! Started logfile: J1140-2730_S_2005_07_20_yyk_uvs.log on Fri Jan 20 10:22:33 2006 obs J1140-2730_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J1140-2730_S_2005_07_20_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.80202 visibilities/baseline/integration-bin. ! Found source: J1140-2730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1527 lines of history. ! ! Reading 1588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1140-2730_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.177725 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.407 mas, bmaj=6.019 mas, bpa=-0.2722 degrees ! Estimated noise=1.95081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130536 Jy ! Component: 100 - total flux cleaned = 0.151479 Jy ! Total flux subtracted in 100 components = 0.151479 Jy ! Clean residual min=-0.010109 max=0.012353 Jy/beam ! Clean residual mean=-0.000040 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 0.151479 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.151479 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.093821Jy sigma=1.195039 ! Fit after self-cal, rms=0.093626Jy sigma=1.189153 ! Inverting map and beam ! Estimated beam: bmin=2.407 mas, bmaj=6.019 mas, bpa=-0.2722 degrees ! Estimated noise=1.95081 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.216 mas, bpa=-1.106 degrees ! Estimated noise=1.33443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137693 Jy ! Component: 100 - total flux cleaned = -0.00147242 Jy ! Component: 150 - total flux cleaned = -0.00146732 Jy ! Component: 200 - total flux cleaned = -0.00154434 Jy ! Total flux subtracted in 200 components = -0.00154434 Jy ! Clean residual min=-0.009103 max=0.009611 Jy/beam ! Clean residual mean=-0.000077 rms=0.002593 Jy/beam ! Combined flux in latest and established models = 0.149934 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.149934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093648Jy sigma=1.186545 ! Fit after self-cal, rms=0.093651Jy sigma=1.186467 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.216 at -1.106 degrees (North through East) ! Clean map min=-0.0085411 max=0.14409 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.05423 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.99 HN 1.00* KP 0.95 ! LA 1.01 MK 0.88 NL 0.92 OV 0.93 ! PT 1.03 SC 0.91 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0335 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.97 HN 1.00* KP 0.97 ! LA 1.05 MK 0.84 NL 0.90 OV 1.04 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.093651Jy sigma=1.186467 ! Fit after self-cal, rms=0.092361Jy sigma=1.175821 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092361Jy sigma=1.175821 ! Fit after self-cal, rms=0.092362Jy sigma=1.175773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=7.085 mas, bpa=-2.124 degrees ! Estimated noise=1.32345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124442 Jy ! Component: 100 - total flux cleaned = 0.00159964 Jy ! Component: 150 - total flux cleaned = 0.00166314 Jy ! Component: 200 - total flux cleaned = 0.0016589 Jy ! Total flux subtracted in 200 components = 0.0016589 Jy ! Clean residual min=-0.008701 max=0.010109 Jy/beam ! Clean residual mean=-0.000074 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 0.151593 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.151593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092241Jy sigma=1.173258 ! Fit after self-cal, rms=0.092234Jy sigma=1.173151 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092234Jy sigma=1.173151 ! Fit after self-cal, rms=0.086886Jy sigma=1.114599 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018212 Jy ! Component: 100 - total flux cleaned = 0.00202493 Jy ! Component: 150 - total flux cleaned = 0.00219242 Jy ! Component: 200 - total flux cleaned = 0.00218865 Jy ! Total flux subtracted in 200 components = 0.00218865 Jy ! Clean residual min=-0.009097 max=0.009991 Jy/beam ! Clean residual mean=-0.000069 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 0.153782 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.153782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086702Jy sigma=1.113208 ! Fit after self-cal, rms=0.085943Jy sigma=1.105922 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.886 x 7.085 at -2.124 degrees (North through East) ! Clean map min=-0.0087826 max=0.14345 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085943Jy sigma=1.105922 ! Fit after self-cal, rms=0.081134Jy sigma=1.082977 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081134Jy sigma=1.082977 ! Fit after self-cal, rms=0.081025Jy sigma=1.081509 ! Inverting map and beam ! Estimated beam: bmin=2.855 mas, bmaj=7.004 mas, bpa=-2.422 degrees ! Estimated noise=1.24977 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00579832 Jy ! Component: 100 - total flux cleaned = -0.00586774 Jy ! Component: 150 - total flux cleaned = -0.00577345 Jy ! Component: 200 - total flux cleaned = -0.00573217 Jy ! Total flux subtracted in 200 components = -0.00573217 Jy ! Clean residual min=-0.007338 max=0.007442 Jy/beam ! Clean residual mean=-0.000056 rms=0.002050 Jy/beam ! Combined flux in latest and established models = 0.14805 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.14805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081169Jy sigma=1.075054 ! Fit after self-cal, rms=0.081146Jy sigma=1.074704 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081146Jy sigma=1.074704 ! Fit after self-cal, rms=0.079133Jy sigma=1.073963 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079133Jy sigma=1.073963 ! Fit after self-cal, rms=0.079138Jy sigma=1.073795 ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=7.069 mas, bpa=-2.104 degrees ! Estimated noise=1.21381 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00398755 Jy ! Component: 100 - total flux cleaned = -0.00462092 Jy ! Component: 150 - total flux cleaned = -0.00466639 Jy ! Component: 200 - total flux cleaned = -0.00462748 Jy ! Total flux subtracted in 200 components = -0.00462748 Jy ! Clean residual min=-0.006555 max=0.006526 Jy/beam ! Clean residual mean=-0.000064 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.143422 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.143422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079321Jy sigma=1.070774 ! Fit after self-cal, rms=0.079335Jy sigma=1.070713 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.302 mas, bmaj=18.92 mas, bpa=5.158 degrees ! Estimated noise=1.63462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208192 Jy ! Component: 100 - total flux cleaned = 0.00235633 Jy ! Component: 150 - total flux cleaned = 0.0025277 Jy ! Component: 200 - total flux cleaned = 0.00277036 Jy ! Total flux subtracted in 200 components = 0.00277036 Jy ! Clean residual min=-0.006771 max=0.007685 Jy/beam ! Clean residual mean=-0.000116 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 0.146193 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 3 model components to the UV plane model. ! The established model now contains 38 components and 0.146193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079411Jy sigma=1.071904 ! Fit after self-cal, rms=0.079421Jy sigma=1.071854 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=5.987 mas, bpa=-0.769 degrees ! Estimated noise=1.73566 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.119001 Jy ! Component: 100 - total flux cleaned = 0.139009 Jy ! Component: 150 - total flux cleaned = 0.146906 Jy ! Component: 200 - total flux cleaned = 0.148341 Jy ! Total flux subtracted in 200 components = 0.148341 Jy ! Clean residual min=-0.006129 max=0.005875 Jy/beam ! Clean residual mean=-0.000032 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.148341 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.148341 Jy ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=7.069 mas, bpa=-2.104 degrees ! Estimated noise=1.21381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00481237 Jy ! Component: 100 - total flux cleaned = -0.00514552 Jy ! Component: 150 - total flux cleaned = -0.00508172 Jy ! Component: 200 - total flux cleaned = -0.00502343 Jy ! Total flux subtracted in 200 components = -0.00502343 Jy ! Clean residual min=-0.006613 max=0.006686 Jy/beam ! Clean residual mean=-0.000064 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.143317 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.143317 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.302 mas, bmaj=18.92 mas, bpa=5.158 degrees ! Estimated noise=1.63462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228294 Jy ! Component: 100 - total flux cleaned = 0.00247006 Jy ! Component: 150 - total flux cleaned = 0.00273246 Jy ! Component: 200 - total flux cleaned = 0.00297659 Jy ! Total flux subtracted in 200 components = 0.00297659 Jy ! Clean residual min=-0.006823 max=0.007657 Jy/beam ! Clean residual mean=-0.000116 rms=0.002279 Jy/beam ! Combined flux in latest and established models = 0.146294 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 28 components and 0.146294 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=7.069 mas, bpa=-2.104 degrees ! Estimated noise=1.21381 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020483 Jy ! Component: 100 - total flux cleaned = -0.00212424 Jy ! Component: 150 - total flux cleaned = -0.00212407 Jy ! Component: 200 - total flux cleaned = -0.00212163 Jy ! Total flux subtracted in 200 components = -0.00212163 Jy ! Clean residual min=-0.006495 max=0.006623 Jy/beam ! Clean residual mean=-0.000061 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.144172 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.144172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079321Jy sigma=1.070911 ! Fit after self-cal, rms=0.079332Jy sigma=1.070838 wmodel J1140-2730_S_2005_07_20_yyk\_map.mod ! Writing 33 model components to file: J1140-2730_S_2005_07_20_yyk_map.mod wobs J1140-2730_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J1140-2730_S_2005_07_20_yyk_uvs.fits wwins J1140-2730_S_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J1140-2730_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110236 Jy ! Component: 100 - total flux cleaned = 0.00230549 Jy ! Component: 150 - total flux cleaned = 0.00290451 Jy ! Component: 200 - total flux cleaned = 0.00384355 Jy ! Component: 250 - total flux cleaned = 0.00482167 Jy ! Component: 300 - total flux cleaned = 0.0052463 Jy ! Component: 350 - total flux cleaned = 0.0056503 Jy ! Component: 400 - total flux cleaned = 0.00580379 Jy ! Component: 450 - total flux cleaned = 0.00587603 Jy ! Component: 500 - total flux cleaned = 0.0060898 Jy ! Component: 550 - total flux cleaned = 0.00608891 Jy ! Component: 600 - total flux cleaned = 0.00615841 Jy ! Component: 650 - total flux cleaned = 0.00616088 Jy ! Component: 700 - total flux cleaned = 0.00622461 Jy ! Component: 750 - total flux cleaned = 0.00597947 Jy ! Component: 800 - total flux cleaned = 0.00574286 Jy ! Component: 850 - total flux cleaned = 0.00557111 Jy ! Component: 900 - total flux cleaned = 0.00545997 Jy ! Component: 950 - total flux cleaned = 0.00524026 Jy ! Component: 1000 - total flux cleaned = 0.0051871 Jy ! Component: 1050 - total flux cleaned = 0.00513511 Jy ! Component: 1100 - total flux cleaned = 0.0050835 Jy ! Component: 1150 - total flux cleaned = 0.00503344 Jy ! Component: 1200 - total flux cleaned = 0.00483724 Jy ! Component: 1250 - total flux cleaned = 0.00469237 Jy ! Component: 1300 - total flux cleaned = 0.00469202 Jy ! Component: 1350 - total flux cleaned = 0.00464475 Jy ! Component: 1400 - total flux cleaned = 0.00437012 Jy ! Component: 1450 - total flux cleaned = 0.004326 Jy ! Component: 1500 - total flux cleaned = 0.00428275 Jy ! Component: 1550 - total flux cleaned = 0.00428293 Jy ! Component: 1600 - total flux cleaned = 0.00432606 Jy ! Component: 1650 - total flux cleaned = 0.00424116 Jy ! Component: 1700 - total flux cleaned = 0.00419952 Jy ! Component: 1750 - total flux cleaned = 0.00415822 Jy ! Component: 1800 - total flux cleaned = 0.00407695 Jy ! Component: 1850 - total flux cleaned = 0.00411649 Jy ! Component: 1900 - total flux cleaned = 0.00395947 Jy ! Component: 1950 - total flux cleaned = 0.00396035 Jy ! Component: 2000 - total flux cleaned = 0.00396076 Jy ! Total flux subtracted in 2048 components = 0.00392253 Jy ! Clean residual min=-0.002317 max=0.002336 Jy/beam ! Clean residual mean=-0.000032 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.148095 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 180 components and 0.148095 Jy ![Exited script file: muppet] wmap "J1140-2730_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.864 x 7.069 at -2.104 degrees (North through East) ! Clean map min=-0.0041719 max=0.12918 Jy/beam ! Writing clean map to FITS file: J1140-2730_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.12918 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000761185 device "J1140-2730_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J1140-2730_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.76773 1.76773 3.53546 7.07092 14.1418 28.2837 56.5674 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.864 x 7.069 at -2.104 degrees (North through East) ! Clean map min=-0.0041719 max=0.12918 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1140-2730_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J1140-2730_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1140-2730_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 10:22:37 2006