! Started logfile: J1022-0958_S_2005_07_20_yyk_uvs.log on Fri Jan 20 10:18:02 2006 obs J1022-0958_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J1022-0958_S_2005_07_20_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.951515 visibilities/baseline/integration-bin. ! Found source: J1022-0958 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1526 lines of history. ! ! Reading 1884 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1022-0958_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.170521 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.622 mas, bmaj=6.479 mas, bpa=-3.402 degrees ! Estimated noise=1.41091 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.122193 Jy ! Component: 100 - total flux cleaned = 0.148303 Jy ! Total flux subtracted in 100 components = 0.148303 Jy ! Clean residual min=-0.007692 max=0.008167 Jy/beam ! Clean residual mean=-0.000002 rms=0.002239 Jy/beam ! Combined flux in latest and established models = 0.148303 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.148303 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.084176Jy sigma=1.311936 ! Fit after self-cal, rms=0.083690Jy sigma=1.281722 ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=6.479 mas, bpa=-3.402 degrees ! Estimated noise=1.41065 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=7.746 mas, bpa=-4.265 degrees ! Estimated noise=1.01491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149278 Jy ! Component: 100 - total flux cleaned = 0.0204059 Jy ! Component: 150 - total flux cleaned = 0.0227139 Jy ! Component: 200 - total flux cleaned = 0.023391 Jy ! Total flux subtracted in 200 components = 0.023391 Jy ! Clean residual min=-0.008900 max=0.008571 Jy/beam ! Clean residual mean=0.000023 rms=0.002423 Jy/beam ! Combined flux in latest and established models = 0.171694 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.171694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082317Jy sigma=1.249687 ! Fit after self-cal, rms=0.082197Jy sigma=1.248770 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 7.746 at -4.265 degrees (North through East) ! Clean map min=-0.0087559 max=0.14187 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.082197Jy sigma=1.248770 ! Fit after self-cal, rms=0.082197Jy sigma=1.248770 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082197Jy sigma=1.248770 ! Fit after self-cal, rms=0.082173Jy sigma=1.248083 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=7.746 mas, bpa=-4.265 degrees ! Estimated noise=1.01491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695683 Jy ! Component: 100 - total flux cleaned = 0.000699872 Jy ! Component: 150 - total flux cleaned = 0.000661395 Jy ! Component: 200 - total flux cleaned = 0.000626051 Jy ! Total flux subtracted in 200 components = 0.000626051 Jy ! Clean residual min=-0.008918 max=0.008615 Jy/beam ! Clean residual mean=0.000022 rms=0.002407 Jy/beam ! Combined flux in latest and established models = 0.17232 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.17232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082212Jy sigma=1.247350 ! Fit after self-cal, rms=0.082139Jy sigma=1.246730 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082139Jy sigma=1.246730 ! Fit after self-cal, rms=0.076277Jy sigma=1.150974 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012016 Jy ! Component: 100 - total flux cleaned = 0.00105421 Jy ! Component: 150 - total flux cleaned = 0.000938303 Jy ! Component: 200 - total flux cleaned = 0.000844685 Jy ! Total flux subtracted in 200 components = 0.000844685 Jy ! Clean residual min=-0.008220 max=0.009061 Jy/beam ! Clean residual mean=0.000021 rms=0.002344 Jy/beam ! Combined flux in latest and established models = 0.173165 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.173165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076249Jy sigma=1.149208 ! Fit after self-cal, rms=0.075487Jy sigma=1.136308 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 7.746 at -4.265 degrees (North through East) ! Clean map min=-0.0076819 max=0.1448 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075487Jy sigma=1.136308 ! Fit after self-cal, rms=0.075376Jy sigma=1.138567 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075376Jy sigma=1.138567 ! Fit after self-cal, rms=0.075215Jy sigma=1.136389 ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.707 mas, bpa=-4.282 degrees ! Estimated noise=1.01729 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143686 Jy ! Component: 100 - total flux cleaned = 0.00156988 Jy ! Component: 150 - total flux cleaned = 0.00160769 Jy ! Component: 200 - total flux cleaned = 0.0016102 Jy ! Total flux subtracted in 200 components = 0.0016102 Jy ! Clean residual min=-0.007896 max=0.008715 Jy/beam ! Clean residual mean=0.000016 rms=0.002275 Jy/beam ! Combined flux in latest and established models = 0.174775 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.174775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075183Jy sigma=1.135670 ! Fit after self-cal, rms=0.075120Jy sigma=1.135150 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075120Jy sigma=1.135150 ! Fit after self-cal, rms=0.074558Jy sigma=1.126248 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074558Jy sigma=1.126248 ! Fit after self-cal, rms=0.074521Jy sigma=1.126006 ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=7.613 mas, bpa=-4.273 degrees ! Estimated noise=1.01543 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171614 Jy ! Component: 100 - total flux cleaned = 0.00193816 Jy ! Component: 150 - total flux cleaned = 0.00209079 Jy ! Component: 200 - total flux cleaned = 0.0021445 Jy ! Total flux subtracted in 200 components = 0.0021445 Jy ! Clean residual min=-0.007357 max=0.008092 Jy/beam ! Clean residual mean=0.000007 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.176919 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 65 components and 0.176919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074454Jy sigma=1.125379 ! Fit after self-cal, rms=0.074426Jy sigma=1.125269 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.763 mas, bmaj=13.72 mas, bpa=-3.494 degrees ! Estimated noise=1.32132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255057 Jy ! Component: 100 - total flux cleaned = 0.00281767 Jy ! Component: 150 - total flux cleaned = 0.00305373 Jy ! Component: 200 - total flux cleaned = 0.00326559 Jy ! Total flux subtracted in 200 components = 0.00326559 Jy ! Clean residual min=-0.008770 max=0.008492 Jy/beam ! Clean residual mean=-0.000025 rms=0.003122 Jy/beam ! Combined flux in latest and established models = 0.180185 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 67 components and 0.180185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074711Jy sigma=1.127036 ! Fit after self-cal, rms=0.074646Jy sigma=1.126604 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=6.439 mas, bpa=-3.451 degrees ! Estimated noise=1.40363 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125677 Jy ! Component: 100 - total flux cleaned = 0.152894 Jy ! Component: 150 - total flux cleaned = 0.164451 Jy ! Component: 200 - total flux cleaned = 0.170066 Jy ! Total flux subtracted in 200 components = 0.170066 Jy ! Clean residual min=-0.006573 max=0.006777 Jy/beam ! Clean residual mean=0.000001 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.170066 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.170066 Jy ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=7.613 mas, bpa=-4.273 degrees ! Estimated noise=1.01543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00623254 Jy ! Component: 100 - total flux cleaned = 0.00663294 Jy ! Component: 150 - total flux cleaned = 0.00664 Jy ! Component: 200 - total flux cleaned = 0.00664057 Jy ! Total flux subtracted in 200 components = 0.00664057 Jy ! Clean residual min=-0.007287 max=0.008182 Jy/beam ! Clean residual mean=0.000008 rms=0.002230 Jy/beam ! Combined flux in latest and established models = 0.176706 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.176706 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.763 mas, bmaj=13.72 mas, bpa=-3.494 degrees ! Estimated noise=1.32132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258194 Jy ! Component: 100 - total flux cleaned = 0.00287249 Jy ! Component: 150 - total flux cleaned = 0.00312767 Jy ! Component: 200 - total flux cleaned = 0.00335818 Jy ! Total flux subtracted in 200 components = 0.00335818 Jy ! Clean residual min=-0.008856 max=0.008648 Jy/beam ! Clean residual mean=-0.000025 rms=0.003133 Jy/beam ! Combined flux in latest and established models = 0.180064 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 0.180064 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=7.613 mas, bpa=-4.273 degrees ! Estimated noise=1.01543 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.002356 Jy ! Component: 100 - total flux cleaned = -0.00249993 Jy ! Component: 150 - total flux cleaned = -0.00250262 Jy ! Component: 200 - total flux cleaned = -0.00246312 Jy ! Total flux subtracted in 200 components = -0.00246312 Jy ! Clean residual min=-0.007152 max=0.007988 Jy/beam ! Clean residual mean=0.000004 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 0.177601 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.177601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074416Jy sigma=1.125091 ! Fit after self-cal, rms=0.074393Jy sigma=1.124919 wmodel J1022-0958_S_2005_07_20_yyk\_map.mod ! Writing 45 model components to file: J1022-0958_S_2005_07_20_yyk_map.mod wobs J1022-0958_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J1022-0958_S_2005_07_20_yyk_uvs.fits wwins J1022-0958_S_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J1022-0958_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198669 Jy ! Component: 100 - total flux cleaned = 0.00297192 Jy ! Component: 150 - total flux cleaned = 0.00308775 Jy ! Component: 200 - total flux cleaned = 0.00266993 Jy ! Component: 250 - total flux cleaned = 0.00206462 Jy ! Component: 300 - total flux cleaned = 0.00158092 Jy ! Component: 350 - total flux cleaned = 0.00130177 Jy ! Component: 400 - total flux cleaned = 0.00103558 Jy ! Component: 450 - total flux cleaned = 0.000516817 Jy ! Component: 500 - total flux cleaned = 0.000183746 Jy ! Component: 550 - total flux cleaned = -0.000223399 Jy ! Component: 600 - total flux cleaned = -0.00046163 Jy ! Component: 650 - total flux cleaned = -0.000771222 Jy ! Component: 700 - total flux cleaned = -0.000844197 Jy ! Component: 750 - total flux cleaned = -0.00106216 Jy ! Component: 800 - total flux cleaned = -0.00106036 Jy ! Component: 850 - total flux cleaned = -0.00113156 Jy ! Component: 900 - total flux cleaned = -0.0012701 Jy ! Component: 950 - total flux cleaned = -0.00160704 Jy ! Component: 1000 - total flux cleaned = -0.00173686 Jy ! Component: 1050 - total flux cleaned = -0.0018659 Jy ! Component: 1100 - total flux cleaned = -0.00192922 Jy ! Component: 1150 - total flux cleaned = -0.00205269 Jy ! Component: 1200 - total flux cleaned = -0.00205315 Jy ! Component: 1250 - total flux cleaned = -0.00217136 Jy ! Component: 1300 - total flux cleaned = -0.0020542 Jy ! Component: 1350 - total flux cleaned = -0.00205349 Jy ! Component: 1400 - total flux cleaned = -0.00188414 Jy ! Component: 1450 - total flux cleaned = -0.00166214 Jy ! Component: 1500 - total flux cleaned = -0.00155378 Jy ! Component: 1550 - total flux cleaned = -0.00144643 Jy ! Component: 1600 - total flux cleaned = -0.00129019 Jy ! Component: 1650 - total flux cleaned = -0.00134277 Jy ! Component: 1700 - total flux cleaned = -0.00129131 Jy ! Component: 1750 - total flux cleaned = -0.00128973 Jy ! Component: 1800 - total flux cleaned = -0.000993229 Jy ! Component: 1850 - total flux cleaned = -0.000993678 Jy ! Component: 1900 - total flux cleaned = -0.00104167 Jy ! Component: 1950 - total flux cleaned = -0.000994439 Jy ! Component: 2000 - total flux cleaned = -0.00104052 Jy ! Total flux subtracted in 2048 components = -0.00103998 Jy ! Clean residual min=-0.002772 max=0.002935 Jy/beam ! Clean residual mean=-0.000006 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.176561 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 207 components and 0.176561 Jy ![Exited script file: muppet] wmap "J1022-0958_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.131 x 7.613 at -4.273 degrees (North through East) ! Clean map min=-0.0049601 max=0.14367 Jy/beam ! Writing clean map to FITS file: J1022-0958_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143675 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000959359 device "J1022-0958_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J1022-0958_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.00319 2.00319 4.00637 8.01274 16.0255 32.051 64.1019 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.131 x 7.613 at -4.273 degrees (North through East) ! Clean map min=-0.0049601 max=0.14367 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1022-0958_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J1022-0958_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1022-0958_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 10:18:07 2006