! Started logfile: J1031-0423_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:18:37 2006 obs J1031-0423_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J1031-0423_S_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1031-0423 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1601 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1031-0423_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.223486 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.428 mas, bmaj=6.682 mas, bpa=-1.857 degrees ! Estimated noise=1.30807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.177388 Jy ! Component: 100 - total flux cleaned = 0.208678 Jy ! Total flux subtracted in 100 components = 0.208678 Jy ! Clean residual min=-0.007551 max=0.007906 Jy/beam ! Clean residual mean=-0.000024 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 0.208678 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.208678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072004Jy sigma=1.125535 ! Fit after self-cal, rms=0.071608Jy sigma=1.120396 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=7.748 mas, bpa=-2.223 degrees ! Estimated noise=0.919882 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00888555 Jy ! Component: 100 - total flux cleaned = 0.0124271 Jy ! Component: 150 - total flux cleaned = 0.0136932 Jy ! Component: 200 - total flux cleaned = 0.0138259 Jy ! Total flux subtracted in 200 components = 0.0138259 Jy ! Clean residual min=-0.005000 max=0.006302 Jy/beam ! Clean residual mean=-0.000049 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.222504 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 28 components and 0.222504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070391Jy sigma=1.105048 ! Fit after self-cal, rms=0.070392Jy sigma=1.104927 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 7.748 at -2.223 degrees (North through East) ! Clean map min=-0.0047898 max=0.20445 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02452 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.00 KP 0.96 ! LA 1.09 MK 0.87 NL 0.94 OV 0.95 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.990327 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.03 KP 1.02 ! LA 1.06 MK 0.92 NL 0.98 OV 1.05 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.963202 ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.95 HN 0.98 KP 1.00 ! LA 0.94 MK 1.11 NL 1.04 OV 1.00 ! PT 1.11 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04197 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.94 KP 0.88 ! LA 0.82 MK 1.17 NL 0.96 OV 0.87 ! PT 0.97 SC 1.09 ! ! ! Fit before self-cal, rms=0.070392Jy sigma=1.104927 ! Fit after self-cal, rms=0.066313Jy sigma=1.036244 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066313Jy sigma=1.036244 ! Fit after self-cal, rms=0.066329Jy sigma=1.036171 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=7.862 mas, bpa=-2.18 degrees ! Estimated noise=0.921826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437605 Jy ! Component: 100 - total flux cleaned = 0.00033264 Jy ! Component: 150 - total flux cleaned = 0.000289881 Jy ! Component: 200 - total flux cleaned = 0.000253331 Jy ! Total flux subtracted in 200 components = 0.000253331 Jy ! Clean residual min=-0.004383 max=0.005556 Jy/beam ! Clean residual mean=0.000022 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.222757 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.222757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066228Jy sigma=1.035103 ! Fit after self-cal, rms=0.066232Jy sigma=1.035032 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066232Jy sigma=1.035032 ! Fit after self-cal, rms=0.062577Jy sigma=0.988032 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.5, 27.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663793 Jy ! Component: 100 - total flux cleaned = 0.00927097 Jy ! Component: 150 - total flux cleaned = 0.0104233 Jy ! Component: 200 - total flux cleaned = 0.0111905 Jy ! Total flux subtracted in 200 components = 0.0111905 Jy ! Clean residual min=-0.003743 max=0.003162 Jy/beam ! Clean residual mean=0.000009 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.233947 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 0.233947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062068Jy sigma=0.976079 ! Fit after self-cal, rms=0.061597Jy sigma=0.970583 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.164 x 7.862 at -2.18 degrees (North through East) ! Clean map min=-0.0036265 max=0.20687 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061597Jy sigma=0.970583 ! Fit after self-cal, rms=0.058682Jy sigma=0.935489 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058682Jy sigma=0.935489 ! Fit after self-cal, rms=0.058671Jy sigma=0.934678 ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=7.846 mas, bpa=-2.28 degrees ! Estimated noise=0.915744 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256988 Jy ! Component: 100 - total flux cleaned = 0.0031242 Jy ! Component: 150 - total flux cleaned = 0.00323306 Jy ! Component: 200 - total flux cleaned = 0.00337451 Jy ! Total flux subtracted in 200 components = 0.00337451 Jy ! Clean residual min=-0.003280 max=0.002764 Jy/beam ! Clean residual mean=-0.000004 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.237322 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.237322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058571Jy sigma=0.932276 ! Fit after self-cal, rms=0.058582Jy sigma=0.931921 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058582Jy sigma=0.931921 ! Fit after self-cal, rms=0.056963Jy sigma=0.903315 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056963Jy sigma=0.903315 ! Fit after self-cal, rms=0.056966Jy sigma=0.903220 ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=7.844 mas, bpa=-2.219 degrees ! Estimated noise=0.917704 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126458 Jy ! Component: 100 - total flux cleaned = 0.00148517 Jy ! Component: 150 - total flux cleaned = 0.00156404 Jy ! Component: 200 - total flux cleaned = 0.00167171 Jy ! Total flux subtracted in 200 components = 0.00167171 Jy ! Clean residual min=-0.003290 max=0.002764 Jy/beam ! Clean residual mean=-0.000006 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.238994 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 0.238994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056922Jy sigma=0.902263 ! Fit after self-cal, rms=0.056926Jy sigma=0.902205 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.811 mas, bmaj=13.3 mas, bpa=2.757 degrees ! Estimated noise=1.17353 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734498 Jy ! Component: 100 - total flux cleaned = 0.00073378 Jy ! Component: 150 - total flux cleaned = 0.000778844 Jy ! Component: 200 - total flux cleaned = 0.000798902 Jy ! Total flux subtracted in 200 components = 0.000798902 Jy ! Clean residual min=-0.003745 max=0.002703 Jy/beam ! Clean residual mean=-0.000016 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.239793 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 0.239792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056916Jy sigma=0.902195 ! Fit after self-cal, rms=0.056921Jy sigma=0.902120 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.441 mas, bmaj=6.711 mas, bpa=-1.832 degrees ! Estimated noise=1.29698 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.17677 Jy ! Component: 100 - total flux cleaned = 0.207243 Jy ! Component: 150 - total flux cleaned = 0.217344 Jy ! Component: 200 - total flux cleaned = 0.223056 Jy ! Total flux subtracted in 200 components = 0.223056 Jy ! Clean residual min=-0.005986 max=0.004573 Jy/beam ! Clean residual mean=-0.000001 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.223056 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.223056 Jy ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=7.844 mas, bpa=-2.219 degrees ! Estimated noise=0.917704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, 16.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606991 Jy ! Component: 100 - total flux cleaned = 0.00987649 Jy ! Component: 150 - total flux cleaned = 0.011419 Jy ! Component: 200 - total flux cleaned = 0.0126146 Jy ! Total flux subtracted in 200 components = 0.0126146 Jy ! Clean residual min=-0.003353 max=0.002772 Jy/beam ! Clean residual mean=-0.000003 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.235671 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 63 components and 0.235671 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.811 mas, bmaj=13.3 mas, bpa=2.757 degrees ! Estimated noise=1.17353 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261428 Jy ! Component: 100 - total flux cleaned = 0.00352889 Jy ! Component: 150 - total flux cleaned = 0.00408032 Jy ! Component: 200 - total flux cleaned = 0.00452308 Jy ! Total flux subtracted in 200 components = 0.00452308 Jy ! Clean residual min=-0.003566 max=0.002546 Jy/beam ! Clean residual mean=-0.000023 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.240194 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 93 components and 0.240194 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=7.844 mas, bpa=-2.219 degrees ! Estimated noise=0.917704 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297796 Jy ! Component: 100 - total flux cleaned = -0.000301792 Jy ! Component: 150 - total flux cleaned = -0.00024943 Jy ! Component: 200 - total flux cleaned = -0.000250477 Jy ! Total flux subtracted in 200 components = -0.000250477 Jy ! Clean residual min=-0.003100 max=0.002754 Jy/beam ! Clean residual mean=-0.000011 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.239943 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.239943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056926Jy sigma=0.902144 ! Fit after self-cal, rms=0.056911Jy sigma=0.901994 wmodel J1031-0423_S_2005_07_09_yyk\_map.mod ! Writing 107 model components to file: J1031-0423_S_2005_07_09_yyk_map.mod wobs J1031-0423_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J1031-0423_S_2005_07_09_yyk_uvs.fits wwins J1031-0423_S_2005_07_09_yyk\_map.win ! wwins: Wrote 3 windows to J1031-0423_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100929 Jy ! Component: 100 - total flux cleaned = -0.00149903 Jy ! Component: 150 - total flux cleaned = -0.00172304 Jy ! Component: 200 - total flux cleaned = -0.00185206 Jy ! Component: 250 - total flux cleaned = -0.00185214 Jy ! Component: 300 - total flux cleaned = -0.00193204 Jy ! Component: 350 - total flux cleaned = -0.00204816 Jy ! Component: 400 - total flux cleaned = -0.00216057 Jy ! Component: 450 - total flux cleaned = -0.00237905 Jy ! Component: 500 - total flux cleaned = -0.00266289 Jy ! Component: 550 - total flux cleaned = -0.00287093 Jy ! Component: 600 - total flux cleaned = -0.00293942 Jy ! Component: 650 - total flux cleaned = -0.00307295 Jy ! Component: 700 - total flux cleaned = -0.00304069 Jy ! Component: 750 - total flux cleaned = -0.00310535 Jy ! Component: 800 - total flux cleaned = -0.00316792 Jy ! Component: 850 - total flux cleaned = -0.00313765 Jy ! Component: 900 - total flux cleaned = -0.00313852 Jy ! Component: 950 - total flux cleaned = -0.00310953 Jy ! Component: 1000 - total flux cleaned = -0.00313864 Jy ! Component: 1050 - total flux cleaned = -0.00296589 Jy ! Component: 1100 - total flux cleaned = -0.00296633 Jy ! Component: 1150 - total flux cleaned = -0.00285464 Jy ! Component: 1200 - total flux cleaned = -0.00282657 Jy ! Component: 1250 - total flux cleaned = -0.00271851 Jy ! Component: 1300 - total flux cleaned = -0.00258542 Jy ! Component: 1350 - total flux cleaned = -0.00248014 Jy ! Component: 1400 - total flux cleaned = -0.00240186 Jy ! Component: 1450 - total flux cleaned = -0.00219674 Jy ! Component: 1500 - total flux cleaned = -0.00207038 Jy ! Component: 1550 - total flux cleaned = -0.00189596 Jy ! Component: 1600 - total flux cleaned = -0.00187123 Jy ! Component: 1650 - total flux cleaned = -0.00167608 Jy ! Component: 1700 - total flux cleaned = -0.00155571 Jy ! Component: 1750 - total flux cleaned = -0.00136617 Jy ! Component: 1800 - total flux cleaned = -0.00124917 Jy ! Component: 1850 - total flux cleaned = -0.00115642 Jy ! Component: 1900 - total flux cleaned = -0.00101853 Jy ! Component: 1950 - total flux cleaned = -0.000882538 Jy ! Component: 2000 - total flux cleaned = -0.000815315 Jy ! Total flux subtracted in 2048 components = -0.000659811 Jy ! Clean residual min=-0.001418 max=0.001526 Jy/beam ! Clean residual mean=0.000011 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.239284 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 237 components and 0.239284 Jy ![Exited script file: muppet] wmap "J1031-0423_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.167 x 7.844 at -2.219 degrees (North through East) ! Clean map min=-0.0024666 max=0.20698 Jy/beam ! Writing clean map to FITS file: J1031-0423_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.206982 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00044862 device "J1031-0423_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J1031-0423_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.650229 0.650229 1.30046 2.60091 5.20183 10.4037 20.8073 41.6146 83.2293 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.206 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.167 x 7.844 at -2.219 degrees (North through East) ! Clean map min=-0.0024666 max=0.20698 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1031-0423_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J1031-0423_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1031-0423_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:18:41 2006