! Started logfile: J1025-0509_S_2005_07_08_yyk_uvs.log on Fri Jan 20 10:18:11 2006 obs J1025-0509_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J1025-0509_S_2005_07_08_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.859259 visibilities/baseline/integration-bin. ! Found source: J1025-0509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1856 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1025-0509_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.111069 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=6.74 mas, bpa=-3.773 degrees ! Estimated noise=1.54625 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0625851 Jy ! Component: 100 - total flux cleaned = 0.0784468 Jy ! Total flux subtracted in 100 components = 0.0784468 Jy ! Clean residual min=-0.008612 max=0.010594 Jy/beam ! Clean residual mean=0.000032 rms=0.002599 Jy/beam ! Combined flux in latest and established models = 0.0784468 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0784468 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.078266Jy sigma=1.212571 ! Fit after self-cal, rms=0.076233Jy sigma=1.170168 ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=6.74 mas, bpa=-3.773 degrees ! Estimated noise=1.54625 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.192 mas, bpa=-5.129 degrees ! Estimated noise=1.06083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132404 Jy ! Component: 100 - total flux cleaned = 0.0182247 Jy ! Component: 150 - total flux cleaned = 0.0206783 Jy ! Component: 200 - total flux cleaned = 0.0214591 Jy ! Total flux subtracted in 200 components = 0.0214591 Jy ! Clean residual min=-0.006022 max=0.007161 Jy/beam ! Clean residual mean=-0.000060 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 0.0999059 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.0999059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074993Jy sigma=1.139618 ! Fit after self-cal, rms=0.074969Jy sigma=1.139165 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.192 at -5.129 degrees (North through East) ! Clean map min=-0.0058004 max=0.077785 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.074969Jy sigma=1.139165 ! Fit after self-cal, rms=0.074969Jy sigma=1.139165 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074969Jy sigma=1.139165 ! Fit after self-cal, rms=0.074943Jy sigma=1.138709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.192 mas, bpa=-5.129 degrees ! Estimated noise=1.06083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210726 Jy ! Component: 100 - total flux cleaned = 0.000293962 Jy ! Component: 150 - total flux cleaned = 0.00033193 Jy ! Component: 200 - total flux cleaned = 0.000371945 Jy ! Total flux subtracted in 200 components = 0.000371945 Jy ! Clean residual min=-0.006044 max=0.007064 Jy/beam ! Clean residual mean=-0.000061 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.100278 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.100278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074925Jy sigma=1.138119 ! Fit after self-cal, rms=0.074900Jy sigma=1.137687 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074900Jy sigma=1.137687 ! Fit after self-cal, rms=0.068541Jy sigma=1.041789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358582 Jy ! Component: 100 - total flux cleaned = 0.00404022 Jy ! Component: 150 - total flux cleaned = 0.00414556 Jy ! Component: 200 - total flux cleaned = 0.00419412 Jy ! Total flux subtracted in 200 components = 0.00419412 Jy ! Clean residual min=-0.005466 max=0.006545 Jy/beam ! Clean residual mean=-0.000080 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 0.104472 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.104472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068379Jy sigma=1.038840 ! Fit after self-cal, rms=0.067406Jy sigma=1.028239 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.192 at -5.129 degrees (North through East) ! Clean map min=-0.0052948 max=0.081462 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.902 mas, bmaj=13.8 mas, bpa=-3.006 degrees ! Estimated noise=1.30598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213049 Jy ! Component: 100 - total flux cleaned = 0.00244303 Jy ! Component: 150 - total flux cleaned = 0.0026866 Jy ! Component: 200 - total flux cleaned = 0.00278748 Jy ! Total flux subtracted in 200 components = 0.00278748 Jy ! Clean residual min=-0.006239 max=0.006605 Jy/beam ! Clean residual mean=-0.000159 rms=0.002130 Jy/beam ! Combined flux in latest and established models = 0.107259 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.107259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067549Jy sigma=1.029312 ! Fit after self-cal, rms=0.067288Jy sigma=1.027257 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=6.74 mas, bpa=-3.773 degrees ! Estimated noise=1.54625 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0703051 Jy ! Component: 100 - total flux cleaned = 0.0876881 Jy ! Component: 150 - total flux cleaned = 0.0961071 Jy ! Component: 200 - total flux cleaned = 0.100712 Jy ! Total flux subtracted in 200 components = 0.100712 Jy ! Clean residual min=-0.007712 max=0.007885 Jy/beam ! Clean residual mean=-0.000001 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.100712 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.100712 Jy ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.192 mas, bpa=-5.129 degrees ! Estimated noise=1.06083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554184 Jy ! Component: 100 - total flux cleaned = 0.00476443 Jy ! Component: 150 - total flux cleaned = 0.00441371 Jy ! Component: 200 - total flux cleaned = 0.00411284 Jy ! Total flux subtracted in 200 components = 0.00411284 Jy ! Clean residual min=-0.005249 max=0.005307 Jy/beam ! Clean residual mean=-0.000084 rms=0.001531 Jy/beam ! Combined flux in latest and established models = 0.104824 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.104824 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.902 mas, bmaj=13.8 mas, bpa=-3.006 degrees ! Estimated noise=1.30598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125206 Jy ! Component: 100 - total flux cleaned = -0.00157178 Jy ! Component: 150 - total flux cleaned = -0.00167611 Jy ! Component: 200 - total flux cleaned = -0.00177259 Jy ! Total flux subtracted in 200 components = -0.00177259 Jy ! Clean residual min=-0.005929 max=0.006300 Jy/beam ! Clean residual mean=-0.000143 rms=0.001956 Jy/beam ! Combined flux in latest and established models = 0.103052 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.103052 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.192 mas, bpa=-5.129 degrees ! Estimated noise=1.06083 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292316 Jy ! Component: 100 - total flux cleaned = 0.000217431 Jy ! Component: 150 - total flux cleaned = 0.000282068 Jy ! Component: 200 - total flux cleaned = 0.00021881 Jy ! Total flux subtracted in 200 components = 0.00021881 Jy ! Clean residual min=-0.005162 max=0.005072 Jy/beam ! Clean residual mean=-0.000081 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.103271 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.103271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066506Jy sigma=1.013069 ! Fit after self-cal, rms=0.066364Jy sigma=1.011354 wmodel J1025-0509_S_2005_07_08_yyk\_map.mod ! Writing 90 model components to file: J1025-0509_S_2005_07_08_yyk_map.mod wobs J1025-0509_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J1025-0509_S_2005_07_08_yyk_uvs.fits wwins J1025-0509_S_2005_07_08_yyk\_map.win ! wwins: Wrote 2 windows to J1025-0509_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178691 Jy ! Component: 100 - total flux cleaned = 0.000443875 Jy ! Component: 150 - total flux cleaned = 0.000522985 Jy ! Component: 200 - total flux cleaned = 0.00090018 Jy ! Component: 250 - total flux cleaned = 0.00126228 Jy ! Component: 300 - total flux cleaned = 0.00167703 Jy ! Component: 350 - total flux cleaned = 0.00180937 Jy ! Component: 400 - total flux cleaned = 0.00193808 Jy ! Component: 450 - total flux cleaned = 0.00218596 Jy ! Component: 500 - total flux cleaned = 0.00236578 Jy ! Component: 550 - total flux cleaned = 0.00248276 Jy ! Component: 600 - total flux cleaned = 0.00253947 Jy ! Component: 650 - total flux cleaned = 0.0024293 Jy ! Component: 700 - total flux cleaned = 0.00259231 Jy ! Component: 750 - total flux cleaned = 0.00269693 Jy ! Component: 800 - total flux cleaned = 0.00264534 Jy ! Component: 850 - total flux cleaned = 0.00244364 Jy ! Component: 900 - total flux cleaned = 0.00209793 Jy ! Component: 950 - total flux cleaned = 0.00200127 Jy ! Component: 1000 - total flux cleaned = 0.00162023 Jy ! Component: 1050 - total flux cleaned = 0.00143508 Jy ! Component: 1100 - total flux cleaned = 0.00138894 Jy ! Component: 1150 - total flux cleaned = 0.00111786 Jy ! Component: 1200 - total flux cleaned = 0.000983918 Jy ! Component: 1250 - total flux cleaned = 0.000634426 Jy ! Component: 1300 - total flux cleaned = 0.00054894 Jy ! Component: 1350 - total flux cleaned = 0.000294645 Jy ! Component: 1400 - total flux cleaned = 8.70943e-05 Jy ! Component: 1450 - total flux cleaned = -7.64201e-05 Jy ! Component: 1500 - total flux cleaned = -0.000358419 Jy ! Component: 1550 - total flux cleaned = -0.000516418 Jy ! Component: 1600 - total flux cleaned = -0.000712846 Jy ! Component: 1650 - total flux cleaned = -0.00102186 Jy ! Component: 1700 - total flux cleaned = -0.00121199 Jy ! Component: 1750 - total flux cleaned = -0.00136261 Jy ! Component: 1800 - total flux cleaned = -0.00158585 Jy ! Component: 1850 - total flux cleaned = -0.00165978 Jy ! Component: 1900 - total flux cleaned = -0.00195047 Jy ! Component: 1950 - total flux cleaned = -0.00212975 Jy ! Component: 2000 - total flux cleaned = -0.00223659 Jy ! Total flux subtracted in 2048 components = -0.00258646 Jy ! Clean residual min=-0.002156 max=0.002241 Jy/beam ! Clean residual mean=-0.000045 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.100684 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 217 components and 0.100684 Jy ![Exited script file: muppet] wmap "J1025-0509_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.192 at -5.129 degrees (North through East) ! Clean map min=-0.0040269 max=0.08079 Jy/beam ! Writing clean map to FITS file: J1025-0509_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0807899 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000715161 device "J1025-0509_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1025-0509_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.65563 2.65563 5.31127 10.6225 21.2451 42.4901 84.9802 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.192 at -5.129 degrees (North through East) ! Clean map min=-0.0040269 max=0.08079 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1025-0509_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1025-0509_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1025-0509_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:18:14 2006