! Started logfile: J0932-2016_X_2005_07_09_yyk_uvs.log on Fri Jan 20 11:24:00 2006 obs J0932-2016_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0932-2016_X_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782222 visibilities/baseline/integration-bin. ! Found source: J0932-2016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1480 lines of history. ! ! Reading 1408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0932-2016_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.400x0.400 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.159543 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.04 mas, bmaj=5.318 mas, bpa=-2.231 degrees ! Estimated noise=1.99415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.11594 Jy ! Component: 100 - total flux cleaned = 0.146788 Jy ! Total flux subtracted in 100 components = 0.146788 Jy ! Clean residual min=-0.009903 max=0.013482 Jy/beam ! Clean residual mean=-0.000102 rms=0.003369 Jy/beam ! Combined flux in latest and established models = 0.146788 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.146788 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.067837Jy sigma=1.122931 ! Fit after self-cal, rms=0.067441Jy sigma=1.113535 ! Inverting map and beam ! Estimated beam: bmin=2.04 mas, bmaj=5.318 mas, bpa=-2.231 degrees ! Estimated noise=1.99415 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.366 mas, bmaj=5.775 mas, bpa=-1.401 degrees ! Estimated noise=1.46178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190817 Jy ! Component: 100 - total flux cleaned = 0.027427 Jy ! Component: 150 - total flux cleaned = 0.0321699 Jy ! Component: 200 - total flux cleaned = 0.0342928 Jy ! Total flux subtracted in 200 components = 0.0342928 Jy ! Clean residual min=-0.005991 max=0.004474 Jy/beam ! Clean residual mean=0.000054 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.18108 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.18108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064038Jy sigma=1.038231 ! Fit after self-cal, rms=0.064019Jy sigma=1.037867 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.366 x 5.775 at -1.401 degrees (North through East) ! Clean map min=-0.0058142 max=0.14301 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00716 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 1.00* KP 0.94 ! LA 0.99 MK 1.00* NL 1.01 OV 0.99 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02407 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 1.00* KP 0.90 ! LA 0.98 MK 1.00* NL 0.96 OV 0.96 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.957548 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 1.00* KP 0.91 ! LA 1.03 MK 1.00* NL 1.16 OV 1.14 ! PT 1.12 SC 1.00* ! ! ! Fit before self-cal, rms=0.064019Jy sigma=1.037867 ! Fit after self-cal, rms=0.063613Jy sigma=1.020689 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063613Jy sigma=1.020689 ! Fit after self-cal, rms=0.063611Jy sigma=1.020670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=5.757 mas, bpa=-1.319 degrees ! Estimated noise=1.45281 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000735223 Jy ! Component: 100 - total flux cleaned = -0.000989297 Jy ! Component: 150 - total flux cleaned = -0.00115304 Jy ! Component: 200 - total flux cleaned = -0.00119047 Jy ! Total flux subtracted in 200 components = -0.00119047 Jy ! Clean residual min=-0.003815 max=0.003562 Jy/beam ! Clean residual mean=0.000042 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.17989 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.17989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063514Jy sigma=1.019474 ! Fit after self-cal, rms=0.063526Jy sigma=1.019372 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063526Jy sigma=1.019372 ! Fit after self-cal, rms=0.058844Jy sigma=0.955254 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328247 Jy ! Component: 100 - total flux cleaned = 0.000464813 Jy ! Component: 150 - total flux cleaned = 0.000542817 Jy ! Component: 200 - total flux cleaned = 0.000576333 Jy ! Total flux subtracted in 200 components = 0.000576333 Jy ! Clean residual min=-0.004171 max=0.003816 Jy/beam ! Clean residual mean=0.000041 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.180466 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.180466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058765Jy sigma=0.954332 ! Fit after self-cal, rms=0.058348Jy sigma=0.949413 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.398 x 5.757 at -1.319 degrees (North through East) ! Clean map min=-0.0040352 max=0.14399 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058348Jy sigma=0.949413 ! Fit after self-cal, rms=0.057171Jy sigma=0.928317 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057171Jy sigma=0.928317 ! Fit after self-cal, rms=0.057136Jy sigma=0.927752 ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=5.76 mas, bpa=-0.8592 degrees ! Estimated noise=1.43126 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156893 Jy ! Component: 100 - total flux cleaned = -0.00189266 Jy ! Component: 150 - total flux cleaned = -0.00191715 Jy ! Component: 200 - total flux cleaned = -0.0019186 Jy ! Total flux subtracted in 200 components = -0.0019186 Jy ! Clean residual min=-0.003753 max=0.003763 Jy/beam ! Clean residual mean=0.000022 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.178548 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.178548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057099Jy sigma=0.927036 ! Fit after self-cal, rms=0.057096Jy sigma=0.926969 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057096Jy sigma=0.926969 ! Fit after self-cal, rms=0.057398Jy sigma=0.921840 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057398Jy sigma=0.921840 ! Fit after self-cal, rms=0.057407Jy sigma=0.921733 ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=5.86 mas, bpa=-1.318 degrees ! Estimated noise=1.42194 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183673 Jy ! Component: 100 - total flux cleaned = -0.0021606 Jy ! Component: 150 - total flux cleaned = -0.00221692 Jy ! Component: 200 - total flux cleaned = -0.00221641 Jy ! Total flux subtracted in 200 components = -0.00221641 Jy ! Clean residual min=-0.004103 max=0.003815 Jy/beam ! Clean residual mean=0.000026 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.176331 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.176331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057356Jy sigma=0.920783 ! Fit after self-cal, rms=0.057360Jy sigma=0.920763 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=6.132 mas, bpa=0.2985 degrees ! Estimated noise=1.45915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.46594e-05 Jy ! Component: 100 - total flux cleaned = 0.000143789 Jy ! Component: 150 - total flux cleaned = 0.000187624 Jy ! Component: 200 - total flux cleaned = 0.000249273 Jy ! Total flux subtracted in 200 components = 0.000249273 Jy ! Clean residual min=-0.003952 max=0.003498 Jy/beam ! Clean residual mean=0.000031 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.176581 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.176581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057348Jy sigma=0.920564 ! Fit after self-cal, rms=0.057352Jy sigma=0.920550 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.062 mas, bmaj=5.34 mas, bpa=-2.059 degrees ! Estimated noise=1.97749 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.117602 Jy ! Component: 100 - total flux cleaned = 0.147844 Jy ! Component: 150 - total flux cleaned = 0.161894 Jy ! Component: 200 - total flux cleaned = 0.167271 Jy ! Total flux subtracted in 200 components = 0.167271 Jy ! Clean residual min=-0.005433 max=0.006282 Jy/beam ! Clean residual mean=-0.000027 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 0.167271 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.167271 Jy ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=5.86 mas, bpa=-1.318 degrees ! Estimated noise=1.42194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518845 Jy ! Component: 100 - total flux cleaned = 0.00629756 Jy ! Component: 150 - total flux cleaned = 0.00718311 Jy ! Component: 200 - total flux cleaned = 0.00778104 Jy ! Total flux subtracted in 200 components = 0.00778104 Jy ! Clean residual min=-0.004043 max=0.004062 Jy/beam ! Clean residual mean=0.000022 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.175052 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.175052 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=6.132 mas, bpa=0.2985 degrees ! Estimated noise=1.45915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000658249 Jy ! Component: 100 - total flux cleaned = 0.000815039 Jy ! Component: 150 - total flux cleaned = 0.000888112 Jy ! Component: 200 - total flux cleaned = 0.000955971 Jy ! Total flux subtracted in 200 components = 0.000955971 Jy ! Clean residual min=-0.003940 max=0.003699 Jy/beam ! Clean residual mean=0.000029 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.176008 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.176008 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=5.86 mas, bpa=-1.318 degrees ! Estimated noise=1.42194 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.71894e-05 Jy ! Component: 100 - total flux cleaned = -4.61435e-05 Jy ! Component: 150 - total flux cleaned = 1.10769e-05 Jy ! Component: 200 - total flux cleaned = 6.36216e-05 Jy ! Total flux subtracted in 200 components = 6.36216e-05 Jy ! Clean residual min=-0.004079 max=0.003993 Jy/beam ! Clean residual mean=0.000025 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.176072 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.176072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057418Jy sigma=0.921537 ! Fit after self-cal, rms=0.057416Jy sigma=0.921531 wmodel J0932-2016_X_2005_07_09_yyk\_map.mod ! Writing 37 model components to file: J0932-2016_X_2005_07_09_yyk_map.mod wobs J0932-2016_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0932-2016_X_2005_07_09_yyk_uvs.fits wwins J0932-2016_X_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J0932-2016_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212681 Jy ! Component: 100 - total flux cleaned = 0.000951495 Jy ! Component: 150 - total flux cleaned = 0.00156083 Jy ! Component: 200 - total flux cleaned = 0.00202675 Jy ! Component: 250 - total flux cleaned = 0.00232118 Jy ! Component: 300 - total flux cleaned = 0.00241345 Jy ! Component: 350 - total flux cleaned = 0.00245782 Jy ! Component: 400 - total flux cleaned = 0.00254403 Jy ! Component: 450 - total flux cleaned = 0.00266739 Jy ! Component: 500 - total flux cleaned = 0.00274664 Jy ! Component: 550 - total flux cleaned = 0.00289835 Jy ! Component: 600 - total flux cleaned = 0.00300858 Jy ! Component: 650 - total flux cleaned = 0.00322583 Jy ! Component: 700 - total flux cleaned = 0.00347228 Jy ! Component: 750 - total flux cleaned = 0.00364429 Jy ! Component: 800 - total flux cleaned = 0.0039133 Jy ! Component: 850 - total flux cleaned = 0.00424143 Jy ! Component: 900 - total flux cleaned = 0.00443257 Jy ! Component: 950 - total flux cleaned = 0.00465188 Jy ! Component: 1000 - total flux cleaned = 0.00471322 Jy ! Total flux subtracted in 1024 components = 0.00480409 Jy ! Clean residual min=-0.001669 max=0.001642 Jy/beam ! Clean residual mean=0.000011 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.180876 Jy keep ! Adding 67 model components to the UV plane model. ! The established model now contains 104 components and 0.180876 Jy ![Exited script file: muppet] wmap "J0932-2016_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.399 x 5.86 at -1.318 degrees (North through East) ! Clean map min=-0.0026934 max=0.14124 Jy/beam ! Writing clean map to FITS file: J0932-2016_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.14124 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000687665 device "J0932-2016_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0932-2016_X_2005_07_09_yyk_map.eps/VPS' loglevs 1*100*3*image_rms/peak_flux ! The new contour levels are: ! -1.46063 1.46063 2.92126 5.84252 11.685 23.3701 46.7402 93.4803 print "clev=",int(1*3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.141 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.399 x 5.86 at -1.318 degrees (North through East) ! Clean map min=-0.0026934 max=0.14124 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0932-2016_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0932-2016_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0932-2016_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 11:24:01 2006