! Started logfile: J0935-1939_S_2005_07_08_yyk_uvs.log on Fri Jan 20 10:14:49 2006 obs J0935-1939_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0935-1939_S_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.812121 visibilities/baseline/integration-bin. ! Found source: J0935-1939 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0935-1939_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.122698 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=15.07 mas, bpa=-25.14 degrees ! Estimated noise=2.14422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0651258 Jy ! Component: 100 - total flux cleaned = 0.0831786 Jy ! Total flux subtracted in 100 components = 0.0831786 Jy ! Clean residual min=-0.015342 max=0.015027 Jy/beam ! Clean residual mean=0.000053 rms=0.004500 Jy/beam ! Combined flux in latest and established models = 0.0831786 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0831786 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.091555Jy sigma=1.475125 ! Fit after self-cal, rms=0.077034Jy sigma=1.223801 ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=15.07 mas, bpa=-25.1 degrees ! Estimated noise=2.14673 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.918 mas, bmaj=17.08 mas, bpa=-24.83 degrees ! Estimated noise=1.31239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246994 Jy ! Component: 100 - total flux cleaned = 0.0312805 Jy ! Component: 150 - total flux cleaned = 0.0333699 Jy ! Component: 200 - total flux cleaned = 0.0337815 Jy ! Total flux subtracted in 200 components = 0.0337815 Jy ! Clean residual min=-0.005571 max=0.005530 Jy/beam ! Clean residual mean=0.000046 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 0.11696 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 53 components and 0.11696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071948Jy sigma=1.118631 ! Fit after self-cal, rms=0.068455Jy sigma=1.054124 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.918 x 17.08 at -24.83 degrees (North through East) ! Clean map min=-0.0058545 max=0.098372 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04143 ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.06 HN 1.00* KP 0.88 ! LA 0.99 MK 0.96 NL 0.88 OV 0.93 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00512 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00* KP 0.90 ! LA 1.04 MK 1.02 NL 1.00 OV 1.05 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.068455Jy sigma=1.054124 ! Fit after self-cal, rms=0.067831Jy sigma=1.046967 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067831Jy sigma=1.046967 ! Fit after self-cal, rms=0.067764Jy sigma=1.045894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.955 mas, bmaj=16.86 mas, bpa=-24.81 degrees ! Estimated noise=1.30178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302001 Jy ! Component: 100 - total flux cleaned = 0.00375361 Jy ! Component: 150 - total flux cleaned = 0.0040349 Jy ! Component: 200 - total flux cleaned = 0.00411358 Jy ! Total flux subtracted in 200 components = 0.00411358 Jy ! Clean residual min=-0.004808 max=0.003913 Jy/beam ! Clean residual mean=0.000050 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.121074 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 82 components and 0.121074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067692Jy sigma=1.043793 ! Fit after self-cal, rms=0.067642Jy sigma=1.042733 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067642Jy sigma=1.042733 ! Fit after self-cal, rms=0.058683Jy sigma=0.920387 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380453 Jy ! Component: 100 - total flux cleaned = 0.00400371 Jy ! Component: 150 - total flux cleaned = 0.00400526 Jy ! Component: 200 - total flux cleaned = 0.00400586 Jy ! Total flux subtracted in 200 components = 0.00400586 Jy ! Clean residual min=-0.003806 max=0.003494 Jy/beam ! Clean residual mean=0.000008 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.125079 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 0.125079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058426Jy sigma=0.916769 ! Fit after self-cal, rms=0.057516Jy sigma=0.909558 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.955 x 16.86 at -24.81 degrees (North through East) ! Clean map min=-0.0035372 max=0.10109 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057516Jy sigma=0.909558 ! Fit after self-cal, rms=0.057716Jy sigma=0.903241 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057716Jy sigma=0.903241 ! Fit after self-cal, rms=0.057550Jy sigma=0.902157 ! Inverting map and beam ! Estimated beam: bmin=3.891 mas, bmaj=16.86 mas, bpa=-24.59 degrees ! Estimated noise=1.30196 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147697 Jy ! Component: 100 - total flux cleaned = 0.00166772 Jy ! Component: 150 - total flux cleaned = 0.00181335 Jy ! Component: 200 - total flux cleaned = 0.00190117 Jy ! Total flux subtracted in 200 components = 0.00190118 Jy ! Clean residual min=-0.003549 max=0.003228 Jy/beam ! Clean residual mean=-0.000004 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.126981 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.126981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057485Jy sigma=0.901124 ! Fit after self-cal, rms=0.057441Jy sigma=0.900830 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057441Jy sigma=0.900830 ! Fit after self-cal, rms=0.059392Jy sigma=0.899150 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059392Jy sigma=0.899150 ! Fit after self-cal, rms=0.059385Jy sigma=0.898988 ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=16.85 mas, bpa=-24.46 degrees ! Estimated noise=1.31834 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198656 Jy ! Component: 100 - total flux cleaned = 0.00223967 Jy ! Component: 150 - total flux cleaned = 0.00233852 Jy ! Component: 200 - total flux cleaned = 0.00242323 Jy ! Total flux subtracted in 200 components = 0.00242323 Jy ! Clean residual min=-0.003580 max=0.003307 Jy/beam ! Clean residual mean=-0.000011 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.129404 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 133 components and 0.129404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059293Jy sigma=0.897928 ! Fit after self-cal, rms=0.059298Jy sigma=0.897854 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.774 mas, bmaj=19.64 mas, bpa=-8.608 degrees ! Estimated noise=1.53364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000233315 Jy ! Component: 100 - total flux cleaned = -0.000274613 Jy ! Component: 150 - total flux cleaned = -0.00029122 Jy ! Component: 200 - total flux cleaned = -0.000291682 Jy ! Total flux subtracted in 200 components = -0.000291682 Jy ! Clean residual min=-0.003600 max=0.002899 Jy/beam ! Clean residual mean=-0.000016 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.129112 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 138 components and 0.129112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059309Jy sigma=0.897753 ! Fit after self-cal, rms=0.059312Jy sigma=0.897698 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=15.05 mas, bpa=-24.95 degrees ! Estimated noise=2.12843 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0883032 Jy ! Component: 100 - total flux cleaned = 0.1072 Jy ! Component: 150 - total flux cleaned = 0.115531 Jy ! Component: 200 - total flux cleaned = 0.120604 Jy ! Total flux subtracted in 200 components = 0.120604 Jy ! Clean residual min=-0.006067 max=0.006235 Jy/beam ! Clean residual mean=-0.000010 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 0.120604 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.120604 Jy ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=16.85 mas, bpa=-24.46 degrees ! Estimated noise=1.31834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052634 Jy ! Component: 100 - total flux cleaned = 0.00659311 Jy ! Component: 150 - total flux cleaned = 0.00715132 Jy ! Component: 200 - total flux cleaned = 0.00758503 Jy ! Total flux subtracted in 200 components = 0.00758503 Jy ! Clean residual min=-0.003479 max=0.003157 Jy/beam ! Clean residual mean=-0.000009 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.128189 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 0.128189 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.774 mas, bmaj=19.64 mas, bpa=-8.608 degrees ! Estimated noise=1.53364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255151 Jy ! Component: 100 - total flux cleaned = 0.000349419 Jy ! Component: 150 - total flux cleaned = 0.00037458 Jy ! Component: 200 - total flux cleaned = 0.000396358 Jy ! Total flux subtracted in 200 components = 0.000396358 Jy ! Clean residual min=-0.003649 max=0.002862 Jy/beam ! Clean residual mean=-0.000013 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.128586 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 95 components and 0.128586 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=16.85 mas, bpa=-24.46 degrees ! Estimated noise=1.31834 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000233403 Jy ! Component: 100 - total flux cleaned = -0.000191019 Jy ! Component: 150 - total flux cleaned = -0.00011858 Jy ! Component: 200 - total flux cleaned = -8.5429e-05 Jy ! Total flux subtracted in 200 components = -8.5429e-05 Jy ! Clean residual min=-0.003393 max=0.003197 Jy/beam ! Clean residual mean=-0.000009 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.1285 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 107 components and 0.1285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059380Jy sigma=0.898555 ! Fit after self-cal, rms=0.059371Jy sigma=0.898413 wmodel J0935-1939_S_2005_07_08_yyk\_map.mod ! Writing 107 model components to file: J0935-1939_S_2005_07_08_yyk_map.mod wobs J0935-1939_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0935-1939_S_2005_07_08_yyk_uvs.fits wwins J0935-1939_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0935-1939_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000648155 Jy ! Component: 100 - total flux cleaned = -0.000593691 Jy ! Component: 150 - total flux cleaned = -0.000739507 Jy ! Component: 200 - total flux cleaned = -0.00110442 Jy ! Component: 250 - total flux cleaned = -0.00149656 Jy ! Component: 300 - total flux cleaned = -0.00145493 Jy ! Component: 350 - total flux cleaned = -0.00145519 Jy ! Component: 400 - total flux cleaned = -0.00137682 Jy ! Component: 450 - total flux cleaned = -0.00126283 Jy ! Component: 500 - total flux cleaned = -0.00100676 Jy ! Component: 550 - total flux cleaned = -0.000723514 Jy ! Component: 600 - total flux cleaned = -0.000586602 Jy ! Component: 650 - total flux cleaned = -0.000451439 Jy ! Component: 700 - total flux cleaned = -0.000187892 Jy ! Component: 750 - total flux cleaned = -5.87739e-05 Jy ! Component: 800 - total flux cleaned = 9.82791e-05 Jy ! Component: 850 - total flux cleaned = 0.00019086 Jy ! Component: 900 - total flux cleaned = 0.00028145 Jy ! Component: 950 - total flux cleaned = 0.000399707 Jy ! Component: 1000 - total flux cleaned = 0.000485885 Jy ! Component: 1050 - total flux cleaned = 0.000513682 Jy ! Component: 1100 - total flux cleaned = 0.000542061 Jy ! Component: 1150 - total flux cleaned = 0.000652361 Jy ! Component: 1200 - total flux cleaned = 0.000760787 Jy ! Component: 1250 - total flux cleaned = 0.000867063 Jy ! Component: 1300 - total flux cleaned = 0.000866871 Jy ! Component: 1350 - total flux cleaned = 0.000944582 Jy ! Component: 1400 - total flux cleaned = 0.000867751 Jy ! Component: 1450 - total flux cleaned = 0.000867895 Jy ! Component: 1500 - total flux cleaned = 0.00084293 Jy ! Component: 1550 - total flux cleaned = 0.000794251 Jy ! Component: 1600 - total flux cleaned = 0.000794426 Jy ! Component: 1650 - total flux cleaned = 0.000818427 Jy ! Component: 1700 - total flux cleaned = 0.00084216 Jy ! Component: 1750 - total flux cleaned = 0.000795336 Jy ! Component: 1800 - total flux cleaned = 0.000842064 Jy ! Component: 1850 - total flux cleaned = 0.000796336 Jy ! Component: 1900 - total flux cleaned = 0.000864252 Jy ! Component: 1950 - total flux cleaned = 0.000819319 Jy ! Component: 2000 - total flux cleaned = 0.00077473 Jy ! Total flux subtracted in 2048 components = 0.000796643 Jy ! Clean residual min=-0.001411 max=0.001407 Jy/beam ! Clean residual mean=-0.000012 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.129297 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 258 components and 0.129297 Jy ![Exited script file: muppet] wmap "J0935-1939_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.865 x 16.85 at -24.46 degrees (North through East) ! Clean map min=-0.0028152 max=0.1031 Jy/beam ! Writing clean map to FITS file: J0935-1939_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.1031 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000489754 device "J0935-1939_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0935-1939_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42509 1.42509 2.85018 5.70036 11.4007 22.8014 45.6028 91.2057 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.865 x 16.85 at -24.46 degrees (North through East) ! Clean map min=-0.0028152 max=0.1031 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0935-1939_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0935-1939_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0935-1939_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:14:53 2006