! Started logfile: J0903-1721_S_2005_07_08_yyk_uvs.log on Fri Jan 20 10:11:17 2006 obs J0903-1721_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0903-1721_S_2005_07_08_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0903-1721 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0903-1721_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.168982 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=6.486 mas, bpa=-5.61 degrees ! Estimated noise=1.48089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.126602 Jy ! Component: 100 - total flux cleaned = 0.148903 Jy ! Total flux subtracted in 100 components = 0.148903 Jy ! Clean residual min=-0.006209 max=0.008230 Jy/beam ! Clean residual mean=-0.000005 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.148903 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.148903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072550Jy sigma=1.088175 ! Fit after self-cal, rms=0.071727Jy sigma=1.079005 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=8.167 mas, bpa=-5.265 degrees ! Estimated noise=1.03979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00838045 Jy ! Component: 100 - total flux cleaned = 0.011307 Jy ! Component: 150 - total flux cleaned = 0.0124212 Jy ! Component: 200 - total flux cleaned = 0.0125499 Jy ! Total flux subtracted in 200 components = 0.0125499 Jy ! Clean residual min=-0.005156 max=0.006625 Jy/beam ! Clean residual mean=-0.000056 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.161453 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.161453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070652Jy sigma=1.067022 ! Fit after self-cal, rms=0.070656Jy sigma=1.066983 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.213 x 8.167 at -5.265 degrees (North through East) ! Clean map min=-0.0050176 max=0.14748 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01481 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.07 KP 0.95 ! LA 1.09 MK 0.92 NL 0.95 OV 0.92 ! PT 1.05 SC 0.89 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.978298 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.07 KP 0.96 ! LA 1.04 MK 1.00 NL 0.99 OV 0.99 ! PT 1.00 SC 1.13 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.070656Jy sigma=1.066983 ! Fit after self-cal, rms=0.070224Jy sigma=1.060147 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070224Jy sigma=1.060147 ! Fit after self-cal, rms=0.070226Jy sigma=1.060134 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=8.078 mas, bpa=-5.295 degrees ! Estimated noise=1.03581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568445 Jy ! Component: 100 - total flux cleaned = 0.00069114 Jy ! Component: 150 - total flux cleaned = 0.00065655 Jy ! Component: 200 - total flux cleaned = 0.00068557 Jy ! Total flux subtracted in 200 components = 0.00068557 Jy ! Clean residual min=-0.005218 max=0.006055 Jy/beam ! Clean residual mean=-0.000029 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.162139 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.162139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070183Jy sigma=1.059523 ! Fit after self-cal, rms=0.070184Jy sigma=1.059507 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070184Jy sigma=1.059507 ! Fit after self-cal, rms=0.067503Jy sigma=1.024753 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000377879 Jy ! Component: 100 - total flux cleaned = 0.000411229 Jy ! Component: 150 - total flux cleaned = 0.000468418 Jy ! Component: 200 - total flux cleaned = 0.000495398 Jy ! Total flux subtracted in 200 components = 0.000495398 Jy ! Clean residual min=-0.005182 max=0.006091 Jy/beam ! Clean residual mean=-0.000024 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.162634 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.162634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067477Jy sigma=1.024399 ! Fit after self-cal, rms=0.067315Jy sigma=1.022646 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.187 x 8.078 at -5.295 degrees (North through East) ! Clean map min=-0.0050952 max=0.14737 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067315Jy sigma=1.022646 ! Fit after self-cal, rms=0.066182Jy sigma=1.011311 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066182Jy sigma=1.011311 ! Fit after self-cal, rms=0.066171Jy sigma=1.011118 ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.068 mas, bpa=-4.943 degrees ! Estimated noise=1.02346 mJy/beam. ! Added new window around map position (-30.5, 39.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417182 Jy ! Component: 100 - total flux cleaned = 0.00350996 Jy ! Component: 150 - total flux cleaned = 0.00325034 Jy ! Component: 200 - total flux cleaned = 0.00310726 Jy ! Total flux subtracted in 200 components = 0.00310726 Jy ! Clean residual min=-0.004513 max=0.003530 Jy/beam ! Clean residual mean=-0.000025 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.165742 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 73 components and 0.165742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065932Jy sigma=1.003708 ! Fit after self-cal, rms=0.065876Jy sigma=1.002631 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065876Jy sigma=1.002631 ! Fit after self-cal, rms=0.065571Jy sigma=0.998105 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065571Jy sigma=0.998105 ! Fit after self-cal, rms=0.065569Jy sigma=0.998081 ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.035 mas, bpa=-4.712 degrees ! Estimated noise=1.0187 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138698 Jy ! Component: 100 - total flux cleaned = 0.00146657 Jy ! Component: 150 - total flux cleaned = 0.00140909 Jy ! Component: 200 - total flux cleaned = 0.00130728 Jy ! Total flux subtracted in 200 components = 0.00130728 Jy ! Clean residual min=-0.004251 max=0.003459 Jy/beam ! Clean residual mean=-0.000032 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.167049 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 0.167049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065535Jy sigma=0.995746 ! Fit after self-cal, rms=0.065521Jy sigma=0.995465 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.981 mas, bmaj=15.9 mas, bpa=0.8435 degrees ! Estimated noise=1.30287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193617 Jy ! Component: 100 - total flux cleaned = 6.93805e-05 Jy ! Component: 150 - total flux cleaned = 0.000130554 Jy ! Component: 200 - total flux cleaned = 0.000128276 Jy ! Total flux subtracted in 200 components = 0.000128276 Jy ! Clean residual min=-0.005116 max=0.004648 Jy/beam ! Clean residual mean=-0.000064 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.167177 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 0.167177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065564Jy sigma=0.995050 ! Fit after self-cal, rms=0.065564Jy sigma=0.994999 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=6.441 mas, bpa=-5.282 degrees ! Estimated noise=1.44286 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125131 Jy ! Component: 100 - total flux cleaned = 0.147915 Jy ! Component: 150 - total flux cleaned = 0.158372 Jy ! Component: 200 - total flux cleaned = 0.164717 Jy ! Total flux subtracted in 200 components = 0.164717 Jy ! Clean residual min=-0.004789 max=0.005023 Jy/beam ! Clean residual mean=-0.000010 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.164717 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.164717 Jy ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.035 mas, bpa=-4.712 degrees ! Estimated noise=1.0187 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200249 Jy ! Component: 100 - total flux cleaned = 0.00235827 Jy ! Component: 150 - total flux cleaned = 0.00263744 Jy ! Component: 200 - total flux cleaned = 0.00269636 Jy ! Total flux subtracted in 200 components = 0.00269636 Jy ! Clean residual min=-0.004145 max=0.003542 Jy/beam ! Clean residual mean=-0.000037 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.167414 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 64 components and 0.167414 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.981 mas, bmaj=15.9 mas, bpa=0.8435 degrees ! Estimated noise=1.30287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151129 Jy ! Component: 100 - total flux cleaned = 7.47607e-05 Jy ! Component: 150 - total flux cleaned = 3.84733e-05 Jy ! Component: 200 - total flux cleaned = 3.79256e-05 Jy ! Total flux subtracted in 200 components = 3.79256e-05 Jy ! Clean residual min=-0.005091 max=0.004702 Jy/beam ! Clean residual mean=-0.000069 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.167452 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.167452 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.035 mas, bpa=-4.712 degrees ! Estimated noise=1.0187 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.73859e-05 Jy ! Component: 100 - total flux cleaned = 0.00010487 Jy ! Component: 150 - total flux cleaned = 0.000105556 Jy ! Component: 200 - total flux cleaned = 0.000147752 Jy ! Total flux subtracted in 200 components = 0.000147752 Jy ! Clean residual min=-0.004063 max=0.003477 Jy/beam ! Clean residual mean=-0.000035 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.167599 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.167599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065593Jy sigma=0.995608 ! Fit after self-cal, rms=0.065589Jy sigma=0.995535 wmodel J0903-1721_S_2005_07_08_yyk\_map.mod ! Writing 93 model components to file: J0903-1721_S_2005_07_08_yyk_map.mod wobs J0903-1721_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0903-1721_S_2005_07_08_yyk_uvs.fits wwins J0903-1721_S_2005_07_08_yyk\_map.win ! wwins: Wrote 2 windows to J0903-1721_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188041 Jy ! Component: 100 - total flux cleaned = -0.00358664 Jy ! Component: 150 - total flux cleaned = -0.00492427 Jy ! Component: 200 - total flux cleaned = -0.00600539 Jy ! Component: 250 - total flux cleaned = -0.00680001 Jy ! Component: 300 - total flux cleaned = -0.00739601 Jy ! Component: 350 - total flux cleaned = -0.00775988 Jy ! Component: 400 - total flux cleaned = -0.00796009 Jy ! Component: 450 - total flux cleaned = -0.00820342 Jy ! Component: 500 - total flux cleaned = -0.00844032 Jy ! Component: 550 - total flux cleaned = -0.00880834 Jy ! Component: 600 - total flux cleaned = -0.00898756 Jy ! Component: 650 - total flux cleaned = -0.00933816 Jy ! Component: 700 - total flux cleaned = -0.00984868 Jy ! Component: 750 - total flux cleaned = -0.0103065 Jy ! Component: 800 - total flux cleaned = -0.010673 Jy ! Component: 850 - total flux cleaned = -0.0110321 Jy ! Component: 900 - total flux cleaned = -0.0113846 Jy ! Component: 950 - total flux cleaned = -0.0117309 Jy ! Component: 1000 - total flux cleaned = -0.0121082 Jy ! Component: 1050 - total flux cleaned = -0.012477 Jy ! Component: 1100 - total flux cleaned = -0.0127676 Jy ! Component: 1150 - total flux cleaned = -0.0129823 Jy ! Component: 1200 - total flux cleaned = -0.0132989 Jy ! Component: 1250 - total flux cleaned = -0.0136442 Jy ! Component: 1300 - total flux cleaned = -0.0138145 Jy ! Component: 1350 - total flux cleaned = -0.0140499 Jy ! Component: 1400 - total flux cleaned = -0.0143799 Jy ! Component: 1450 - total flux cleaned = -0.01451 Jy ! Component: 1500 - total flux cleaned = -0.0147341 Jy ! Component: 1550 - total flux cleaned = -0.0148918 Jy ! Component: 1600 - total flux cleaned = -0.0151105 Jy ! Component: 1650 - total flux cleaned = -0.015326 Jy ! Component: 1700 - total flux cleaned = -0.0154476 Jy ! Component: 1750 - total flux cleaned = -0.0155984 Jy ! Component: 1800 - total flux cleaned = -0.0157176 Jy ! Component: 1850 - total flux cleaned = -0.0159813 Jy ! Component: 1900 - total flux cleaned = -0.016183 Jy ! Component: 1950 - total flux cleaned = -0.0163258 Jy ! Component: 2000 - total flux cleaned = -0.0165511 Jy ! Total flux subtracted in 2048 components = -0.0166346 Jy ! Clean residual min=-0.002157 max=0.002236 Jy/beam ! Clean residual mean=-0.000028 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.150965 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 233 components and 0.150965 Jy ![Exited script file: muppet] wmap "J0903-1721_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.18 x 8.035 at -4.712 degrees (North through East) ! Clean map min=-0.0031682 max=0.14531 Jy/beam ! Writing clean map to FITS file: J0903-1721_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145311 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000590669 device "J0903-1721_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0903-1721_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21946 1.21946 2.43891 4.87783 9.75566 19.5113 39.0226 78.0453 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.18 x 8.035 at -4.712 degrees (North through East) ! Clean map min=-0.0031682 max=0.14531 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0903-1721_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0903-1721_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0903-1721_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:11:22 2006