! Started logfile: J0909-1808_X_2005_07_09_yyk_uvs.log on Fri Jan 20 10:11:57 2006 obs J0909-1808_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0909-1808_X_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.893333 visibilities/baseline/integration-bin. ! Found source: J0909-1808 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1480 lines of history. ! ! Reading 1608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0909-1808_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.139808 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6909 mas, bmaj=1.807 mas, bpa=-1.07 degrees ! Estimated noise=1.39941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101724 Jy ! Component: 100 - total flux cleaned = 0.124631 Jy ! Total flux subtracted in 100 components = 0.124631 Jy ! Clean residual min=-0.009888 max=0.011324 Jy/beam ! Clean residual mean=-0.000020 rms=0.002167 Jy/beam ! Combined flux in latest and established models = 0.124631 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.124631 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.071870Jy sigma=1.190941 ! Fit after self-cal, rms=0.068966Jy sigma=1.158970 ! Inverting map and beam ! Estimated beam: bmin=0.6896 mas, bmaj=1.806 mas, bpa=-1.021 degrees ! Estimated noise=1.40074 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.884 mas, bmaj=2.241 mas, bpa=-3.43 degrees ! Estimated noise=0.988356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138661 Jy ! Component: 100 - total flux cleaned = 0.0187734 Jy ! Component: 150 - total flux cleaned = 0.019802 Jy ! Component: 200 - total flux cleaned = 0.0202527 Jy ! Total flux subtracted in 200 components = 0.0202527 Jy ! Clean residual min=-0.005746 max=0.006402 Jy/beam ! Clean residual mean=-0.000017 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.144883 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 28 components and 0.144883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067514Jy sigma=1.120801 ! Fit after self-cal, rms=0.067412Jy sigma=1.118796 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.884 x 2.241 at -3.43 degrees (North through East) ! Clean map min=-0.0056906 max=0.11827 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04019 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.99 HN 1.04 KP 0.96 ! LA 0.92 MK 0.96 NL 1.04 OV 1.00 ! PT 0.97 SC 0.84 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00972 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.14 KP 0.87 ! LA 1.03 MK 1.02 NL 0.94 OV 1.08 ! PT 1.00 SC 0.89 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.067412Jy sigma=1.118796 ! Fit after self-cal, rms=0.066944Jy sigma=1.108830 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066944Jy sigma=1.108830 ! Fit after self-cal, rms=0.066950Jy sigma=1.108801 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8746 mas, bmaj=2.187 mas, bpa=-1.589 degrees ! Estimated noise=0.980368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209891 Jy ! Component: 100 - total flux cleaned = 0.00199103 Jy ! Component: 150 - total flux cleaned = 0.00190471 Jy ! Component: 200 - total flux cleaned = 0.00183825 Jy ! Total flux subtracted in 200 components = 0.00183825 Jy ! Clean residual min=-0.005122 max=0.004807 Jy/beam ! Clean residual mean=-0.000020 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.146722 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.146722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066679Jy sigma=1.104843 ! Fit after self-cal, rms=0.066661Jy sigma=1.104634 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066661Jy sigma=1.104634 ! Fit after self-cal, rms=0.058373Jy sigma=0.988781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014179 Jy ! Component: 100 - total flux cleaned = 0.00147734 Jy ! Component: 150 - total flux cleaned = 0.00177539 Jy ! Component: 200 - total flux cleaned = 0.00198377 Jy ! Total flux subtracted in 200 components = 0.00198377 Jy ! Clean residual min=-0.005011 max=0.004186 Jy/beam ! Clean residual mean=-0.000016 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.148705 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.148705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058296Jy sigma=0.985826 ! Fit after self-cal, rms=0.057703Jy sigma=0.977307 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8746 x 2.187 at -1.589 degrees (North through East) ! Clean map min=-0.0046472 max=0.12002 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057703Jy sigma=0.977307 ! Fit after self-cal, rms=0.056967Jy sigma=0.965083 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056967Jy sigma=0.965083 ! Fit after self-cal, rms=0.056910Jy sigma=0.964371 ! Inverting map and beam ! Estimated beam: bmin=0.8653 mas, bmaj=2.151 mas, bpa=-0.6877 degrees ! Estimated noise=0.963999 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165046 Jy ! Component: 100 - total flux cleaned = -5.34525e-05 Jy ! Component: 150 - total flux cleaned = -5.20452e-05 Jy ! Component: 200 - total flux cleaned = -9.21377e-05 Jy ! Total flux subtracted in 200 components = -9.21377e-05 Jy ! Clean residual min=-0.004919 max=0.004361 Jy/beam ! Clean residual mean=-0.000016 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.148613 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.148613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056826Jy sigma=0.963090 ! Fit after self-cal, rms=0.056817Jy sigma=0.962941 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056817Jy sigma=0.962941 ! Fit after self-cal, rms=0.056820Jy sigma=0.958136 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056820Jy sigma=0.958136 ! Fit after self-cal, rms=0.056819Jy sigma=0.958080 ! Inverting map and beam ! Estimated beam: bmin=0.8649 mas, bmaj=2.15 mas, bpa=-0.4815 degrees ! Estimated noise=0.96157 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395757 Jy ! Component: 100 - total flux cleaned = -0.000480953 Jy ! Component: 150 - total flux cleaned = -0.000518864 Jy ! Component: 200 - total flux cleaned = -0.000520729 Jy ! Total flux subtracted in 200 components = -0.000520729 Jy ! Clean residual min=-0.004834 max=0.004369 Jy/beam ! Clean residual mean=-0.000012 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.148093 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.148093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056774Jy sigma=0.957301 ! Fit after self-cal, rms=0.056772Jy sigma=0.957240 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.309 mas, bmaj=4.722 mas, bpa=2.649 degrees ! Estimated noise=1.24104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101072 Jy ! Component: 100 - total flux cleaned = 0.0011349 Jy ! Component: 150 - total flux cleaned = 0.00113662 Jy ! Component: 200 - total flux cleaned = 0.00122564 Jy ! Total flux subtracted in 200 components = 0.00122564 Jy ! Clean residual min=-0.005774 max=0.005537 Jy/beam ! Clean residual mean=-0.000018 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.149318 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.149318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056817Jy sigma=0.957562 ! Fit after self-cal, rms=0.056809Jy sigma=0.957336 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6843 mas, bmaj=1.783 mas, bpa=0.07673 degrees ! Estimated noise=1.365 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.105652 Jy ! Component: 100 - total flux cleaned = 0.130299 Jy ! Component: 150 - total flux cleaned = 0.139405 Jy ! Component: 200 - total flux cleaned = 0.140196 Jy ! Total flux subtracted in 200 components = 0.140196 Jy ! Clean residual min=-0.006212 max=0.005377 Jy/beam ! Clean residual mean=-0.000009 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.140196 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.140196 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8649 mas, bmaj=2.15 mas, bpa=-0.4815 degrees ! Estimated noise=0.96157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460669 Jy ! Component: 100 - total flux cleaned = 0.00546546 Jy ! Component: 150 - total flux cleaned = 0.00603672 Jy ! Component: 200 - total flux cleaned = 0.00630521 Jy ! Total flux subtracted in 200 components = 0.00630521 Jy ! Clean residual min=-0.004864 max=0.004207 Jy/beam ! Clean residual mean=-0.000014 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.146502 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.146502 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.309 mas, bmaj=4.722 mas, bpa=2.649 degrees ! Estimated noise=1.24104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210251 Jy ! Component: 100 - total flux cleaned = 0.00242057 Jy ! Component: 150 - total flux cleaned = 0.00258132 Jy ! Component: 200 - total flux cleaned = 0.00264909 Jy ! Total flux subtracted in 200 components = 0.00264909 Jy ! Clean residual min=-0.005807 max=0.005569 Jy/beam ! Clean residual mean=-0.000019 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.149151 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.149151 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8649 mas, bmaj=2.15 mas, bpa=-0.4815 degrees ! Estimated noise=0.96157 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135796 Jy ! Component: 100 - total flux cleaned = -0.00154111 Jy ! Component: 150 - total flux cleaned = -0.00154046 Jy ! Component: 200 - total flux cleaned = -0.00149116 Jy ! Total flux subtracted in 200 components = -0.00149116 Jy ! Clean residual min=-0.004760 max=0.004198 Jy/beam ! Clean residual mean=-0.000013 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.147659 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.147659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056857Jy sigma=0.958194 ! Fit after self-cal, rms=0.056846Jy sigma=0.958055 wmodel J0909-1808_X_2005_07_09_yyk\_map.mod ! Writing 66 model components to file: J0909-1808_X_2005_07_09_yyk_map.mod wobs J0909-1808_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0909-1808_X_2005_07_09_yyk_uvs.fits wwins J0909-1808_X_2005_07_09_yyk\_map.win ! wwins: Wrote 2 windows to J0909-1808_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328609 Jy ! Component: 100 - total flux cleaned = 0.000532306 Jy ! Component: 150 - total flux cleaned = 0.00100785 Jy ! Component: 200 - total flux cleaned = 0.00120057 Jy ! Component: 250 - total flux cleaned = 0.00138447 Jy ! Component: 300 - total flux cleaned = 0.00162174 Jy ! Component: 350 - total flux cleaned = 0.00191021 Jy ! Component: 400 - total flux cleaned = 0.00230179 Jy ! Component: 450 - total flux cleaned = 0.00257329 Jy ! Component: 500 - total flux cleaned = 0.00289189 Jy ! Component: 550 - total flux cleaned = 0.00320218 Jy ! Component: 600 - total flux cleaned = 0.00350579 Jy ! Component: 650 - total flux cleaned = 0.00380212 Jy ! Component: 700 - total flux cleaned = 0.00399702 Jy ! Component: 750 - total flux cleaned = 0.00428236 Jy ! Component: 800 - total flux cleaned = 0.00469964 Jy ! Component: 850 - total flux cleaned = 0.00492731 Jy ! Component: 900 - total flux cleaned = 0.00528598 Jy ! Component: 950 - total flux cleaned = 0.00568093 Jy ! Component: 1000 - total flux cleaned = 0.00589714 Jy ! Component: 1050 - total flux cleaned = 0.00602517 Jy ! Component: 1100 - total flux cleaned = 0.00631831 Jy ! Component: 1150 - total flux cleaned = 0.00656483 Jy ! Component: 1200 - total flux cleaned = 0.00664658 Jy ! Component: 1250 - total flux cleaned = 0.00688679 Jy ! Component: 1300 - total flux cleaned = 0.00708407 Jy ! Component: 1350 - total flux cleaned = 0.00727845 Jy ! Component: 1400 - total flux cleaned = 0.00743257 Jy ! Component: 1450 - total flux cleaned = 0.00758464 Jy ! Component: 1500 - total flux cleaned = 0.00784688 Jy ! Component: 1550 - total flux cleaned = 0.00803103 Jy ! Component: 1600 - total flux cleaned = 0.00821296 Jy ! Component: 1650 - total flux cleaned = 0.00828455 Jy ! Component: 1700 - total flux cleaned = 0.008321 Jy ! Component: 1750 - total flux cleaned = 0.00849668 Jy ! Component: 1800 - total flux cleaned = 0.00860027 Jy ! Component: 1850 - total flux cleaned = 0.00870242 Jy ! Component: 1900 - total flux cleaned = 0.00873621 Jy ! Component: 1950 - total flux cleaned = 0.00883613 Jy ! Component: 2000 - total flux cleaned = 0.00896844 Jy ! Total flux subtracted in 2048 components = 0.00896926 Jy ! Clean residual min=-0.001905 max=0.001899 Jy/beam ! Clean residual mean=-0.000011 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.156629 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 202 components and 0.156629 Jy ![Exited script file: muppet] wmap "J0909-1808_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8649 x 2.15 at -0.4815 degrees (North through East) ! Clean map min=-0.00338 max=0.11811 Jy/beam ! Writing clean map to FITS file: J0909-1808_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118108 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000608865 device "J0909-1808_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0909-1808_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.54655 1.54655 3.09309 6.18618 12.3724 24.7447 49.4895 98.9789 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8649 x 2.15 at -0.4815 degrees (North through East) ! Clean map min=-0.00338 max=0.11811 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0909-1808_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0909-1808_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0909-1808_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:12:01 2006