! Started logfile: J1122-2742_X_2005_07_08_yyk_uvs.log on Fri Jan 20 10:21:13 2006 obs J1122-2742_X_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1122-2742_X_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.779798 visibilities/baseline/integration-bin. ! Found source: J1122-2742 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1407 lines of history. ! ! Reading 1544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1122-2742_X_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.149187 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7618 mas, bmaj=8.829 mas, bpa=20.18 degrees ! Estimated noise=2.60481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0956688 Jy ! Component: 100 - total flux cleaned = 0.125208 Jy ! Total flux subtracted in 100 components = 0.125208 Jy ! Clean residual min=-0.014175 max=0.016181 Jy/beam ! Clean residual mean=-0.000049 rms=0.004059 Jy/beam ! Combined flux in latest and established models = 0.125208 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.125208 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.073666Jy sigma=1.232502 ! Fit after self-cal, rms=0.072149Jy sigma=1.215729 ! Inverting map and beam ! Estimated beam: bmin=0.7625 mas, bmaj=8.829 mas, bpa=20.18 degrees ! Estimated noise=2.60111 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.2 mas, bmaj=9.911 mas, bpa=19.52 degrees ! Estimated noise=1.50162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244382 Jy ! Component: 100 - total flux cleaned = 0.0354694 Jy ! Component: 150 - total flux cleaned = 0.0419667 Jy ! Component: 200 - total flux cleaned = 0.0461236 Jy ! Total flux subtracted in 200 components = 0.0461236 Jy ! Clean residual min=-0.006218 max=0.005780 Jy/beam ! Clean residual mean=0.000039 rms=0.001721 Jy/beam ! Combined flux in latest and established models = 0.171331 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 55 model components to the UV plane model. ! The established model now contains 76 components and 0.171331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067606Jy sigma=1.098568 ! Fit after self-cal, rms=0.067583Jy sigma=1.098102 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.2 x 9.911 at 19.52 degrees (North through East) ! Clean map min=-0.0059979 max=0.11882 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04152 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.88 HN 1.00* KP 0.93 ! LA 1.01 MK 1.00* NL 1.00* OV 1.05 ! PT 0.86 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.067583Jy sigma=1.098102 ! Fit after self-cal, rms=0.066417Jy sigma=1.081095 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066417Jy sigma=1.081095 ! Fit after self-cal, rms=0.066415Jy sigma=1.081080 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.197 mas, bmaj=9.971 mas, bpa=19.59 degrees ! Estimated noise=1.47938 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569103 Jy ! Component: 100 - total flux cleaned = 0.000719889 Jy ! Component: 150 - total flux cleaned = 0.000716784 Jy ! Component: 200 - total flux cleaned = 0.000778541 Jy ! Total flux subtracted in 200 components = 0.000778541 Jy ! Clean residual min=-0.006191 max=0.005108 Jy/beam ! Clean residual mean=0.000062 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.17211 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.17211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066257Jy sigma=1.078731 ! Fit after self-cal, rms=0.066244Jy sigma=1.078644 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066244Jy sigma=1.078644 ! Fit after self-cal, rms=0.058956Jy sigma=0.981511 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144853 Jy ! Component: 100 - total flux cleaned = 0.00168344 Jy ! Component: 150 - total flux cleaned = 0.00168039 Jy ! Component: 200 - total flux cleaned = 0.00173199 Jy ! Total flux subtracted in 200 components = 0.00173199 Jy ! Clean residual min=-0.006062 max=0.005032 Jy/beam ! Clean residual mean=0.000060 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.173842 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 0.173842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058861Jy sigma=0.978834 ! Fit after self-cal, rms=0.058474Jy sigma=0.972871 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.197 x 9.971 at 19.59 degrees (North through East) ! Clean map min=-0.0060848 max=0.11806 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058474Jy sigma=0.972871 ! Fit after self-cal, rms=0.057012Jy sigma=0.962694 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057012Jy sigma=0.962694 ! Fit after self-cal, rms=0.057032Jy sigma=0.962053 ! Inverting map and beam ! Estimated beam: bmin=1.186 mas, bmaj=9.984 mas, bpa=19.51 degrees ! Estimated noise=1.43851 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00288579 Jy ! Component: 100 - total flux cleaned = -0.00348495 Jy ! Component: 150 - total flux cleaned = -0.00352636 Jy ! Component: 200 - total flux cleaned = -0.00344802 Jy ! Total flux subtracted in 200 components = -0.00344802 Jy ! Clean residual min=-0.005595 max=0.004634 Jy/beam ! Clean residual mean=0.000053 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.170394 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 140 components and 0.170394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056809Jy sigma=0.959502 ! Fit after self-cal, rms=0.056842Jy sigma=0.959396 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056842Jy sigma=0.959396 ! Fit after self-cal, rms=0.057542Jy sigma=0.949011 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057542Jy sigma=0.949011 ! Fit after self-cal, rms=0.057566Jy sigma=0.948917 ! Inverting map and beam ! Estimated beam: bmin=1.165 mas, bmaj=9.951 mas, bpa=19.25 degrees ! Estimated noise=1.45289 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269628 Jy ! Component: 100 - total flux cleaned = 0.00430929 Jy ! Component: 150 - total flux cleaned = 0.00532361 Jy ! Component: 200 - total flux cleaned = 0.00551656 Jy ! Total flux subtracted in 200 components = 0.00551656 Jy ! Clean residual min=-0.004979 max=0.004263 Jy/beam ! Clean residual mean=0.000044 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.175911 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 155 components and 0.175911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057501Jy sigma=0.946679 ! Fit after self-cal, rms=0.057514Jy sigma=0.946629 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=10.36 mas, bpa=16.28 degrees ! Estimated noise=1.62176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.75505e-06 Jy ! Component: 100 - total flux cleaned = 0.000136742 Jy ! Component: 150 - total flux cleaned = 0.000225939 Jy ! Component: 200 - total flux cleaned = 0.000280126 Jy ! Total flux subtracted in 200 components = 0.000280126 Jy ! Clean residual min=-0.004659 max=0.004864 Jy/beam ! Clean residual mean=0.000059 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.176191 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 166 components and 0.176191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057499Jy sigma=0.946287 ! Fit after self-cal, rms=0.057506Jy sigma=0.946270 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7556 mas, bmaj=8.84 mas, bpa=20.07 degrees ! Estimated noise=2.5267 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0974115 Jy ! Component: 100 - total flux cleaned = 0.128071 Jy ! Component: 150 - total flux cleaned = 0.142808 Jy ! Component: 200 - total flux cleaned = 0.152216 Jy ! Total flux subtracted in 200 components = 0.152216 Jy ! Clean residual min=-0.010721 max=0.011579 Jy/beam ! Clean residual mean=-0.000001 rms=0.002989 Jy/beam ! Combined flux in latest and established models = 0.152216 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.152216 Jy ! Inverting map and beam ! Estimated beam: bmin=1.165 mas, bmaj=9.951 mas, bpa=19.25 degrees ! Estimated noise=1.45289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102296 Jy ! Component: 100 - total flux cleaned = 0.0158688 Jy ! Component: 150 - total flux cleaned = 0.0190993 Jy ! Component: 200 - total flux cleaned = 0.0208444 Jy ! Total flux subtracted in 200 components = 0.0208444 Jy ! Clean residual min=-0.005234 max=0.004021 Jy/beam ! Clean residual mean=0.000029 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.173061 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 70 components and 0.173061 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=10.36 mas, bpa=16.28 degrees ! Estimated noise=1.62176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107002 Jy ! Component: 100 - total flux cleaned = 0.00155308 Jy ! Component: 150 - total flux cleaned = 0.0017322 Jy ! Component: 200 - total flux cleaned = 0.00189149 Jy ! Total flux subtracted in 200 components = 0.00189149 Jy ! Clean residual min=-0.004925 max=0.004880 Jy/beam ! Clean residual mean=0.000047 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.174952 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.174952 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.165 mas, bmaj=9.951 mas, bpa=19.25 degrees ! Estimated noise=1.45289 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393308 Jy ! Component: 100 - total flux cleaned = -0.000398374 Jy ! Component: 150 - total flux cleaned = -0.000305602 Jy ! Component: 200 - total flux cleaned = -0.000259593 Jy ! Total flux subtracted in 200 components = -0.000259593 Jy ! Clean residual min=-0.005092 max=0.004129 Jy/beam ! Clean residual mean=0.000037 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.174693 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 0.174693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057475Jy sigma=0.946919 ! Fit after self-cal, rms=0.057477Jy sigma=0.946751 wmodel J1122-2742_X_2005_07_08_yyk\_map.mod ! Writing 101 model components to file: J1122-2742_X_2005_07_08_yyk_map.mod wobs J1122-2742_X_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1122-2742_X_2005_07_08_yyk_uvs.fits wwins J1122-2742_X_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J1122-2742_X_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0022342 Jy ! Component: 100 - total flux cleaned = -0.00425791 Jy ! Component: 150 - total flux cleaned = -0.00614458 Jy ! Component: 200 - total flux cleaned = -0.00763396 Jy ! Component: 250 - total flux cleaned = -0.0089044 Jy ! Component: 300 - total flux cleaned = -0.00998296 Jy ! Component: 350 - total flux cleaned = -0.0110056 Jy ! Component: 400 - total flux cleaned = -0.0117503 Jy ! Component: 450 - total flux cleaned = -0.0125168 Jy ! Component: 500 - total flux cleaned = -0.0133097 Jy ! Component: 550 - total flux cleaned = -0.0142305 Jy ! Component: 600 - total flux cleaned = -0.0149731 Jy ! Component: 650 - total flux cleaned = -0.0157409 Jy ! Component: 700 - total flux cleaned = -0.0164841 Jy ! Component: 750 - total flux cleaned = -0.0170701 Jy ! Component: 800 - total flux cleaned = -0.0176413 Jy ! Component: 850 - total flux cleaned = -0.0181134 Jy ! Component: 900 - total flux cleaned = -0.0185329 Jy ! Component: 950 - total flux cleaned = -0.018943 Jy ! Component: 1000 - total flux cleaned = -0.0193045 Jy ! Component: 1050 - total flux cleaned = -0.0196996 Jy ! Component: 1100 - total flux cleaned = -0.020127 Jy ! Component: 1150 - total flux cleaned = -0.0204711 Jy ! Component: 1200 - total flux cleaned = -0.0208847 Jy ! Component: 1250 - total flux cleaned = -0.0211811 Jy ! Component: 1300 - total flux cleaned = -0.0215821 Jy ! Component: 1350 - total flux cleaned = -0.0219049 Jy ! Component: 1400 - total flux cleaned = -0.0221875 Jy ! Component: 1450 - total flux cleaned = -0.0225009 Jy ! Component: 1500 - total flux cleaned = -0.0227417 Jy ! Component: 1550 - total flux cleaned = -0.0230465 Jy ! Component: 1600 - total flux cleaned = -0.0233464 Jy ! Component: 1650 - total flux cleaned = -0.0235767 Jy ! Component: 1700 - total flux cleaned = -0.0238365 Jy ! Component: 1750 - total flux cleaned = -0.0240614 Jy ! Component: 1800 - total flux cleaned = -0.024379 Jy ! Component: 1850 - total flux cleaned = -0.0246616 Jy ! Component: 1900 - total flux cleaned = -0.0249098 Jy ! Component: 1950 - total flux cleaned = -0.025217 Jy ! Component: 2000 - total flux cleaned = -0.0255514 Jy ! Total flux subtracted in 2048 components = -0.0258218 Jy ! Clean residual min=-0.001977 max=0.001582 Jy/beam ! Clean residual mean=0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.148871 Jy keep ! Adding 92 model components to the UV plane model. ! The established model now contains 193 components and 0.148871 Jy ![Exited script file: muppet] wmap "J1122-2742_X_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.165 x 9.951 at 19.25 degrees (North through East) ! Clean map min=-0.0046171 max=0.11141 Jy/beam ! Writing clean map to FITS file: J1122-2742_X_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11141 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000589508 device "J1122-2742_X_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1122-2742_X_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.58741 1.58741 3.17482 6.34963 12.6993 25.3985 50.7971 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.165 x 9.951 at 19.25 degrees (North through East) ! Clean map min=-0.0046171 max=0.11141 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1122-2742_X_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1122-2742_X_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1122-2742_X_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:21:18 2006