! Started logfile: J1031-0423_X_2005_07_09_yyk_uvs.log on Fri Jan 20 10:18:41 2006 obs J1031-0423_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J1031-0423_X_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1031-0423 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1480 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1031-0423_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.16843 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7218 mas, bmaj=1.804 mas, bpa=2.165 degrees ! Estimated noise=1.4726 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.113796 Jy ! Component: 100 - total flux cleaned = 0.146164 Jy ! Total flux subtracted in 100 components = 0.146164 Jy ! Clean residual min=-0.011588 max=0.014719 Jy/beam ! Clean residual mean=-0.000009 rms=0.003559 Jy/beam ! Combined flux in latest and established models = 0.146164 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.146164 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.095663Jy sigma=1.607796 ! Fit after self-cal, rms=0.087444Jy sigma=1.369253 ! Inverting map and beam ! Estimated beam: bmin=0.7218 mas, bmaj=1.804 mas, bpa=2.165 degrees ! Estimated noise=1.4726 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9397 mas, bmaj=2.273 mas, bpa=6.303 degrees ! Estimated noise=1.00901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293545 Jy ! Component: 100 - total flux cleaned = 0.0405381 Jy ! Component: 150 - total flux cleaned = 0.0456194 Jy ! Component: 200 - total flux cleaned = 0.0479103 Jy ! Total flux subtracted in 200 components = 0.0479103 Jy ! Clean residual min=-0.006742 max=0.007222 Jy/beam ! Clean residual mean=-0.000018 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.194074 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.194074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082234Jy sigma=1.235058 ! Fit after self-cal, rms=0.082201Jy sigma=1.234809 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9397 x 2.273 at 6.303 degrees (North through East) ! Clean map min=-0.006248 max=0.13548 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.082201Jy sigma=1.234809 ! Fit after self-cal, rms=0.082201Jy sigma=1.234809 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082201Jy sigma=1.234809 ! Fit after self-cal, rms=0.082201Jy sigma=1.234808 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9397 mas, bmaj=2.273 mas, bpa=6.303 degrees ! Estimated noise=1.00901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489008 Jy ! Component: 100 - total flux cleaned = 0.000595919 Jy ! Component: 150 - total flux cleaned = 0.000735301 Jy ! Component: 200 - total flux cleaned = 0.000735848 Jy ! Total flux subtracted in 200 components = 0.000735848 Jy ! Clean residual min=-0.006766 max=0.007127 Jy/beam ! Clean residual mean=-0.000017 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.19481 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.19481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082121Jy sigma=1.233916 ! Fit after self-cal, rms=0.082113Jy sigma=1.233878 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082113Jy sigma=1.233878 ! Fit after self-cal, rms=0.070657Jy sigma=1.030999 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450365 Jy ! Component: 100 - total flux cleaned = 0.00518716 Jy ! Component: 150 - total flux cleaned = 0.0051447 Jy ! Component: 200 - total flux cleaned = 0.00510638 Jy ! Total flux subtracted in 200 components = 0.00510638 Jy ! Clean residual min=-0.006523 max=0.005465 Jy/beam ! Clean residual mean=-0.000011 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 0.199917 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.199917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070428Jy sigma=1.026661 ! Fit after self-cal, rms=0.069458Jy sigma=1.015253 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9397 x 2.273 at 6.303 degrees (North through East) ! Clean map min=-0.0060138 max=0.14022 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069458Jy sigma=1.015253 ! Fit after self-cal, rms=0.068113Jy sigma=1.004323 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068113Jy sigma=1.004323 ! Fit after self-cal, rms=0.067982Jy sigma=1.003546 ! Inverting map and beam ! Estimated beam: bmin=0.9338 mas, bmaj=2.26 mas, bpa=6.308 degrees ! Estimated noise=0.99175 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198697 Jy ! Component: 100 - total flux cleaned = -0.00208342 Jy ! Component: 150 - total flux cleaned = -0.00204548 Jy ! Component: 200 - total flux cleaned = -0.00200931 Jy ! Total flux subtracted in 200 components = -0.00200931 Jy ! Clean residual min=-0.005302 max=0.004520 Jy/beam ! Clean residual mean=-0.000004 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.197907 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.197907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067898Jy sigma=1.002122 ! Fit after self-cal, rms=0.067871Jy sigma=1.001992 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067871Jy sigma=1.001992 ! Fit after self-cal, rms=0.067609Jy sigma=1.000904 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067609Jy sigma=1.000904 ! Fit after self-cal, rms=0.067598Jy sigma=1.000805 ! Inverting map and beam ! Estimated beam: bmin=0.9271 mas, bmaj=2.256 mas, bpa=6.46 degrees ! Estimated noise=0.991983 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441402 Jy ! Component: 100 - total flux cleaned = 0.000665018 Jy ! Component: 150 - total flux cleaned = 0.000744425 Jy ! Component: 200 - total flux cleaned = 0.000816096 Jy ! Total flux subtracted in 200 components = 0.000816096 Jy ! Clean residual min=-0.004758 max=0.004403 Jy/beam ! Clean residual mean=-0.000000 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.198723 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.198723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067530Jy sigma=0.999997 ! Fit after self-cal, rms=0.067528Jy sigma=0.999947 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.306 mas, bmaj=3.86 mas, bpa=3.384 degrees ! Estimated noise=1.24053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622569 Jy ! Component: 100 - total flux cleaned = 0.000623943 Jy ! Component: 150 - total flux cleaned = 0.000625222 Jy ! Component: 200 - total flux cleaned = 0.000647854 Jy ! Total flux subtracted in 200 components = 0.000647854 Jy ! Clean residual min=-0.004121 max=0.003922 Jy/beam ! Clean residual mean=0.000001 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.199371 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.199371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067502Jy sigma=1.000340 ! Fit after self-cal, rms=0.067473Jy sigma=0.999887 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7175 mas, bmaj=1.799 mas, bpa=2.278 degrees ! Estimated noise=1.44533 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.12549 Jy ! Component: 100 - total flux cleaned = 0.162222 Jy ! Component: 150 - total flux cleaned = 0.179377 Jy ! Component: 200 - total flux cleaned = 0.189564 Jy ! Total flux subtracted in 200 components = 0.189564 Jy ! Clean residual min=-0.007823 max=0.007609 Jy/beam ! Clean residual mean=-0.000002 rms=0.001868 Jy/beam ! Combined flux in latest and established models = 0.189564 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.189564 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9271 mas, bmaj=2.256 mas, bpa=6.46 degrees ! Estimated noise=0.991983 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 0.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737192 Jy ! Component: 100 - total flux cleaned = 0.00845314 Jy ! Component: 150 - total flux cleaned = 0.00877529 Jy ! Component: 200 - total flux cleaned = 0.00869327 Jy ! Total flux subtracted in 200 components = 0.00869327 Jy ! Clean residual min=-0.004595 max=0.004729 Jy/beam ! Clean residual mean=0.000000 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.198257 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 62 components and 0.198257 Jy ! Inverting map ! Added new window around map position (11.2, -15.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235815 Jy ! Component: 100 - total flux cleaned = 0.00212805 Jy ! Component: 150 - total flux cleaned = 0.0019442 Jy ! Component: 200 - total flux cleaned = 0.00177985 Jy ! Total flux subtracted in 200 components = 0.00177985 Jy ! Clean residual min=-0.004643 max=0.003918 Jy/beam ! Clean residual mean=0.000003 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.200037 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.200037 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.306 mas, bmaj=3.86 mas, bpa=3.384 degrees ! Estimated noise=1.24053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178682 Jy ! Component: 100 - total flux cleaned = -0.000285404 Jy ! Component: 150 - total flux cleaned = -0.000333419 Jy ! Component: 200 - total flux cleaned = -0.000382308 Jy ! Total flux subtracted in 200 components = -0.000382308 Jy ! Clean residual min=-0.004183 max=0.004074 Jy/beam ! Clean residual mean=0.000007 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.199655 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.199655 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9271 mas, bmaj=2.256 mas, bpa=6.46 degrees ! Estimated noise=0.991983 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000229337 Jy ! Component: 100 - total flux cleaned = -0.000297163 Jy ! Component: 150 - total flux cleaned = -0.00035771 Jy ! Component: 200 - total flux cleaned = -0.00046764 Jy ! Total flux subtracted in 200 components = -0.00046764 Jy ! Clean residual min=-0.004610 max=0.003842 Jy/beam ! Clean residual mean=0.000003 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.199187 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 0.199187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066801Jy sigma=0.987342 ! Fit after self-cal, rms=0.066705Jy sigma=0.986442 wmodel J1031-0423_X_2005_07_09_yyk\_map.mod ! Writing 115 model components to file: J1031-0423_X_2005_07_09_yyk_map.mod wobs J1031-0423_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J1031-0423_X_2005_07_09_yyk_uvs.fits wwins J1031-0423_X_2005_07_09_yyk\_map.win ! wwins: Wrote 3 windows to J1031-0423_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000766825 Jy ! Component: 100 - total flux cleaned = -0.000906515 Jy ! Component: 150 - total flux cleaned = -0.000522615 Jy ! Component: 200 - total flux cleaned = -0.000278581 Jy ! Component: 250 - total flux cleaned = -0.000336629 Jy ! Component: 300 - total flux cleaned = -0.000612068 Jy ! Component: 350 - total flux cleaned = -0.000822665 Jy ! Component: 400 - total flux cleaned = -0.000924993 Jy ! Component: 450 - total flux cleaned = -0.00127477 Jy ! Component: 500 - total flux cleaned = -0.00151606 Jy ! Component: 550 - total flux cleaned = -0.00156302 Jy ! Component: 600 - total flux cleaned = -0.00170199 Jy ! Component: 650 - total flux cleaned = -0.00183811 Jy ! Component: 700 - total flux cleaned = -0.00205907 Jy ! Component: 750 - total flux cleaned = -0.00218821 Jy ! Component: 800 - total flux cleaned = -0.00244377 Jy ! Component: 850 - total flux cleaned = -0.00257003 Jy ! Component: 900 - total flux cleaned = -0.00298257 Jy ! Component: 950 - total flux cleaned = -0.00326561 Jy ! Component: 1000 - total flux cleaned = -0.0035053 Jy ! Component: 1050 - total flux cleaned = -0.00393783 Jy ! Component: 1100 - total flux cleaned = -0.00428595 Jy ! Component: 1150 - total flux cleaned = -0.00462848 Jy ! Component: 1200 - total flux cleaned = -0.00492925 Jy ! Component: 1250 - total flux cleaned = -0.00526289 Jy ! Component: 1300 - total flux cleaned = -0.00555475 Jy ! Component: 1350 - total flux cleaned = -0.00584243 Jy ! Component: 1400 - total flux cleaned = -0.00601973 Jy ! Component: 1450 - total flux cleaned = -0.00619504 Jy ! Component: 1500 - total flux cleaned = -0.00643806 Jy ! Component: 1550 - total flux cleaned = -0.00660921 Jy ! Component: 1600 - total flux cleaned = -0.00684563 Jy ! Component: 1650 - total flux cleaned = -0.00714547 Jy ! Component: 1700 - total flux cleaned = -0.00727744 Jy ! Component: 1750 - total flux cleaned = -0.00750571 Jy ! Component: 1800 - total flux cleaned = -0.00773154 Jy ! Component: 1850 - total flux cleaned = -0.00789059 Jy ! Component: 1900 - total flux cleaned = -0.00814289 Jy ! Component: 1950 - total flux cleaned = -0.00829854 Jy ! Component: 2000 - total flux cleaned = -0.008514 Jy ! Total flux subtracted in 2048 components = -0.00872787 Jy ! Clean residual min=-0.002195 max=0.001759 Jy/beam ! Clean residual mean=0.000006 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.190459 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 245 components and 0.190459 Jy ![Exited script file: muppet] wmap "J1031-0423_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9271 x 2.256 at 6.46 degrees (North through East) ! Clean map min=-0.0032292 max=0.13614 Jy/beam ! Writing clean map to FITS file: J1031-0423_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136144 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00057415 device "J1031-0423_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J1031-0423_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.26517 1.26517 2.53033 5.06066 10.1213 20.2427 40.4853 80.9706 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9271 x 2.256 at 6.46 degrees (North through East) ! Clean map min=-0.0032292 max=0.13614 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1031-0423_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J1031-0423_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1031-0423_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:18:45 2006