs J1155-1017_X_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J1155-1017_X_2005_07_20_yyk_uvs.fits wwins J1155-1017_X_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J1155-1017_X_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144423 Jy ! Component: 100 - total flux cleaned = 0.00222838 Jy ! Component: 150 - total flux cleaned = 0.00293037 Jy ! Component: 200 - total flux cleaned = 0.00325589 Jy ! Component: 250 - total flux cleaned = 0.00325836 Jy ! Component: 300 - total flux cleaned = 0.00308252 Jy ! Component: 350 - total flux cleaned = 0.00285727 Jy ! Component: 400 - total flux cleaned = 0.00258729 Jy ! Component: 450 - total flux cleaned = 0.0022734 Jy ! Component: 500 - total flux cleaned = 0.00191865 Jy ! Component: 550 - total flux cleaned = 0.0016242 Jy ! Component: 600 - total flux cleaned = 0.00119508 Jy ! Component: 650 - total flux cleaned = 0.000962735 Jy ! Component: 700 - total flux cleaned = 0.000644951 Jy ! Component: 750 - total flux cleaned = 0.000292879 Jy ! Component: 800 - total flux cleaned = 7.89571e-05 Jy ! Component: 850 - total flux cleaned = -0.000256419 Jy ! Component: 900 - total flux cleaned = -0.000501735 Jy ! Component: 950 - total flux cleaned = -0.000862802 Jy ! Component: 1000 - total flux cleaned = -0.00105856 Jy ! Component: 1050 - total flux cleaned = -0.00125043 Jy ! Component: 1100 - total flux cleaned = -0.00158916 Jy ! Component: 1150 - total flux cleaned = -0.00162612 Jy ! Component: 1200 - total flux cleaned = -0.00173485 Jy ! Component: 1250 - total flux cleaned = -0.00187716 Jy ! Component: 1300 - total flux cleaned = -0.00194667 Jy ! Component: 1350 - total flux cleaned = -0.0020143 Jy ! Component: 1400 - total flux cleaned = -0.00214834 Jy ! Component: 1450 - total flux cleaned = -0.00218103 Jy ! Component: 1500 - total flux cleaned = -0.00237601 Jy ! Component: 1550 - total flux cleaned = -0.00250411 Jy ! Component: 1600 - total flux cleaned = -0.00272446 Jy ! Component: 1650 - total flux cleaned = -0.00275495 Jy ! Component: 1700 - total flux cleaned = -0.00290707 Jy ! Component: 1750 - total flux cleaned = -0.00299742 Jy ! Component: 1800 - total flux cleaned = -0.00314514 Jy ! Component: 1850 - total flux cleaned = -0.00317408 Jy ! Component: 1900 - total flux cleaned = -0.00331699 Jy ! Component: 1950 - total flux cleaned = -0.00342937 Jy ! Component: 2000 - total flux cleaned = -0.0035962 Jy ! Total flux subtracted in 2048 components = -0.00370596 Jy ! Clean residual min=-0.001984 max=0.001649 Jy/beam ! Clean residual mean=0.000002 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.134815 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 185 components and 0.134815 Jy ![Exited script file: muppet] wmap "J1155-1017_X_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9991 x 3.532 at -19.56 degrees (North through East) ! Clean map min=-0.0034065 max=0.11346 Jy/beam ! Writing clean map to FITS file: J1155-1017_X_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113456 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000548843 device "J1155-1017_X_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J1155-1017_X_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.45124 1.45124 2.90249 5.80498 11.61 23.2199 46.4398 92.8796 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9991 x 3.532 at -19.56 degrees (North through East) ! Clean map min=-0.0034065 max=0.11346 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1155-1017_X_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J1155-1017_X_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1155-1017_X_2005_07_20_yyk_uvs.log closed on Fri Jan 20 10:24:37 2006