! Started logfile: J1148-0046_S_2005_07_08_yyk_uvs.log on Fri Jan 20 10:23:47 2006 obs J1148-0046_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1148-0046_S_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1148-0046 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1411 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1148-0046_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.138672 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=6.657 mas, bpa=-2.89 degrees ! Estimated noise=1.31984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939579 Jy ! Component: 100 - total flux cleaned = 0.11282 Jy ! Total flux subtracted in 100 components = 0.11282 Jy ! Clean residual min=-0.006532 max=0.008199 Jy/beam ! Clean residual mean=0.000007 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 0.11282 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.11282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082007Jy sigma=1.191178 ! Fit after self-cal, rms=0.081752Jy sigma=1.174896 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=7.891 mas, bpa=0.5142 degrees ! Estimated noise=0.942381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967611 Jy ! Component: 100 - total flux cleaned = 0.0131112 Jy ! Component: 150 - total flux cleaned = 0.0146667 Jy ! Component: 200 - total flux cleaned = 0.0153587 Jy ! Total flux subtracted in 200 components = 0.0153587 Jy ! Clean residual min=-0.003819 max=0.004476 Jy/beam ! Clean residual mean=-0.000019 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.128179 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 0.128179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080938Jy sigma=1.158262 ! Fit after self-cal, rms=0.080936Jy sigma=1.157268 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 7.891 at 0.5142 degrees (North through East) ! Clean map min=-0.0036253 max=0.11219 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01152 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.98 KP 1.01 ! LA 1.09 MK 0.95 NL 0.93 OV 1.00 ! PT 1.04 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.080936Jy sigma=1.157268 ! Fit after self-cal, rms=0.080653Jy sigma=1.155022 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080653Jy sigma=1.155022 ! Fit after self-cal, rms=0.080634Jy sigma=1.154297 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=7.795 mas, bpa=0.7574 degrees ! Estimated noise=0.943554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169543 Jy ! Component: 100 - total flux cleaned = 0.00205501 Jy ! Component: 150 - total flux cleaned = 0.0022729 Jy ! Component: 200 - total flux cleaned = 0.00242716 Jy ! Total flux subtracted in 200 components = 0.00242716 Jy ! Clean residual min=-0.003904 max=0.004454 Jy/beam ! Clean residual mean=-0.000010 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.130606 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.130606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080558Jy sigma=1.153648 ! Fit after self-cal, rms=0.080542Jy sigma=1.152988 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080542Jy sigma=1.152988 ! Fit after self-cal, rms=0.075628Jy sigma=1.056223 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243187 Jy ! Component: 100 - total flux cleaned = 0.00268658 Jy ! Component: 150 - total flux cleaned = 0.00268844 Jy ! Component: 200 - total flux cleaned = 0.00267033 Jy ! Total flux subtracted in 200 components = 0.00267033 Jy ! Clean residual min=-0.003895 max=0.004318 Jy/beam ! Clean residual mean=-0.000013 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.133276 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.133276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075583Jy sigma=1.054934 ! Fit after self-cal, rms=0.074656Jy sigma=1.043844 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 7.795 at 0.7574 degrees (North through East) ! Clean map min=-0.0038263 max=0.11505 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074656Jy sigma=1.043844 ! Fit after self-cal, rms=0.074420Jy sigma=1.042598 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074420Jy sigma=1.042598 ! Fit after self-cal, rms=0.074055Jy sigma=1.040244 ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=7.779 mas, bpa=0.7441 degrees ! Estimated noise=0.939301 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.30169e-05 Jy ! Component: 100 - total flux cleaned = -5.3586e-05 Jy ! Component: 150 - total flux cleaned = -6.75226e-05 Jy ! Component: 200 - total flux cleaned = -7.95824e-05 Jy ! Total flux subtracted in 200 components = -7.95824e-05 Jy ! Clean residual min=-0.004111 max=0.004155 Jy/beam ! Clean residual mean=-0.000008 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.133197 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 79 components and 0.133197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074052Jy sigma=1.040140 ! Fit after self-cal, rms=0.073878Jy sigma=1.039379 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073878Jy sigma=1.039379 ! Fit after self-cal, rms=0.072998Jy sigma=1.031134 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072998Jy sigma=1.031134 ! Fit after self-cal, rms=0.072915Jy sigma=1.030811 ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.655 mas, bpa=0.9806 degrees ! Estimated noise=0.93226 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780517 Jy ! Component: 100 - total flux cleaned = 0.00100962 Jy ! Component: 150 - total flux cleaned = 0.00123605 Jy ! Component: 200 - total flux cleaned = 0.00137302 Jy ! Total flux subtracted in 200 components = 0.00137301 Jy ! Clean residual min=-0.004506 max=0.004079 Jy/beam ! Clean residual mean=0.000007 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.13457 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.13457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072850Jy sigma=1.030331 ! Fit after self-cal, rms=0.072823Jy sigma=1.030214 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.826 mas, bmaj=12.26 mas, bpa=1.004 degrees ! Estimated noise=1.18985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.09105e-05 Jy ! Component: 100 - total flux cleaned = 4.24325e-05 Jy ! Component: 150 - total flux cleaned = 4.32614e-05 Jy ! Component: 200 - total flux cleaned = 5.42368e-05 Jy ! Total flux subtracted in 200 components = 5.42368e-05 Jy ! Clean residual min=-0.005097 max=0.005175 Jy/beam ! Clean residual mean=0.000016 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 0.134624 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 86 components and 0.134624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072828Jy sigma=1.030252 ! Fit after self-cal, rms=0.072820Jy sigma=1.030185 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=6.562 mas, bpa=-2.546 degrees ! Estimated noise=1.28797 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0954504 Jy ! Component: 100 - total flux cleaned = 0.115144 Jy ! Component: 150 - total flux cleaned = 0.124749 Jy ! Component: 200 - total flux cleaned = 0.129918 Jy ! Total flux subtracted in 200 components = 0.129918 Jy ! Clean residual min=-0.005128 max=0.005363 Jy/beam ! Clean residual mean=0.000001 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.129919 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.129919 Jy ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.655 mas, bpa=0.9806 degrees ! Estimated noise=0.93226 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306227 Jy ! Component: 100 - total flux cleaned = 0.00390851 Jy ! Component: 150 - total flux cleaned = 0.00418369 Jy ! Component: 200 - total flux cleaned = 0.00439131 Jy ! Total flux subtracted in 200 components = 0.00439131 Jy ! Clean residual min=-0.004445 max=0.004068 Jy/beam ! Clean residual mean=0.000007 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.13431 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.13431 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.826 mas, bmaj=12.26 mas, bpa=1.004 degrees ! Estimated noise=1.18985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181344 Jy ! Component: 100 - total flux cleaned = 0.000179676 Jy ! Component: 150 - total flux cleaned = 0.000208817 Jy ! Component: 200 - total flux cleaned = 0.000221079 Jy ! Total flux subtracted in 200 components = 0.000221079 Jy ! Clean residual min=-0.005087 max=0.005166 Jy/beam ! Clean residual mean=0.000015 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 0.134531 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 69 components and 0.134531 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.655 mas, bpa=0.9806 degrees ! Estimated noise=0.93226 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105734 Jy ! Component: 100 - total flux cleaned = 0.000198123 Jy ! Component: 150 - total flux cleaned = 0.000217149 Jy ! Component: 200 - total flux cleaned = 0.000200362 Jy ! Total flux subtracted in 200 components = 0.000200362 Jy ! Clean residual min=-0.004522 max=0.004032 Jy/beam ! Clean residual mean=0.000007 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.134731 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 74 components and 0.134731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072795Jy sigma=1.030027 ! Fit after self-cal, rms=0.072798Jy sigma=1.029986 wmodel J1148-0046_S_2005_07_08_yyk\_map.mod ! Writing 74 model components to file: J1148-0046_S_2005_07_08_yyk_map.mod wobs J1148-0046_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1148-0046_S_2005_07_08_yyk_uvs.fits wwins J1148-0046_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J1148-0046_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219216 Jy ! Component: 100 - total flux cleaned = 0.000248478 Jy ! Component: 150 - total flux cleaned = 0.000791388 Jy ! Component: 200 - total flux cleaned = 0.00141101 Jy ! Component: 250 - total flux cleaned = 0.00184249 Jy ! Component: 300 - total flux cleaned = 0.00241587 Jy ! Component: 350 - total flux cleaned = 0.00271696 Jy ! Component: 400 - total flux cleaned = 0.00291263 Jy ! Component: 450 - total flux cleaned = 0.00305577 Jy ! Component: 500 - total flux cleaned = 0.0031951 Jy ! Component: 550 - total flux cleaned = 0.00342078 Jy ! Component: 600 - total flux cleaned = 0.00350857 Jy ! Component: 650 - total flux cleaned = 0.00363734 Jy ! Component: 700 - total flux cleaned = 0.0035951 Jy ! Component: 750 - total flux cleaned = 0.0036367 Jy ! Component: 800 - total flux cleaned = 0.00363715 Jy ! Component: 850 - total flux cleaned = 0.00355868 Jy ! Component: 900 - total flux cleaned = 0.00367546 Jy ! Component: 950 - total flux cleaned = 0.00355992 Jy ! Component: 1000 - total flux cleaned = 0.00352243 Jy ! Component: 1050 - total flux cleaned = 0.00348588 Jy ! Component: 1100 - total flux cleaned = 0.00348558 Jy ! Component: 1150 - total flux cleaned = 0.00337837 Jy ! Component: 1200 - total flux cleaned = 0.00330767 Jy ! Component: 1250 - total flux cleaned = 0.0032036 Jy ! Component: 1300 - total flux cleaned = 0.00306772 Jy ! Component: 1350 - total flux cleaned = 0.0031017 Jy ! Component: 1400 - total flux cleaned = 0.0029363 Jy ! Component: 1450 - total flux cleaned = 0.00293624 Jy ! Component: 1500 - total flux cleaned = 0.00290353 Jy ! Component: 1550 - total flux cleaned = 0.00280728 Jy ! Component: 1600 - total flux cleaned = 0.00271296 Jy ! Component: 1650 - total flux cleaned = 0.00265034 Jy ! Component: 1700 - total flux cleaned = 0.0025277 Jy ! Component: 1750 - total flux cleaned = 0.00234712 Jy ! Component: 1800 - total flux cleaned = 0.00228796 Jy ! Component: 1850 - total flux cleaned = 0.00222881 Jy ! Component: 1900 - total flux cleaned = 0.00217075 Jy ! Component: 1950 - total flux cleaned = 0.00211337 Jy ! Component: 2000 - total flux cleaned = 0.00202795 Jy ! Total flux subtracted in 2048 components = 0.00199999 Jy ! Clean residual min=-0.001785 max=0.001444 Jy/beam ! Clean residual mean=-0.000015 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.136731 Jy keep ! Adding 148 model components to the UV plane model. ! The established model now contains 222 components and 0.136731 Jy ![Exited script file: muppet] wmap "J1148-0046_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 7.655 at 0.9806 degrees (North through East) ! Clean map min=-0.0031671 max=0.11381 Jy/beam ! Writing clean map to FITS file: J1148-0046_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113807 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000595305 device "J1148-0046_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1148-0046_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.56925 1.56925 3.13849 6.27698 12.554 25.1079 50.2159 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 7.655 at 0.9806 degrees (North through East) ! Clean map min=-0.0031671 max=0.11381 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1148-0046_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1148-0046_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1148-0046_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:23:51 2006